I use a bog standard canon A480 for all of my photographs, it's a good little camera and does what i want it to do. My question is this, it is set to give a image of 3648x2736 i want to reprint some photographs of the kids on the beach, what sizes would you recommend for output sizes for printing etc.
View 4 RepliesTrying to get an 8x10 print from a digital camera photo on a letter size paper. Reguardless of what we do, the print job only comes up to 8x6.5. How do we get an 8x10???
View 3 Replies View Relatedhow should I size a photograph to attach it in sensible proportions to an e-mail when using Elements 11? In Elements 9 I set the dpi at 72 and then the longest length at 1024mm. he shortest length was set automatically by the programme. Elements 11 doesn't allow me to do this. I've tried starting off with 72 dpi but as soon as I enter the longest length the dpi changes. This did not happen with E9 and in E9 the size of the attachment was measured in KB's but with E11 I finish up with quite large MB sizes.
View 2 Replies View RelatedI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
I just downloaded the PS 6 upgrade, and it runs fine, but won't decode my Canon 5D3 CR2 raw files. All the pages I access only tell how goood Camera Raw is. Where is the correct page?
View 2 Replies View RelatedWhen will Adobe be providing a camera raw update to enable elements 9 to read raw from the new canon G1x
View 3 Replies View RelatedI shoot with the Canon 20D, 30D, 40D, 1DMII, and the Rebel XTI. The Raw processor is showing an anomaly only with the 40D files. When I load raw images, and when the image is displayed, it is shown at one setting. Then in 3 seconds, its updated again at about 1/2 stop brighter. Each time I click on another image on the left column, same thing. The new image is displayed, then 3 seconds later, updated at about 1/2 stop brighter. THe histogram reflects the changes showing the data moving to the right. This only happens with the 40D raw files.
Whats up?
It happens regardless if "Auto" or "Default" is selected. I use "default" as a norm, never letting PS do an auto correction.
How do I stop Camera Raw from doing the second update? This has to stop.
When can we expect to see a plugin for photoshop, to support camera raw for the canon 1Dc. We are in a disparate need ASAP
View 9 Replies View RelatedI have many, many cameras and have used Photoshop and Bridge for years. Even though the latest updates for Camera RAW says it can handle the T4i, I tried opening these files on two separate computers, both running Win 7 64 bit, and my having Photoshop Extended 5+ 64 bit on both computers.
I tried reformatting the camera card, wanting to eliminate that as a possible problem, and the same problem exists.Camera RAW will recognize all of my other cameras, the D Mark III, T3i, Nikon D2x, D3, D3X, so on and so forth, but not the T4i.
I stopped short of doing an image restore on that machine, thinking my installation of Photoshop must have been corrupted when I removed Elements and Preimere Elements, but no...I'm now on an IBM W701 with the same software and I have the same probem.
how do i get camera raw to work in cs5 with a canon t3i?
View 3 Replies View RelatedI've downloaded the update but its not working, I'm using CC.
View 6 Replies View RelatedHow or where to find about Camera RAW support for Canon 5D Mark III in Photoshop ? I have downloaded the new Camera raw update from Adobe web, but it still does not accept its format.
View 9 Replies View RelatedI have to reduce 4 very large TIF files [each one is about 250MB!] to a more manageable size to stitch together and apply as a watermark. They seem to have been taken at about 1.5km above the ground and are very high resolution at 8000x8000.
I still want to retain reasonable resolution at about 250m above the ground so my question is what is the best way to reduce each down?
Would I resizing them in actual size as well as reducing dpi?
I bought a Canon 6D last summer and recently decided to shoot in RAW (.CS2). My previous camera was a Canon Rebel t1i, and RAW files from that camera worked without a hitch. When I try to open raw files from the 6D, I get a notice that I need an update.
So I downloaded and installed the update for Camera Raw, and also downloaded and installed the associated DNG converter.
Is there an update to Camera Raw (CS4!) for the Canon EOS Rebel T3i?
Or, is there an equivelant method for opening CR2 files in PS CS4?
Can I update to Camera Raw 6.4.1 (which is when it started support for the Canon Rebel T3i) with CS4?
After working for a few weeks, Camera Raw has stopped opening Canon 5D Mark II files. Says it is not a readable file format but I know the files are not corrupt because they will open in the Canon utility.
View 5 Replies View Relatedcamera raw 7.0 don't open raw files from canon 5dm3, and i can't apdeit camera raw because ACR6.7 not installed.
View 2 Replies View Related I recently bought a Canon 5d mark iii camera and am having difficulty viewing the raw files on my Mac. The Mac operating software is 10.5.8 and the mac doesnt have intel. Photoshop software is CS3.
I have looked at various plug ins but am struggling to find one that will work. Is there no option to me other than buying a new laptop with the latest photoshop or is there a workaround
The camera RAW plug in does not work anymore since I bought a Canon Eos 700D.
View 5 Replies View RelatedWindows 7 (64 bit) Q6600 Intel 2.4 Quad / 8 GB DDR2 RAM
I have a G6 Canon digital camera that I primarily shoot JPG images with, and wanted to experiment with raw images.
I took about 15 RAW images the other day with this camera and tried to open up. I went to canon and downloaded their Zoombrowser 6.0, which I can view the RAW files, but it does not edit them. I'm looking for something similar to Adobe Camera raw to hopefully view and edit them.
opening the photo. I had to remove the photo for obvious reasons.
I have a Canon 5D Mk lll/Photoshop & Bridge CS6/Camera Raw 7.1 and I still can't open the CR2 files on my Canon.
View 1 Replies View RelatedHow do I download RAW images from a connon camera on photoshop Elements 10??
View 3 Replies View RelatedI'm currently working with Phroshop CS3. I’ve been using for several years a Canon PowerShot G7 and G9 as a second camera. Some days ago I decided to upgrade to the G12. However, for the first time I’ve experimented the following problem. I've shot some RAW images to try the new camera.
I downloaded the image to my computer (a 2007 Dell Precision). I started my Bridge CS3 and only the RAW icon appeared on my screen (no preview). When I try to open any of these images in Camera RAW the software doesn't open it and the following message appears: "Could not complete your request because it is not the right kind of document".
Can Photoshop CS6 (Windows 8) make lens corrections for the Canon PowerShot SX50 HS camera? My version of CS6 (64bit) is Photoshop: 13.0.1 x64 and CameraRaw plug-in is 7.3.0.71. There is a file "Canon PowerShot SX50 HS AdobeStandard.dcp" size 118KB in the folder c:Program DataAdobeCameraRawCameraProfilesAdobeStandard.However when I open a Cameras Raw file (*.CR2 for Canon) in Camera Raw and go to the Lens Corrections window with (under Lens Profile) Make = Canon I cannot find my camera in the drop-down list for Model. The list has 30 items ending with Canon PowerShot S100.
I have tried removing Photoshop, re-installing it and installing the updates, but this has made no change. I have been using Photoshop under Windows 8 since early in October 2012, and everthing else seems to be operating correctly.
Where can I download camera raw 7.3 update for CS4 to read CR2 files from Canon 6d?
View 1 Replies View RelatedPhoto shop elements 10 and lightroom 3 will not recognize raw files from my canon 6D camera .. what should I do?
View 1 Replies View Relatedwill elements 10 process raw files from a Canon 5Dmark3 camera?
View 1 Replies View RelatedI have a new camera, Canon SX50 which produces RAW images called IMG files. I tried to open one in Photoshop Elements 12 and it says it does not handle that file type. I have Windows 7 x64 operating system. I tried to find updates for Elements 12 and don't see any. (I thought I needed a Camera RAW update). What do I do?
View 3 Replies View RelatedI cannot upload pictures from my camera, Canon 7D, into Pnotoshop 10. I recently had Photoshop 7 and had no problems. I do seem to be able to upload pics from a thumbdrive.
View 3 Replies View RelatedI just reinstalled PSE12 and LR5 and cannot open raw files in PSE12. The error message says my camera is not supported. Im using a Canon 70D, my raw format is CR2, and Elements tells my my Camera Raw plug-in is Version 8.
View 1 Replies View RelatedI have a new Canont41 and I can't sign on to elements org
View 5 Replies View Related