AutoCAD 2010 :: Rescale Symbols On Drawing From 2 Inch To 1 Inch?
Apr 5, 2012how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Change 8-inch Pipes To 6-inch Without Having To Recreate Network
Dec 3, 2012I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View RelatedIllustrator :: Small 1 Inch By 1 Inch Logo For Invoices - Resolution Of 600 DPI
Jan 25, 2013Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies View RelatedIllustrator :: One Inch Square Box Does Not Draw One Inch
Oct 7, 2013If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
AutoCAD 2010 :: No Inch Mark On Dimensions?
Mar 18, 2013How can I set dimensions to not show inch tick by default just the number?
View 1 Replies View RelatedAutoCAD Inventor :: Inch And Metric Dimensioning On A Drawing
Jun 28, 2013How can I have both Inch & Metric dimensions on a drawing? Preferably, inch above metric below.
View 1 Replies View RelatedAutoCad :: Change Scale Of Completed Drawing From Inch To Mm?
Jun 16, 2012I have a fully completed drawing that is in 'architectural' (inches) and I would like to be able to change all of the 'feet & inches' linear dimensions (which form part of the drawing when the layer is turned on) to solely 'mm' instead.
The UNITS command keeps coming to mind, but I know that's not how to go about it. I've Googled for like 45 mins and read some highly overcomplicated instructions that lost me.
(note I am posting this in the beginners section )
simplified way to change this either via a command or changing settings via the toolbar?
AutoCAD Inventor :: Change From INCH To Centimeter?
Jul 30, 2012I found one motorycle drawing, but there is all dimensions in INCH. How can i change from INCH to centimeter to do this sketch in centimeter. I am never done this before, and I don't know.
If I change dimension in documents (Inventor) to draw in INCH, I cant put there like 3/15 and some little numbers.
how to make changes from INCH to centimeter and to do drawing in Centimeter.
AutoCAD .NET :: Imperial Input From User In Foot Inch
Aug 30, 2011I have a form with some textbox on it, which should be filled in with imperial dimension. Like foot and inch. Users right now complain about it is not user friendly ,to put data in form, and honestly they are right. I didn't a good job .
Some people like to put vetting in inch and then by the time textbox lost it focus it should automatically convert data to feet-inch format. Some other user like to put decimal I have to be able to should them in 1/8 inch.
some user like to use space as separator between foot and inch and some other like to use dash.
Bottom line I stocked. Is there any function for this in autocad ?
when I look at my code I just struggled with pure string. I thought maybe there is something in autocad which give developer this option. Like the way we input dimension in command prompt.
AutoCAD Inventor :: DWG Suffix Inch Mark Spacing?
Nov 14, 2011im using IV 2011 RS, the spacing of my suffix is like double spaced it looks like 15 " and i want them to look like 15"
View 1 Replies View RelatedAutoCAD Inventor :: Blue Rod - Change Color Of Last Inch On Each End
Dec 1, 2011I have a blue rod. How can i change the last inch on each end to a different color such as red ?
View 2 Replies View RelatedAutoCAD Inventor :: Templates To Metric - Changes Back To Inch
May 26, 2012I have changed my settings in all of my templates to metric. I create a new assembly, add the part (yes, it is set to metric), I now create my first new part in the assembly. When I start to sketch it changes back to inch. How do I set it so it stays metric? This is Autodesk Inventor Professional 2012.
View 6 Replies View RelatedAutoCAD 2013 :: Fractional DimStyle With Inch Marks?
May 15, 2012I'm sure this has been addressed in these hollowed posts but a search didn't turn it up. I have a dimstyle with primary units format set to "Fractional" and would like the inch (") marks to come in. I know i can add the inch mark as the suffix, but is there a better way? Archetectural and Engineering formats both include the inch marks and this makes sense to me. But if "fractional" format is not inches, then what would it be?
View 9 Replies View RelatedAutoCad :: Create Drawings And Saving In DXF On 3.5 Inch Disc?
May 20, 2012we are using acad 2006 to create drawings and saving them in dxf on 3.5 inch disc we then import the drawing into winner90 software on our router m/c but get the same response each time on loading - too many lines in iso file-
View 3 Replies View RelatedPhotoshop :: How Much Dpi / Inch To Set
Mar 1, 2012What is the optimal number of dpi/inch or dpi/cm to work and to plot a 3m x 0.8m paper /photo paper/ orapaper , RGB or CMYK, are there plotters optimizeds to plot from RGB better CMYK ?
View 10 Replies View RelatedAutoCAD Inventor :: ILogic - Convert Inch To Architectural Style?
Sep 27, 2011I have a parameter length that is currently in inches and I would like to use it to populate the description but I would like it to be displayed in Architectural style (i.e. 12’-3”). I would also like to have it round up to the nearest 3”.
View 4 Replies View RelatedAutoCAD Civil 3D :: Adjust Elevation Of 6-inch Sewer Pipe In Profile
Oct 11, 2013I think that our file has been corrupted. We tried to adjust the elevation of a 6-inch sewer pipe in the profile and then the display of the pipe went up to a 12-inch, even though the pipe properties still show it as a 6. All the other pipe sizes seem to be working, though we did have a similar problem with 4-inch pipe the day before and fixed it with an audit. Audit does not fix this problem. It seems to apply to all six inch pipes.
The file was created in Civil 3D 2007. We are now using C3D 2012 with SP1. My machine is 64-bit but the other person working in the file has 32-bit.
I have attached the file and the pipe in question is in the sewer network and is named SP B 11.
Is there any hope for this file? Of course this is right as we are trying to meet a deadline.
PS I tried to add the file but was size restricted, then I trimmed the file down to under 1.5 MB and was still size restricted.
Photoshop :: Printing In 44 Inch Roll
Dec 3, 2012I am using photoshop to stack 2 frames 12x16 in a 44 inch roll
View 8 Replies View RelatedPhotoshop :: Amount Of Pixels In An Inch
Nov 9, 2004while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
Photoshop :: Printing A 6 X 16 Inch Print
Nov 17, 2006I'm having trouble printing an image that's longer than 11 inches. I have a Canon i560 printer, and use either PS 7 or PS CS.
I want to print an image that's 6 x 16 inches, using 13x19" paper that I've cut in half the long way. I specified Custom (for size), and got approximately the correct width, but it stops printing after 11 inches. I also tried printing a JPG version of the image using WindowsXP print utility, and it allowed me to specify a custom size, but it also stops printing after 11 inches in length.
Photoshop :: Pixel/Inch Changes Doc. Size ?
Feb 7, 2005I had an 11x14 document set at 175 pix/in. When printed the document was huge (probably 75% too big, maybe more). I was thinking maybe there can only be so many pixels per inch, and because I had it set too high, the dimensions of the doc. were distorted. Anyone know if there is such a magick number?
View 2 Replies View RelatedIllustrator :: CreateSpace - Set 100ths Of Inch?
Jul 16, 2013Illustrator measures in 10ths. I need 100ths for a spine width for CreateSpace.
View 2 Replies View RelatedLightroom :: Setting Pixels Per Inch?
May 21, 2013I would like to display actual document sizes (real inches as in 5" X 7") in the print module in Lightroom. I can calibrate pixels per inch for my monitor in Photoshop but can't figure out how to do it in Lightroom - i.e. on my 24" monitor 94 pixels per inch will display my print size document in it's real size on my screen.
View 5 Replies View RelatedAutoCAD Civil 3D :: Roundup Pipe Lengths In Labels To Nearest 6 Inch Intervals
Sep 27, 2013When labeling pipes in a pipe network; is there a way or expression to roundup the label to 6 inch interval. For example, if I have a pipe length of 2.6 feet, I want to roundup this to 3.0 feet and if I have a pipe length of 2.4 feet, I want to roundup this to 2.5 feet.
View 7 Replies View RelatedPhotoshop :: Installing CS3 On Brand New IMac 27 Inch
Feb 8, 2013I had a 3 year old imac with CS3 installed, which has failed. I have bought a brand new imac 27", but I was told in the store that this machine is too new to use CS3!
Is it the OS thats too new or the hardware? I'm happy to downgrade my ios to snow leopard or something like that.
Photoshop :: Screen Flash When Using CS6 On 27 Inch IMac
Oct 14, 2012It only happens after Photoshop CS6 (fully updated i Mac and CS6 - see below image for specs) has been running for awhile. The screen, in dark areas of the display, will have screen flicker like stars twinkling on a night sky. Then the display will completely go black and then back on about every 5 seconds. The only way I can make it stop is to power the i Mac off and then start it back up. Then it's fine until the next time I start Photoshop.
It doesn't do it immediately when Photoshop starts. It's usually about 30 - 60 minutes after I've started it. Also if I open Photoshop and use it and then shut it down I don't have any issues...only after it has been running for a while.
Photoshop :: Printing 4up On 8.5x11 Inch Page?
Apr 22, 2012How do you set up a document to print 4 up on a 8.5x11 page. It is a pdf file created to print on a 11x17 page. I am using XP Pro.
View 1 Replies View RelatedPhotoshop :: Picture Resolution Not At 300 Pixel/inch
May 17, 2006I have a 7.2 MP digital camera. When I upload the images to Photoshop, they show up as 72 pixels/inch by default. How can I have them at 300 pixels/inch? I bought the camera, so I could start doing posters.
View 9 Replies View RelatedIllustrator :: How To Export 48 X 32 Inch File As JPEG At 300 DPI
Nov 11, 2012I tried to export a 48x32 inch file as a jpeg at 300 dpi from CS6 (very basic file).
Immediatly got the message that Illustrator was unable to export at this resolution.
So, I opened the same file in CS5 and it exported it under the same settings with no issue at all?
Does this mean that CS6 export is worse that it was in CS5?
Illustrator :: CS6 Keyboard Increment / Cannot Set It To .0001 Inch
Apr 25, 2013I cannot set it to .0001 inch, when I do, it automatically changes it to .0002 inch. I've been able to have a nudge factor of .0001 inch since I can remember.
The two images I'm including show my .0001 being typed, then when I switch fields it shows it going to .0002, why won't it stay on .0001 inch?
Lightroom :: Top Print Is Clipped A Quarter Inch
May 8, 2012I printed (2) 7x5 Prints using template browser. The top print is getting clipped about a quarter inch.
In the top left-hand corner both horizontal boxes are stating that the size is 7x5. I have double checked all the settings. Using a Epson 4900 printer sent to US letter, the only thing that is checked is zoon to fit, rotate to fit and show guides. am I doing something wrong or is this a program error that needs to be addressed?