Photoshop :: Print Large Image By Tiling Several Normal/small Once
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
ADVERTISEMENT
Mar 31, 2012
I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
View 2 Replies
View Related
Jul 27, 2009
i need to produce a very high quality .jpg as a final product so that a vinyl can be printed the size of 96 in x 24 in....
(it seemed obvious that i make a custom .psd of 24 in. x 96 in., but this could be very wrong so feel free to comment if it is)
i am not a complete newbie at Photoshop but i do not have very much experience ...i no the basics (how program works, tool functions/location etc.)
i have a design in mind and have been researching tutorials etc....so here it is:
i want to background the whole image with "digi camo"....except i want the camo to be orange/purple/white, all the "digi camo" tutorials on line didn't really make a good picture but i actually found a generator website and have attached a photo of the base of the digi camo i want. Now my first task would be i guess "tiling" this pattern to stretch the whole document? I have researched tiling but have been getting awful results from following the tutorials, was hoping someone could help me out with tiling and/or creating a consistent pattern tile so as not to show breaks(visible line) on the final background.
View 6 Replies
View Related
Jun 13, 2010
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies
View Related
Aug 19, 2012
I have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies
View Related
Dec 2, 2011
Is there any work around that will force AutoCad to spool when trying to print a large .tiff image? I am trying to print an image whose file size is 150mb to a plotter.
It doesn't spool at all, it instantly prints (leaving out the image). The image is on a layer set to print etc.
View 7 Replies
View Related
Nov 16, 2013
I have a problem in 3dx max 2014. I can't create a small primitives. Simply disappear and I can't make normal align with small object.
View 6 Replies
View Related
Jul 24, 2013
For example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.
View 2 Replies
View Related
Jan 24, 2014
I'm having an issue with the "Show Print Tiling" menu option not working at all.
Â
I have setup a bleed for my document and have even tried a settings reset.
View 4 Replies
View Related
Feb 11, 2005
I have a texture and I want to fill the image with it as a background.
View 2 Replies
View Related
Apr 2, 2012
I lost a psd due to a hydro shut off and it won`t open. I do though have a version of it at 800 pixels at 150dpi. Can I or is there any way to make that a 300/600 dpi clear like the origional psd?
View 4 Replies
View Related
May 26, 2007
An A4 Aiptek tablet is roughly the same price as an A6 Wacom.
someone who had bought an Aiptek based tablet that did not work.
View 3 Replies
View Related
Sep 12, 2004
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
View 2 Replies
View Related
Nov 12, 2005
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
View 4 Replies
View Related
May 24, 2013
I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Â
Go to effects>
Document Raster Effects>
and select dpi quality
Â
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
Â
I'm running cs6
View 3 Replies
View Related
Oct 23, 2012
I created a logo in ai cs5 that is the size of 7w x 4h. But I wanted to be able to create a larger jpg. Since the vector format allows for the image to be scaled, is there a way to scale it larger, then create a jpg at this larger size? Or, is there a way to scale it to 500% and then save it as a new file with this enlarged size being 100%? I'm fairly new to AI, but have used PS for quite some time.
View 3 Replies
View Related
Mar 16, 2013
Just downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
View 4 Replies
View Related
Mar 23, 2013
Is there a way to tile one of my own images? I want to make a 6x6 image into a 12x12 image so it reproduces a blend of that image 4 times, rather than having 4 images with visible edges.
It was something I could do in PSP years ago when I used it.
View 7 Replies
View Related
May 29, 2013
To make a image spread out more but not getter bigger but copies its pattern into more patterns?
View 1 Replies
View Related
Feb 23, 2013
How can I make the width of a stroke vary in width from large to small like in the attached image on the left side of the cloud?
View 3 Replies
View Related
Sep 7, 2012
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
View 1 Replies
View Related
May 1, 2004
I bought a new computer and got Photoshop Elements 2.0 with it. Great program. My problem is a friend said that Photoshop 6.0 is better. I asked to try this program . I loaded his program on my machine and started to print. All of a sudden my prints appear to be pinkish color and no normal colors. I looked on the web for an answer. Could this program be illegal and something is changing my colors?
View 9 Replies
View Related
Feb 20, 2014
I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever.
Â
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
 Â
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
View 3 Replies
View Related
Jul 15, 2013
I am trying to print a small 4 by 3.25 tag. When folded its 2 by 3.25. However, no matter now high the DPI is set, it still comes out blurry.
View 5 Replies
View Related
Oct 4, 2013
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies
View Related
Sep 19, 2013
In my version of X6 32-bit, there is a problem with the icons in Print Layout, they're not the normal icons, but one's used when tying as script to an icon.
I have re-set X6, using the Shift key method, but the problem is still there. I can use the menus and print, but those icons don't belong there.
View 4 Replies
View Related
Jun 7, 2009
we have been saving super high resolution images in Photoshop by doing a "print to pdf" as we call it. You print the document, but rather than selecting an ordinary printer, you select Adobe PDF. Within the page layout of that printer, you can specify the resolution and document size to print/save, etc. I love it because you don't loose any of the integrity of the image, but the file size always ends up being in the kilabytes, rather than megs. At home, I don't seem to have that printer as an available option. I don't do the installations at my office, so I'm not sure if there is a driver that I need to install, or does that driver only come with Creative Suite?Â
View 4 Replies
View Related
Mar 8, 2013
I have been learning about Textures and I've been playing around with different ones and so I have come across a great site with lots of Texture files for download ...
[URL]......
Â
Well, the files are small eg: 38x38 and 76x76 and how to create a larger image with these small images. Also, they are in .png format... if that matters.
Â
From what I've read a Texture is a Pattern ... right? So, I have searched the FAQ's, the Manual etc. for things like: How to make a large Pattern, How to use a small file for a large Pattern and so forth but I can't find the right info.
Â
Am I suppose to use them to create a Repeating Pattern? Can I do this and have them be seamless?
View 4 Replies
View Related
Apr 3, 2006
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies
View Related
Nov 20, 2013
For my homepage I created and sliced an image for web but when I upload the generated html file and images there are a couple gaps that should not be there. figure this our? You'll notice a larger than normal gap on the images on my homepage:[URL}...
View 2 Replies
View Related
Jul 8, 2007
how to take a normal image ( / alt. link say this one for example) and take it to something like this.
I have no idea how it happened but I'm supposed to replicate the image effect for an update using the first (normal) image.
currently using Photoshop CS3, if it helps.
View 9 Replies
View Related
