how to take a normal image ( / alt. link say this one for example) and take it to something like this.
I have no idea how it happened but I'm supposed to replicate the image effect for an update using the first (normal) image.
currently using Photoshop CS3, if it helps.
For my homepage I created and sliced an image for web but when I upload the generated html file and images there are a couple gaps that should not be there. figure this our? You'll notice a larger than normal gap on the images on my homepage:[URL}...
View 2 Replies View RelatedI usually shoot RAW images.
what should be the normal steps for treating image?
Like fix levels first, or color first or start with shadow higlights ...?
I find it particularly difficult with night shots as I get color noise in my long exposures ..
I converted my catalog from elements 10, the tags are still there, they show up on the right side bar and when I right click the photo, but when I click on the tag the photos are not filtered like I expect.
View 2 Replies View RelatedI am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
After clicking on a keyword in the Keyword List to filter my results, how do you remove that filter to go back to where it was before? I can click on another keyword or I can choose Previous Import under Catalog, though is there another way to remove the most recent keyword filter? A keyboard shortcut?
View 1 Replies View RelatedI am filtering for objects based on layer as shown below.The layer consists of lines and arcs.Is there anyway to convert all these entities into a polyline and get the object id of this single entity.
Dim acTypValArPath(0) AsTypedValue
Dim sf As SelectionFilter = New SelectionFilter(New TypedValue() {New TypedValue(8, "FirstBias")})
Dim ss As SelectionSet = acEditor.SelectAll(sf).Value
Dim idarray As ObjectId() = ss.GetObjectIds()
[code]....
I created a text using the "chip away" filter and really liked the way it looked. Then I wanted to glowing hot filter to add some cracks into the text, to make it look like lava was coming out of it, but every time .
I try this the background turns completely white, or the text just becomes "glowing hot" and the "chip away" filter disappears.
Is there a way to enhance normal image into a UV photo like it is done for normal to infrared photos?
View 2 Replies View RelatedI use a canon 5D Mk3 and a Sony nex 5. On both cameras, at import time, I am likely to have both movie files and still RAW files. I do not import my movie files into Lightroom, I import them into Final Cut Pro X, but I cannot find where in Lightroom I filter the import. At the moment I am having to painstakingly go through the import thumbnails and untick the movie files, which is tedious and prone to error (I missed importing an important RAW file the other day by unticking it by mistake. Lightroom is so professional and quick to use with its presets and customization.
View 5 Replies View RelatedI am looking for a way to extract (filter) all polylines, and loop a lisp based on the number that are found within a "W" selection window.I am frustrated getting "malformed list" or errors, even after defining "n" for repeat.The code I have so far looks like this:
(defun cWW (/ p1 p2 sspw myObj ss)
(setq p1 (getpoint "
Pick first corner: "))
(setq p2 (getcorner p1 "
Specify opposite corner: "))
(if
(setq sspw (ssget "W" p1 p2 '((0 . "*POLYLINE")))
[code].....
Without the (repeat () portion, it was working ok with selection window, however it only would run the commands for a single polyline. What needs to be done without overhauling the code? The lisp has worked on a drawing-wide basis, however needs to run on only on user-windowed polylines since there are other polylines within the drawing which are attached to layouts via viewports.
i don't have a normal cursor, which in my case is an arrow. instead i have what looks like three tiny hands in a row. this makes it very difficult to be accurate when cropping, or tilting. i uninstalled and reinstalled, to no avail. i'm using cs4 extended
View 2 Replies View RelatedEver since I installed CS4 Suite with Photoshop Extended, my Photoshop would crash as soon as I open a file. This would not happen if I am logged on as administrator on my Windows XP, but any other type of profile has the problem.
I tried: reinstallation, clearing the Photoshop preference file, testing whether some startup service is causing it, and created new user profiles, but neither helped.
Since, I did not have this problem with the CS3 suite, I assume that CS4 tries to do something that only administrators are allowed, but what?
I've got this very weird pic. Normally I can remove red eyes, but these are just very hard to deal with.
View 5 Replies View RelatedThere is a strength setting for bump maps under 3d Materials, but is there a way to increase the effect of a normal map in Photoshop CS4?
View 5 Replies View Relatedwant some normal looking type instead of having it sharp or smooth and turn AA off the type looks all weak and cracked, how I get it to look more "normal"?
View 1 Replies View Relateduninstalled all my Nikon viewing etc software and it cleared up. Haven't changed anything since then, but it just started doing it again. Photo looks normal in Adobe camera raw, but when opened from there into CS6 it becomes highly color banded and cartoonish looking. On some pictures it's only happening in the brighter, highlight areas, in others the whole picture is affected. I'm using a high end Alienware computer and didn't have any issues for about the first year, my graphics card drivers are up to date, will check on monitor drivers next I guess.
View 1 Replies View RelatedI was getting brush lag for a few days after installing CS6. every 4 or so normal brush strokes, the brush would start to lag. And after a few lagging strokes it would go back to normal and then repeat itself.
The first thing I did was delete the work spaces that I never use (I doubt that fixed the problem).
Second thing I did was turn the cache levels to 1 and set image previews to "never save" (found this tip online, didn't fix the lag problem but I still kept those settings anyway).
The third thing (and what I believe fixed the problem) was going to "performance" in Photoshop, clicking on the advanced settings for your graphics processor and turning the drawing mode from advanced to basic.
I never had to do this on cs4 which is why it took a few days of tinkering around to fix the problem.
CS6 don't start normal. I should register me für CS6 extended trial.But I don't won't that.
View 4 Replies View RelatedI recently upgraded to Windows 8 and now Photoshop is not functioning as normal when running on Windows 7. Mainly when a modification is made to an image i.e, cropping, unsharp mask, etc. the image will be blacked out, requiring clicking on the canvas area to reacquired the image. Also the canvus changes from my neutral gray setting to a grid or black background when modifications are performed. I reinstalled Photoshop CS6 Ex after the new Windows 8 installation.
View 1 Replies View RelatedHow do I get the normal brush presets back. I am in the middle of editing pictures and the brush presets got changed somehow.
View 1 Replies View Related I have some problems in my photoshop CS6 extended, I found out that the 3D menu work only in basic drawing mode.
But in normal or advanced drawing mode, the 3D menu is grayed out. I use ATI Radeon.
The company I work for has security measures in place which prevent me from modifying any directory within the C: drive. This means, of course, that I can't add fonts to either the system fonts directory or the Adobe/Fonts directory.
Obviously, this is a huge disadvantage, and I'm trying to find a workaround. Any way to make Photoshop find fonts in a different directory? I'm able to create and modify directories on our shared server, so I'd like to create an alternate fonts folder there and point Photoshop toward it.
(I'm using CS4 on a Windows XP 5.1 . I'm a Mac guy at home, so I don't know much about Windows.)
Photoshop itself is and always has been very robust, but Bridge gets persnickety sometimes, reporting low memory or just hanging, and when it hangs it really hangs... Today it was not responding and so I went into Task Manager (Win 7 Pro 64 bit) to end the process. I noticed that is is listed as a 32 bit program (Photoshop.exe is not). Is this normal?
View 3 Replies View Relatedi accidentally hit a wrong key when trying to get the clone stamp going and now it brings up a box with changing icons in it (see upper left of attached image). and it doesn't work. how can i get clone stamp back to normal?
View 6 Replies View RelatedHow do I make a normal photo of a person look like the one below? If its even possible?
View 2 Replies View RelatedI have created image:
The flames' layer has a black background an its blending mode is Screen. I'd like to export the whole thing as a PNG file where the 'hole' in the paper should be transparent (with the overlapping flames still visible). The problem is, when I remove the red background layer, the hole becomes black (because of the black in the flames' layer).
any links to websites that shows you how to turn a normal 2D picture into a photograph?
Like you know, I've some picture I got from the web, and I want to use Photoshop to modify this picture so that it becomes a cool-looking photograph with the edges being flipped a little and there's all those white borders around the picture, like a real photo!
I know of some websites which I saved to my browser's favorites list, but my PC crashed and the links got lost!
Using the brush tool in CS3, I find I have no normal mode to choose in the options toolbar. The available blend modes start with "behind" and end with "luminosity," but there is no normal. Shouldn't I find this option here?
View 3 Replies View RelatedIn Elements 10 when you open a picture only the X for close appears on the menu bar. How can you restore the normal menu bar choices the minimize - and full screen double box choices?
View 1 Replies View RelatedI'm using Elements 11. I imported some photos to my catalog and the program asked if I wanted to import the tags as well. Of course I did and so did the program. However, now when I want to find pictures of a specific person that I tagged in people taggs in elements are separate from the photos in the normal tag with the same name of that person. So I have to review both places to find all of the pictures for that person.
Is there any way to change a normal tag to a "peoples tag" so that I will find all images of that person when I want to find it?
In my opinion it is a little strange that there is now the distinction between two different tag types. If I save the tags to the file via "Save Metadata to Files" then the peoples tags are written in the normal tags section in the files since Windows seems to know only one tag system. So when I import the files again in Elements then naturally the peoples tags are converted to normal tags because it could not distinguish which is which.
Is there a better solution? Can I just combine the normal tags with people tags? It's far too hard to retag all of the photos and the automatic face recognition doesn't work very well in many cases so a lot of work is necessary.
