I had an 11x14 document set at 175 pix/in. When printed the document was huge (probably 75% too big, maybe more). I was thinking maybe there can only be so many pixels per inch, and because I had it set too high, the dimensions of the doc. were distorted. Anyone know if there is such a magick number?
View 2 RepliesI'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.
I have a 7.2 MP digital camera. When I upload the images to Photoshop, they show up as 72 pixels/inch by default. How can I have them at 300 pixels/inch? I bought the camera, so I could start doing posters.
View 9 Replies View RelatedConstantly switching the Info Panel from displaying inches to pixels and vice versa?
How to avoid having to do this? I either want to see one or the other, sometimes being able to see both simultaneously would be nice. While dragging out Rectangular Marquees, doing Transforms, etc.
I would like to purchase a Wacom Intuos 5 touch to do image retouching and processing, but I have it difficult to choose the size, medium or large.
View 6 Replies View RelatedUsing Photoshop Elements 10, my photo reduces in size about 1/2 inch when moved onto a piece of paper. What am I doing wrong?
View 1 Replies View Relatedi currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies View Relatedhow to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies View RelatedSomeone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies View RelatedIf I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
I want to create a template whereby I can make a series of images that I can save as jpgs, upload to my blog, and people can print them. When they print, I want them to be one quarter of a sheet of paper (fit four to a page).
I tried creating a new image using the "inches" specification and those inches seem to have no bearing on inches in real life once printed.
So then I figured that a sheet of paper is 8.5 by 11 and I want a resolution of 300 dpi.
So 8.5 times 300: 2,550 pixels. Times that by 0.25 to get a quarter of it: 637.5 (which gets rounded to 638 pixels).
11 times 300: 3,300 pixels. Times that by 0.25= 825 pixels.
So I put in for 638 pixels by 825 pixels and 300 dpi. I created my image. I saved it as a jpg at full resolution. I uploaded it to my site and tested out the printing.
It took up most of a sheet of paper. Not even close to being a quarter of a sheet.
I know Photoshop can do this but is there anyway to make the pixel size not change if im messing with the print size of a photo?
View 6 Replies View RelatedI often have to make borders for certain pictures, and I usually make them at 3px. Sometimes they are nice and thick like 3px should be, but sometimes they come out thin. It doesn't matter whether I am editing on a jpeg or png. Also I edit them in grayscale mode if that helps. I also noticed them problem with the brush, and text tool, as in pixels changing size (going from normal to smaller). I have tried resetting all settings. Should I remove the configuration folder in AppData (I use vista 64 bit)?
I use the pencil tool to make borders.
How do I control being able to see the pixel size of the pencil tool so its not just a small x but I can actually see the size of the area I am going to draw with?
View 1 Replies View Relatedim working on a big poster 300 cm x 300 cm , so when i change the dpi, pixel size changes too...??
View 1 Replies View RelatedI am working on a banner for my Youtube channel, and I want the text to fill the safe text area needed for the banner. Thing is, I don't know how to change the pixel dimensions of a text box.
View 3 Replies View RelatedI usually do photoshop work in an 800 x 600 pixel range. I tried to post a new picture on a website this morning and it came as a 171 x something , tiny little picture that could not be enlarged. How can I increase the size of my pictures? This is my first attempt using the Revel site.
View 2 Replies View RelatedWorking with CS2, is there a special way to match exactly two different images pixel dimesions
View 5 Replies View RelatedSuppose I have a 300px x 300px image and I need to choose a part of that image to crop to 150px x 150px without resampling. (I need that hypothetical 150px x 150px so it fits a pre-defined area in a web page layout.)
I know I can take the crop tool to the image and view the "Info" tab to get my 150px x 150px. But that requires a fine touch and some trial and error to get the exact crop I want.
Is there a way to specify a particular size to crop or select and then move that selection around in the image to find the best crop? (Photoshop 7.0)
Am currently evaluating Photoshop and have a relatively simple question: I need to be able to view the size of the crop area when I draw the marquee... For example: I have a pix that is 2240 pixels by 1488 pixels and I want to crop it to 2000 by 200 to fit into a Flash movie.
When I draw the marquee I expect to be able to view the size I have drawn and also be able to adjust the marquee based upon pixel size.
I have several 35mm images scanned at 8000ppi and are typically around 450Mb (a few are 500+).
The Problem - to get these onto 1 or more of the various sites on the net I need to reduce the filesize (i.e. the Mb count) (e.g. 1 site has limits around the 30Mb mark) B U T ALSO RETAIN the PIXEL count in order to produce the best possible print.
While I can save as a JPEG at something less than 100%, which does this, I am not all that keen in potentially losing some quality.
I am preparing images for the web and I really have 2 questions: one about gifs, and one about jpgs.My standard procedure is to reduce the image to the desired pixel dimensions at 600 dpiThat gives me a crisp small image. then I either use it as is if the file size is low enough (I try for under 600 kb) or convert it to a gif with the save for web and devices tool.
So here are my 2 questions (I will count this solved with either answer)
1) When I convert to a gif I have the 4 boxes: one with original size, the other 3 with options but often the options are too low res for me How do I change my 3 options to start at a higher gif res?
2) If I try to reduce the file size of the jpg in the image size box I set the resolution lower ( 400, 300), which lowers the pixel dimensions and the filesize, but I don't want to cahnge the pixel dimensions. And If I reset the pixel dimensions back to the size I want them, even though it is a lower resolution the file size doesn't change.
How to reduce jpg file size using only the resolution, not pixel dimensions? PS I have tried messing with checking and unchecking the 3 little boxes( scale styles, constrain proportions, and resample) but nothing has worked.
[URL]... My problem is that my images in photoshop look good on their own. But then when I put them into one image they all become blurry. I save them in high quality, I've tried changing the ppi on the "new" document but it only worked a little bit. My Ai text that I place also comes in blurry.
Sometimes I can get them to look fine (aside from the Ai Text, which I do save high quality, or for web, neither of which matter) but when I reduce the image size or flatten the layers, it gets blurry and when I zoom in it's ridiculous how blurry they are. I just tried making it from a large canvas and just reducing the images when I place them, which looks good, but then, like I said, flattening and/or reducing the image both provide the same effect: blurry!
I've never had a problem with this until yesterday. I haven't changed any settings, but for some reason it's just not turning out right. It is decent for when it's at 100% but the end graphic is only 600px so it's small. I'm worried that if my client zooms in to see it better she will see how blurry it is and that will make me look bad.
I need to crop image width from e.g. 1234px to 1230px. I select Crop from the menu, then enter 1230px for the width. PE then shows a marquee that is bigger than the image! I'm probably doing something wrong, but I can't tell what.
I'm running it on WIndows 8.0 x64, which has some other problems, so maybe I should just upgrade to 12?
I have hundreds of scans all from one book and I am trying to straighten and crop them all out to the same pixel amounts. For example, I have a bunch of scans that are 1000x1000 pixels with overscan on all sides, they are also all at an angle. In the end I want a folder with all the pages at 800x800 nice and straight.
So, when I open the first one, I crop and straighten it to 800x800 and then I make a custom specification at 800x800. The problem is, when I go to the next one and hit crop and pic my specification, I find out that that specification is actually for an aspect ration, not a particular dimension. I want it to automatically put the crop window to 800x800, not just restrict the crop to that aspect ratio. If this could be done it would significantly quicken my work flow.
i get a 1 pixel size image when I double click the zoom for 100%.Fit screen or full screen is wacky too, not fitting or filling and sometimes going way beyond.
View 1 Replies View RelatedI just upgraded to CS6 and my font size and leading shortcut on a Mac (Shift + CMND + >) will only increment by one pixel. How can I change it back to two?
View 15 Replies View RelatedI know how to crop images but want to be able to view the resulting pixel measurements (ie, 1600 c 1200 pixels).
View 1 Replies View RelatedI am using Elements 9 and have used Elements since V5. Today I tried to re-size a jpeg and the program would not let me change the pixel size.
View 1 Replies View Related