Photoshop :: Small Photo, Large Resolution?
Nov 12, 2005
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
View 4 Replies
ADVERTISEMENT
Aug 18, 2006
I changed to 6 x 4 resolution. I put the photo paper plus glosssy in my printer and printed it out but it's too small. What happen?
View 4 Replies
View Related
Aug 25, 2012
In Lightroom 4, I need to figure out how large a photo can print and still keep good resolution. I .e., I want to print a photo at 20x30" and I need to know ahead of time that it will look good printed at that size.
View 9 Replies
View Related
Oct 23, 2004
i have some big .jpgs with low resolution say 10x10 inch at 72dpi.
is it possible for me to convert it to 2x2 inch at 300dpi?
View 5 Replies
View Related
Apr 2, 2012
I lost a psd due to a hydro shut off and it won`t open. I do though have a version of it at 800 pixels at 150dpi. Can I or is there any way to make that a 300/600 dpi clear like the origional psd?
View 4 Replies
View Related
May 26, 2007
An A4 Aiptek tablet is roughly the same price as an A6 Wacom.
someone who had bought an Aiptek based tablet that did not work.
View 3 Replies
View Related
Sep 12, 2004
I need to print large photos on a small printer and then mount them together on a large board, but no matter how I do it I seem to get either overlap of gaps between the printed photos. I found a good way to mount the photos so the edges of the paper are not too visible (from a distance), but I can still see gaps and overlays. The Photo image has a width of 24 in by 33 in. I'm trying to print it on nine (9) 8X11 papers.
View 2 Replies
View Related
Mar 31, 2012
I'm trying to make an image 879X593 px into a banner about 950 x 130 px. Is this possible to do this in Photoshop without causing the image to stretch or distort the items inside it? Are there other options even in Fireworks?
View 2 Replies
View Related
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
View Related
Nov 13, 2013
I have recently purchased a Dell XPS15 laptop with a QHD+ (3200x1800) display. The PC is running Windows 8.1. I have also purchased Photoshop Elements 12 to run on it.
Â
With the display at the native resolution, it is necessary to have the "Change the size of all items" option in the display settings of Windows 8.1 set to "Larger", in order for the native Windows fonts and UI elements to be at a reasonable size. The laptop came with this option enabled by default.
Â
However, disappointingly the UI font size in Photoshop Elements is way too small when the display is at the native resolution. The application is basically unusable.
Â
I have tried setting the "Use system font" option in the General preferences, but this doesn't seem to work.
Â
The only way I can get the Photoshop Elements UI font to a reasonable size, is by dropping the screen resolution (to say 1920x1080).
Â
This seems like a terrible waste of a beautiful screen, particularly when my main reason for using the PC is for editing photos, and my photo management and editing software is preventing me exploiting the full resolution of the display.
View 12 Replies
View Related
May 24, 2013
I'm relatively new to using illustrator and im trying to change the dpi of a drawing. One of my frinds made a T-shirt design in a non adobe software program, forget it know, and accidentally draw it at a 100 dpi file and looks blured when changed to a 185x185 pixel size. Can I take that file and change it to 300 dpi?
Â
Go to effects>
Document Raster Effects>
and select dpi quality
Â
I've already done that and it doesn't look like it did anything. Does it need to be redrawn?
Â
I'm running cs6
View 3 Replies
View Related
Oct 23, 2012
I created a logo in ai cs5 that is the size of 7w x 4h. But I wanted to be able to create a larger jpg. Since the vector format allows for the image to be scaled, is there a way to scale it larger, then create a jpg at this larger size? Or, is there a way to scale it to 500% and then save it as a new file with this enlarged size being 100%? I'm fairly new to AI, but have used PS for quite some time.
View 3 Replies
View Related
Sep 5, 2008
Working with PS7 & on XP.
If I want to have a poster be 30x36" (300 dpi) is it safe to create the file in PS one third it's size (10x12") at 600dpi?
Or do you create it at one third its size at 300dpi & then enlarge it by 300%?
View 24 Replies
View Related
May 29, 2006
to add large test to large resolution files, i.e. 4000 pixel files from Canon 5d for example?
When I have small files, 500 or 1000 pixels for web, no problem, but if I try on a bigger, it seems even the largest fonts, look miniscule.
View 8 Replies
View Related
Mar 16, 2013
Just downloaded the trial of Video Studio Pro X6 and am trying it out. I have a past background with Adobe Premiere and even VideoPad, so while I'm not new to video editing, X6 is a little different to me. My two main problems at present are sizing and capture.
I'm trying to figure out how to resize clips that are too small, or too large for that matter, to the mpeg2 standard of 720P (16:9) I usually use. When I put...say...a 640 x 480 clip or still on the timeline there seems to be no tool to change their sizes with (that I have found so far). There are 8 squares that sometimes show up on the image, which allow me to resize, but when finished and I go to do something else, the image just pops back to it's original size. So I must be missing something here.
The second main problem I'm presently having is capturing video...which the program won't do. At present, I am capturing analog video through a USB device. When I try to capture, I get an error message telling me that the capture plug-in is already in use, or is missing, or so on. I have discovered on the web that this problem is very common! Why? I have never had a video capture setup on this particular computer before, so there's nothing on it to interfere with X6. So should I assume that the capture plug-in is not included with the trial? Can this plug-in be downloaded by itself?
View 4 Replies
View Related
Feb 23, 2013
How can I make the width of a stroke vary in width from large to small like in the attached image on the left side of the cloud?
View 3 Replies
View Related
Sep 6, 2013
I am trying to fill my text with a texture or image.
Heres my process:
I type my text, select it and click on the "draw inside" button.
I then go to place and select my image.
The image comes tiny with dimensions of x- 430mm and y-340mm.
Obviously when i stretch it out to cover the text, the image becomes blurry. Whats happening here?
View 2 Replies
View Related
Feb 20, 2014
I have a lot of engineering data, dimensions, etc, to enter into an existing IDCS6 Table. I need whole numbers to display full size, but fractions to be small size. I know I can use Open Type and select the Fractions option for each individual fraction, but that would take forever.
Â
How do I create a style (or whatever) that will allow me to just type in the numbers and have them automatically apply small formatting to the fraction portion of the number whenever it sees a "/"?
 Â
Along a similar line, I was trying to copy table data from a PDF document from Acrobat X Pro and paste that into an IDCS6 table, so each cell is populated by the appropriate cell data from the PDF file, but didn't have any success. That would really save me a lot of time, because I have many complete tables in PDF format. The data is not protected in the PDF, but I'm having a hard time figuring out how to bring it over to IDCS6.
On a Mac, OSX 10.8.5.
View 3 Replies
View Related
Dec 1, 2010
I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.
View 8 Replies
View Related
Oct 4, 2013
I have drawn an assembly of parts and now wish to line up the small hole in the large shell to the projecting pipe,i thought it would be a simple task of using mates (insert aligned) but this does not let me pick on the boundary of the small hole.
View 3 Replies
View Related
Oct 23, 2012
I am producing an 10 x 5 foot trade show display for a client. Even though the image they chose is relatively large (18.7" x 12.5" at 300 dpi), when scaled up it will be about 64 dpi at final size.
I've read that such displays typically use 75-100 dpi images. Where do you find ultra high res stock images? The one we are using is from Istockphoto.
View 6 Replies
View Related
Mar 8, 2013
I have been learning about Textures and I've been playing around with different ones and so I have come across a great site with lots of Texture files for download ...
[URL]......
Â
Well, the files are small eg: 38x38 and 76x76 and how to create a larger image with these small images. Also, they are in .png format... if that matters.
Â
From what I've read a Texture is a Pattern ... right? So, I have searched the FAQ's, the Manual etc. for things like: How to make a large Pattern, How to use a small file for a large Pattern and so forth but I can't find the right info.
Â
Am I suppose to use them to create a Repeating Pattern? Can I do this and have them be seamless?
View 4 Replies
View Related
Feb 4, 2013
I'm not sure where to look for photoshop small edits request, I have a photo I have tried to do some photo shop work with but I am on the edge of being completely useless.
View 9 Replies
View Related
Aug 13, 2012
I am using CS5.5 Extended on a PC with Windows 7.
Â
I am centering a layer with a smaller photo,with a larger background color layer - no biggie, done it many times with no problem...however for some reason when I center horizontally now, it is off by about 3/16th's to the right. I have set up vertical guides, sized the photo layer so both sides are on the side vertical side guides to make sure, selected both layers then do the horizontal centering....still off.
View 2 Replies
View Related
Apr 3, 2006
what Im looking and seen it around other places is like an outer glow but instead of a glow its dots where the dots closest to the object are large and close together and as they move out they get smaller and further apart...
View 8 Replies
View Related
Sep 13, 2012
We have a computer that using AutoCAD Architecture 2013 and Acrobat 9 Standard. When printing a large sheet (30"x42") with images in it to a PDF the images do not appear in the newly created PDF. However, if the same file is printed to fit an 11x17 the images display correctly. Any thoughts as to why the large sheet size is not printing properly?Â
View 1 Replies
View Related
Apr 9, 2012
I am trying to piece together a mock magazine cover using photos and text. If I open a photo it automatically sets it at 72pix/inch. I understand that to print quality text, the resolution needs to be a lot more. Is this photoshop settings or my camera?
View 2 Replies
View Related
Apr 30, 2006
What resolution do I use to enlarge a 3”x4” photo into one that is one that is 3 ‘x4’? I am using S-Spline (PhotoZoom) which is similar to Genuine Fractal to enlarge pictures. I am also using Photoshop 6. Obviously, a photo enlarged to 3’x4’ at 300 dpi would probably crashed my computer. Is there a mathematically way to determine resolution when enlarging photos?
View 2 Replies
View Related
Jan 25, 2013
Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies
View Related
Mar 1, 2012
When I take a photo with my iPhone 4S, which has an 8mp camera, and open it in Photoshop, the resolution is set a 72ppi. How do I get the photo into Photoshop at a resolution which will allow me to print it?
View 3 Replies
View Related
Jul 21, 2009
I am learning Photoshop on my own. I am using CS4. I need some help in understanding the resolution thing.
If I have a photo taken with a digitala camera at 6 megapixel and I want to load it on Photoshop for a few tweaks and adjustments what resolution should I assign? I usually choose 200 pixels/inch.
Secondly, does it affect the image if the resolution assigned on Photoshop is lesser than the camera resolution?
I do not take prints of my Photoshop works. Just in case I need to print them I need to make sure that the resolution is appropriate.
View 1 Replies
View Related
