Illustrator :: Small 1 Inch By 1 Inch Logo For Invoices - Resolution Of 600 DPI
Jan 25, 2013
Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies
ADVERTISEMENT
Oct 7, 2013
If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
View 8 Replies
View Related
Dec 3, 2012
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies
View Related
Apr 5, 2012
how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies
View Related
May 17, 2006
I have a 7.2 MP digital camera. When I upload the images to Photoshop, they show up as 72 pixels/inch by default. How can I have them at 300 pixels/inch? I bought the camera, so I could start doing posters.
View 9 Replies
View Related
Jul 16, 2013
Illustrator measures in 10ths. I need 100ths for a spine width for CreateSpace.
View 2 Replies
View Related
Nov 11, 2012
I tried to export a 48x32 inch file as a jpeg at 300 dpi from CS6 (very basic file).
Immediatly got the message that Illustrator was unable to export at this resolution.
So, I opened the same file in CS5 and it exported it under the same settings with no issue at all?
Does this mean that CS6 export is worse that it was in CS5?
View 25 Replies
View Related
Apr 25, 2013
I cannot set it to .0001 inch, when I do, it automatically changes it to .0002 inch. I've been able to have a nudge factor of .0001 inch since I can remember.
The two images I'm including show my .0001 being typed, then when I switch fields it shows it going to .0002, why won't it stay on .0001 inch?
View 1 Replies
View Related
Jul 31, 2012
I'm trying to figure out the height of my line segment. It has a 1.5 stroke point. How many inches is that?
View 3 Replies
View Related
Mar 2, 2013
I am getting horizontal white lines one inch apart when I print an Ai file
View 13 Replies
View Related
May 21, 2013
Any good way to convert decimal values to fractions for use in inch measurements? I have a script that works great but it returns values like 5.5638 and I'd rather it return the closest fraction answer like 5 9/16. 1/16ths would be great, but I'd settle for 1/8ths.
I started trying to come up with a large if with lots of > and < conditions, but it might be better not to reinvent the wheel.
View 13 Replies
View Related
Mar 1, 2012
What is the optimal number of dpi/inch or dpi/cm to work and to plot a 3m x 0.8m paper /photo paper/ orapaper , RGB or CMYK, are there plotters optimizeds to plot from RGB better CMYK ?
View 10 Replies
View Related
Dec 3, 2012
I am using photoshop to stack 2 frames 12x16 in a 44 inch roll
View 8 Replies
View Related
Nov 9, 2004
while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
View 9 Replies
View Related
Nov 17, 2006
I'm having trouble printing an image that's longer than 11 inches. I have a Canon i560 printer, and use either PS 7 or PS CS.
I want to print an image that's 6 x 16 inches, using 13x19" paper that I've cut in half the long way. I specified Custom (for size), and got approximately the correct width, but it stops printing after 11 inches. I also tried printing a JPG version of the image using WindowsXP print utility, and it allowed me to specify a custom size, but it also stops printing after 11 inches in length.
View 2 Replies
View Related
Feb 7, 2005
I had an 11x14 document set at 175 pix/in. When printed the document was huge (probably 75% too big, maybe more). I was thinking maybe there can only be so many pixels per inch, and because I had it set too high, the dimensions of the doc. were distorted. Anyone know if there is such a magick number?
View 2 Replies
View Related
May 21, 2013
I would like to display actual document sizes (real inches as in 5" X 7") in the print module in Lightroom. I can calibrate pixels per inch for my monitor in Photoshop but can't figure out how to do it in Lightroom - i.e. on my 24" monitor 94 pixels per inch will display my print size document in it's real size on my screen.
View 5 Replies
View Related
Feb 8, 2013
I had a 3 year old imac with CS3 installed, which has failed. I have bought a brand new imac 27", but I was told in the store that this machine is too new to use CS3!
Is it the OS thats too new or the hardware? I'm happy to downgrade my ios to snow leopard or something like that.
View 2 Replies
View Related
Oct 14, 2012
It only happens after Photoshop CS6 (fully updated i Mac and CS6 - see below image for specs) has been running for awhile. The screen, in dark areas of the display, will have screen flicker like stars twinkling on a night sky. Then the display will completely go black and then back on about every 5 seconds. The only way I can make it stop is to power the i Mac off and then start it back up. Then it's fine until the next time I start Photoshop.
It doesn't do it immediately when Photoshop starts. It's usually about 30 - 60 minutes after I've started it. Also if I open Photoshop and use it and then shut it down I don't have any issues...only after it has been running for a while.
View 3 Replies
View Related
Apr 22, 2012
How do you set up a document to print 4 up on a 8.5x11 page. It is a pdf file created to print on a 11x17 page. I am using XP Pro.
View 1 Replies
View Related
Mar 18, 2013
How can I set dimensions to not show inch tick by default just the number?
View 1 Replies
View Related
Jul 30, 2012
I found one motorycle drawing, but there is all dimensions in INCH. How can i change from INCH to centimeter to do this sketch in centimeter. I am never done this before, and I don't know.
If I change dimension in documents (Inventor) to draw in INCH, I cant put there like 3/15 and some little numbers.
how to make changes from INCH to centimeter and to do drawing in Centimeter.
View 4 Replies
View Related
May 8, 2012
I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?
View 1 Replies
View Related
Dec 8, 2012
I heard that the After Effects UI isnt compatible with the Retina display of the 15 inch Retina Macbook Pro. Is there a way to change the resolution to enable the UI to appear sharp? Are there any plug-ins or workarounds to alleviate the non-compatibilty? I'm asking this question because After Effects is the main application I want to be using.
View 10 Replies
View Related
Jul 15, 2012
It happens both by dragging the file into the icon, AND opening up with control click, so i am getting this tiny window.
Of course I can enlarge by numerous command +, or magnify tool, but the idea would be to be able to open it up at a reasonable size.
The worst is when by enlarging, sometimes it turns into a rectangulAR stripe, and I have to enlarge it by pulling the bottom corner.
This happened in the past with different computers and different OS< so the fact that I have the latest Lion is not part of the issue, I hope.
I posted this in the past, unsuccesfully,
View 47 Replies
View Related
Apr 30, 2012
I would like to purchase a Wacom Intuos 5 touch to do image retouching and processing, but I have it difficult to choose the size, medium or large.
View 6 Replies
View Related
Oct 12, 2011
I have many Corel Designer 9 files that use user defined arrowheads.
When I open these files in Designer 12. Every arrowhead is off by 1/4" inch, they are not touching what they need to be touching, as they are in the Designer 9 file.
I have removed the arrowhead in the Des. 9 file and just used a line that is touching the object, saved...Open in Des. 12 and it is still touching the object. So, it's something with the arrowhead.
View 3 Replies
View Related
Dec 28, 2012
Whenever I create a shape, or envelope and add text it, whatever size of font, there is a 0.06-0.063 inch margin created inside the shape. Is this normal? I can not find a way to eliminate this, or change it. When selecting the text, I can change the margins on the ruler, but that only adds to this 0.06 inch margin.
View 6 Replies
View Related
Aug 30, 2011
I have a form with some textbox on it, which should be filled in with imperial dimension. Like foot and inch. Users right now complain about it is not user friendly ,to put data in form, and honestly they are right. I didn't a good job .
Some people like to put vetting in inch and then by the time textbox lost it focus it should automatically convert data to feet-inch format. Some other user like to put decimal I have to be able to should them in 1/8 inch.
some user like to use space as separator between foot and inch and some other like to use dash.
Bottom line I stocked. Is there any function for this in autocad ?
when I look at my code I just struggled with pure string. I thought maybe there is something in autocad which give developer this option. Like the way we input dimension in command prompt.
View 9 Replies
View Related
Nov 14, 2011
im using IV 2011 RS, the spacing of my suffix is like double spaced it looks like 15 " and i want them to look like 15"
View 1 Replies
View Related
Dec 1, 2011
I have a blue rod. How can i change the last inch on each end to a different color such as red ?
View 2 Replies
View Related
