Photoshop :: Large Print From Cropped 8MP Sensor (Canon 30D)
Aug 14, 2013
I've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
Here is a 1024 X 1024 export of the photo.
View 4 Replies
ADVERTISEMENT
Jul 11, 2012
I am working on a MacBook Pro running 10.7.4 using CS6 and ACR 7.1.
I was shooting video with the 5DIII yesterday and shot a few stills as I was working. I shot in RAW for the stills. When I look at the still image in Photo Mechanic, I see the full image and Photo Mechanic tells me it's 5760x3840 in size.
When I open the image in Photoshop 6 using Camera Raw it shows up cropped 5760x3240 - the 16x9 video crop. But I can't get to the full image - the crop tool in Camera Raw doesn't let me reveal anymore of the image. How to see the whole photo.
View 12 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Feb 4, 2013
I have found that if I straighten a photo in Lightroom and then export it, it will not print correctly. The photo will print with the edges of the photo not straight with the borders of the paper. The angle the photo is printed askew is the same angle that I used to straighten the photo.
This is only apparent on prints with borders, but I assume it is happening on borderless prints as well.
View 3 Replies
View Related
Sep 7, 2012
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
View 1 Replies
View Related
Mar 27, 2008
I'm looking for a way to print CDs (to Canon ip8500 and ip4300 printers) directly from Photoshop. I'm on x64 where Canon's CD Lable-print won't run, besides which I'd much prefer to print from Photoshop anyway. Is there a plug-in, a work round, a clever trick?
View 6 Replies
View Related
Jun 30, 2011
I use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
View 4 Replies
View Related
Sep 4, 2013
I have stiched together six photos to make a panorama photo. When I go to print that combination photo only one of the six photo shows up in the Print window. Only one photo is printed, not the panorama one. I tried using the Finder > Print box and the copy of the panorama photo I had in a folder on the my desktop. That worked. I want to use photo paper for the print and make some adjustments, that doesn't work from the Finder > Print selection. The original panorama photo was a TIFF file and ended up to be 155MB, but I made a copy in JPEG and that file was 13.2MB.
View 3 Replies
View Related
Aug 27, 2013
CS3 / XP Home. I am trying to print a 7 by 10 in image using my old Canon BJ200 printer. On Page Setup the right margin always default to 2.5 in,despite repeatly input to defferent numbers. I've lowered the image to 300dpi with no effect on print setting.What can I do?
View 4 Replies
View Related
Mar 12, 2013
how to print a color seperation with half tone using photoshop cs6 or cloud suite with a canon mp970 printer with no postcript function
View 1 Replies
View Related
Aug 19, 2012
I have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies
View Related
Jun 24, 2012
I have 1 large photo (33cm x 200cm) i like to print on A3+ paper. Not cropped or reseized, but on about 4 papers i can glue toether after printing and so get 1 large file.
So in all i'm looking for a way to print from PS cs5 so that , part by part, the image is split on the 4 sheets i like to use.
I can of course manually 'cut' the photo into 4 pieces myself, but i really hoped PS CS5 could do this job automaic for me.
Is their a way i simply did not find yet?
View 7 Replies
View Related
Jun 22, 2013
If I want to print on large paper sizes, e.g. A3 or A2, what is common wisdom:
- Set the paper size in LR and let LR blow the photo up;
- Edit a copy in PS and use the PS Size command to blow it up.
I mean if the magnifier routine in LR is the same as in PS one would expect the same result, right?
View 1 Replies
View Related
Jul 9, 2013
All my settings are correct. I have correct paper selected (borderless). All sliders are at ZERO. Aspect ratio of picture is correct. Correct ICC profiles are installed. THIS IS CLEARLY A LIGHTROOM ISSUE! I can print perfectly using Canon's supplied software.
Macbook Pro (new)
Canon Pro-100 Printer
View 4 Replies
View Related
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
View Related
Nov 28, 2011
Draw X5 and Photo-Paint X5 won't print color on Canon iX6500. The print preview is B&W when it should be color and the print is B&W. The printer will print color just fine through any other application with the same printer setup settings. My old Canon ip 4300 will print color through both Corel X5s - no problem. the printer was installed after installing X5 if that matters. I'm thinking about uninstalling and reinstalling the software.
View 4 Replies
View Related
Jan 19, 2012
Right after updating to 3.6 I started having printer problems on my Canon Pro9000. No matter what size I print, all the prints are seriously misaligned. When using any other program I don't have this problem (Just Lightroom Only). Is there a way to go back to the previous version which I think was 3.3 or is there a fix for this?
View 5 Replies
View Related
Apr 2, 2012
I downloaded LR 4.1 RC today. Some of my lenses are not profiled in LR so I then downloaded Lens Profile Downloader Preview 3 to see if there are any profiles available for download. For some lenses I found profiles, but they were not done on the same body that I have (same sensor size though). Can I use profiles for lenses if they are for a camera body that is different than mine, but still the same sensor size? My understanding is that wiht a lens profile LR will automatically correct distortion, vignetting, and CA. Will that work if my body is different than the body used to profile the lens?
View 3 Replies
View Related
Mar 27, 2013
If I scan a 5x7 photo and print it to a large billboard(30ft x 65ft) how much dpi am going to use?
View 2 Replies
View Related
Mar 7, 2013
I am working with Illustrator CS6 and I have to prepare a file that will be printed as a 6 foot x 1.5 foot banner. Actually, it will be several banners; the same design but only the name of the organization will change. I have everything on different layers in the .ai file.
I've done the artwork as an .ai file, everything is a vector, there are no rasterized images in it at all.
The problem is, I'm not sure the best way to save the file to send to the printer. So, do I save the .ai file as a pdf, a pdf/x-1a, pdf/x-3 or pdf/x-4? Should I convert the text to outlines? There's a symbol in the artwork that includes text, does that text have to be converted to outlines as well?
Or should I just send them a file any which-a-way and see how the proof comes back?
View 3 Replies
View Related
Dec 22, 2011
I am trying to publish a set of four drawings to a Canon ipf750. I want to make two collated sets. So far I can't get any plot at all.
View 6 Replies
View Related
Mar 8, 2013
Unable to print from Lightroom to my Canon Pro9000 Mark II Printer, I get an error code 1062.
View 1 Replies
View Related
Jun 7, 2013
I am attempting to isolate a portion of the image and then resize it so that portion is larger. I shoot worth a full frame sensor.
View 2 Replies
View Related
Dec 2, 2011
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
View 7 Replies
View Related
Jun 7, 2013
I need to prepare a very simple poster (one color for back ground and one for the font, no further editing at all) but it has to be around 50x50inch size which is big. I have never worked with such a large images before hence my question.
When I click 'new' and then set print size to 50x50 and 150ppi resolution the file size is around 250mb. Does it really have to be this big? It seems like my laptop cant handle files this big.
Is there some way around it? Vectors? Inscape?
My laptop is Hp Pavilion g6 Core i3
Attached Thumbnails
View 2 Replies
View Related
Jun 25, 2013
For years, we've been printing large documents to our plotter without issue. Suddenly last week, nothing large will print.
I've seen a few different error messages, and have tried different computers, and different versions of Illustrator, but nothing large will print.
When trying to print, I currently get the following:
I've also seen an error suggesting not enough memory is available, which is bogus. And I think another error that was more vague, something to the effect of "can't print"
I've setup a clean install of illustrator on a clean windows install, same issue. I setup an alternate print server with our rip software, same software we've been using for years. Same error on the alternate server.
Nothing changed, and it's effecting everything here, and new installs. I don't know what happened, but this is getting critical, we need the ability to print.
View 12 Replies
View Related
Dec 17, 2013
I have a question about plotting at Canon plotter (Canon imagePROGRAF iPF750) with possible has feature to plot as a drawn area.
Simply say I want to specified only one custom/roll paper size, make it custom size as a default. After that I want to plot exactly the accurate drawn area from my dwg. So with this settings I cannot specified custom paper size for each unique dwg.
For example I'm using this settings with another plotting device -- Xerox WF (picture to see the chosen settings) and working like a charm.
View 1 Replies
View Related
Aug 21, 2011
I'm going to mount double flood lights with a motion sensor at each corner of the house, it will mount on a junction box in the soffit. This would sure save me some time, I searched the web but so far I'm not finding any blocks at all to do this.
View 4 Replies
View Related
Aug 3, 2012
My company will be getting a new large format printer to replace the current one we have. We don't have room enough to have both running at the same time so I'm imagining one-day down then viola, we have a new printer.
How I can prepare for this as far as creating the necessary Plot Styles, pc3, pmp...files? Because i have many items on my to-do list, this could take a day or two with all the testing and i can't image the uproar from our CADers about going without a plotter for two or three days.
View 1 Replies
View Related
Oct 28, 2011
What do you use to Print your large Sheetsets ? Do you use the Publish function within AutoCad ?
Do you use Acroplot or any other 3rd party software ?
I had to print around 80-100 Plan and Profiles Sheets, Sections, Coverpage, Index, Legend, etc.
View 9 Replies
View Related
Dec 19, 2013
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies
View Related
