I would like to display actual document sizes (real inches as in 5" X 7") in the print module in Lightroom. I can calibrate pixels per inch for my monitor in Photoshop but can't figure out how to do it in Lightroom - i.e. on my 24" monitor 94 pixels per inch will display my print size document in it's real size on my screen.
View 5 Replieswhile i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View Relatedhow to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies View RelatedSomeone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies View RelatedGIMP 2.8.4 Windows 7 64-bit
Using the native GIMP rotate function to rotate a rectangular image about its center (for instance) the corners of the image which are exposed by the rotation are set to RGB 0x000000 with an alpha value of 0.so that these areas are transparent.
If the same operation is performed as a GEGL operation the corners have RGB values of 0x000000 but alpha values of 255 - i.e. they are solid black.
Is there a setting to cause GEGL to use alpha values of 0 for these pixels? This also applies to GEGL operations such as shear.
If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?
2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.
View 19 Replies View RelatedI have several layers in an image, and I need to align them precisely. The ordinary layer shift ("move pixels") by multiples of pixels is not sufficient. Is there a tool or plugin for PDN that allows sub-pixel shifts (i.e. moves by fractions of pixel)? And rotations by very small angles?
View 6 Replies View RelatedIf I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.
I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.
How do I do this in Photoshop if it can be done?
I've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?
View 9 Replies View RelatedI can see how to lock in an aspect ratio, but can I use Lightroom to crop a photo to a very specific size in pixels so that I can then upload it to a website in a spot of just that size?
View 11 Replies View RelatedWhy does my photos decrease in pixels when i export them onto a disk?
View 1 Replies View Relatedi want to ask on how to resize the images into 1200 pixels wide, how to do it?
View 3 Replies View RelatedI know very little about setting image sizes in LR and usually use Pixrl. I have to have my photos 576 pixels wide and constrain propstions for a website.
View 2 Replies View RelatedI imported pictures, edited all of them, then noticed that they are small, eg. size 190 KB. Trouble!!! Is there any way to link the edited images with the full size images that are of several MB's?? Hate to lose all the work that was done in editing.
View 38 Replies View RelatedI have a couple of bad pixels on my camera, is it possible to map them and auto clone from adjacent area on import?
View 4 Replies View RelatedI have tested this in both LR4 and 4.1RC2. 3.x versions and below I never seemed to have a problem. Using Windows 7 x64 SP1.If I have an export preset that adds a text watermark, it works fine in any image that is either already smaller than, or gets resized to 3118 pixels in height. If I tell it to resize to 3119 pixels, then the watermark is never added.
I usually crop all my images to 8x10 ratio. And then dont resize them at all, so they stay at their maximum resolution.The watermark is simply a TTF Font, set to show up proportionally in the lower right corner.
Here is the 3118 pixels tall image.And here is when it is resized to 3119 pixels tall:
How do I go about setting up LR4 for two monitors?
View 1 Replies View Related1) Additional Zoomrates, such as 1:1.41 - to view an image at 1/2 of the side length.The best would be configurable zoom rates. That should be really easy to do.
2) Zoom to a fixed MP setting. I want to view all my images at 6MP, 12 MP or any other. This would be useful to check the details visible at a certain printsize.
3) Global switch to disable De-Noise rendering. This would speed up handling of D800 files a lot. De-Noise seems to take up most of the performance.
4) Possibility to view original, embedded JPEG Data in JPEG. (i.e. as reference)
5) Auto Histogramm:This function should move the left (black) and right (white) point of the curve to clip black and white at a minimum.
6) Sort and filter images by width and / or height in pixels
7) Sort and filter images by megapixel value
8) Autostack files with same name, such as xxx.NEF + xxx.JPEG. This is useful in case images were not combined at import.
9) When a folder is synchronized missing JPEGs should be removed from RAW+JPEG auto stacks.I see no way to reset this property, although it does not seem to disturb LR that the JPEG is gone.
10) Possibility to do a no-copy export. The purpose: copy the original file to the same name (which of course does nothing) and start an external application (such as RAW converter) with it.
Need setting up my email in lightroom. For some reason it's not connecting.
View 2 Replies View RelatedIs is possible to include the camera WB setting (e.g. daylight, cloudy etc, or temp K) in the LR metadata?
View 1 Replies View RelatedWhere to set this preference in Camera RAW? This note is from the Lightroom 4 ReadMe. I can't seem to fine prefs for "Camera RAW."
Viewing Lightroom settings in Camera Raw
Before working in conjunction with Lightroom and Camera Raw please set the Camera Raw preference to: Save image settings in: Sidecar ".xmp" files. By default Camera Raw will display the image adjustments exactly as performed in Lightroom‟s develop module.
I've tried re-setting my authentication but it's not working.
View 7 Replies View RelatedI have a picture package I want to create. This needs to be the same image on different sized outputs. But you can only create a print package with one custom file size. Is there a way of setting LR to print to different sizes?
I know I can select page size as master size, and print with different sized cells on each page, but I actually want the page size to be different.
For example
page 1 = 8x10 page size, with 8x10 cell
page 2 = 8x12 page size with 8x12 cell
page 3 = 8x6 page size with 8x6 cell
page 4 = 8x6 page size with 2 of 4x6 cells.
I single image, printed on 4 different size pages...
Could you modify the LRtemplate file? Its the global settings bit that concerns me, I dont want a global setting of
_globalSettings = {customFileHeight = 576,customFileWidth = 432,I could do with these file dimensions different for each print.
Can it be done?? has it been done??
even if itspeople pointing me towards different software.
PS - I'm using LR4 but LR5 doesnt have this option either.
I am having a problem setting up Lightroom 4.3 Publishing Services. Each time I click “OK I’ll Authorise button in Flickr it goes to a blank screen with no completion of the process. After many attempts over the last couple of days, this morning I was able to get error message from flickr that says “Oops! Flickr doesn't recognise the "oauth_token" this application is trying to use.” And goes on to say “You don't really need to know what this means, except that you can't use the application until this problem is fixed. (It's a third-party problem, not a Flickr problem).
View 1 Replies View RelatedWhy when I export s DNG to JPG do the develop settings not match between the two? Is it due to the dynamic range?If I export a DNG with no changes to JPG they essentially look the same using proRGB color space.
If I export from DNG to JPG after making changes I find the JPG is consistently over exposed compared to the DNG with the develop settings? So I have something configured incorrectly?
I crop all my pics at 8.5 x 11.How can I change my default to that size instead of highlighting the crop overlay and changing it to 8.5 x 11 for each photo.
View 6 Replies View RelatedIn Lightroom 4.3, I can't seem to figure out how to setup a template that will be 11x14 in size that uses 13x19 paper. Trying to print directly from Lightroom and can't seem to get it setup correctly.
View 2 Replies View RelatedBest practices for setting up systems in a lab environment. We have a lab enviroment of about 200 systems that access AutoCad, Inventor, Mechanical and others.
We need to have a customized interface come up when Autocad is opened by students.I have read that you can do this with profiles and workspaces and also with loading a acad.lsp file.
In the past we have just copied the Windows admin profile used to customize AutoCad to the default profile. In AutoCad 2013 that does not seem to grab everything. It doesn't seem to be the best way to do what we need.
We will also be moving to Windows 7 soon which will also cause an issue.I want to find the best way to do this with out having to deal with the Windows profile.