i get a 1 pixel size image when I double click the zoom for 100%.Fit screen or full screen is wacky too, not fitting or filling and sometimes going way beyond.Â
View 1 Replies
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? Â I thought it was set in the Main CUI file.
View 9 Replies View RelatedCurrently in PS and Camera raw, double-clicking the Hand tool fits the document and double clicking the zoom tool zooms to 100% (1:1 pixels)
This isn't good since it's completely unusable:
- dbl click zoom shows 100% - there's nothing to zoom, since it's zoomed...
- dbl click hand shows the image fit to window - the hand tool wouldn't make anything
Â
switch the current double click behavior on Zoom and Hand tools so:
- dbl click hand shows 100% (1:1 pixels) so I can look around and see details
- dbl click zoom shows fit to window so I can zoom in to a region I want
I used to be able to double click on an image in Loupe view in Library mode and I would zoom into that image. I think that stopped when I got to LR5, I'm in 5.3 now. Now when I double click in Loupe view, I'm back out to grid view. Drop down menu suggests I just need to hit return, same thing happens. This happens at all zoom levels  fit, fill, 1:1, etc. I'm running OSX 10.9.2. Sounds like a setting issue, but I've looked.
View 1 Replies View RelatedI have created a psd file with 5 layers. each layer contains a plain un filled box of various sizes. I have created some actions to toggle the visibility of the layers. The layers represent TV format shapes (16:9 4:3 title safe etc). I want to be able to double click on a jpeg and for it to open in photoshop (ok I know how to do that in windows) as the background layer with the other layers I have already created and saved to a psd file on top. Is this possible?
Also. If I have the image with the layers open can I drag an image into it that becomes the background layer?
Under Windows XP I've installed Photoshop CS2 and CS6 simultaneously, therefore two programs with the same name exist:
...Photoshop CS2photoshop.exe
...Photoshop CS6photoshop.exe
Â
By double click I want to open a *.TIF image by Photoshop CS2 (for certain reasons). I know how to assign an execution program to a file type in Windows XP. Whatever I do – pointing to the CS2 version – the operating system reverts always to the CS6 version. The same problem for In Design and Illustrator.
Since installing CS6 about a month ago, when I double-click on an image and PS is closed, PS will launch but the image doesn't open. If PS is already open, double-clicking works properly. This was an upgrade install and I'm running Mac OS 10.6.8.
View 1 Replies View Relatedi currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies View RelatedI must be using the Enhanced attribute editor the wrong way. Every time I double click the attribute block the enhanced attribute editor opens the dialog box and I have to resize it so a can see all my tags. Then I have to click the tag I want to change then click the value to change it. To change a different tag I have to repeat that process over and over. It makes attributes a complete waste of time. It’s faster to change Mtext or Dtext. I must be doing something wrong. Is there a way to get the dialog box in the image to pop up when I double click the attribute block?
View 3 Replies View RelatedI use Photoshop CS2 to create Designs for webpages. These designs have pixel-exact elements, e.g. a 1-pixel-line from top to bottom.
Now when I zoom in (>100, then I have sort of anti-alias, so that the 1-pixel-line isn't only one blue anymore, but it has different blue tones. I guess for photo manipulations etc. this anti-aliasing zoom is great, but for webdesign it sucks because I don't know if only the zoom make the line "corrupt" or if it really is corrupt.
Is there a way to change this zoom?
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
I have an image of a room, and I want to add the ability to click different parts to zoom in (by scaling up background image) and have the relevant information appear. I don't know if the best way is to have all the "camera zooms" and information on one timeline (have to manually animate everything dissapearing, fiddly), or to separate them into symbols and call them up?
View 3 Replies View RelatedIllustrator CS4
Â
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
Â
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.Â
View 9 Replies View RelatedSince we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedWorking with CS2, is there a special way to match exactly two different images pixel dimesions
View 5 Replies View Relatedbeen eliminated.? Used to be you could right click on the top of the document window and bring up a menu for image size, canvas size etc.
View 13 Replies View RelatedSo we've been sent a DWG file for a large site, that includes a massive aerial (TIF) image.Â
At this point it's too large to even work with so I'd like to scale it down (proportionally, so it will still maintain the same aspect ratio).
For simplicity sake, lets say the image is 15,000 x 15,000 and I want to scale it down to 5,000 x 5,000.
The problem is that AutoCAD seems to use that pixel size to determine the actual scale, so when I updated the new (smaller) image, it was also 3x smaller in the world.
How do I scale down the image independently of the size so it will still maintain the same scale in the CAD world? (I'm a 3D guy so this is akin to scaling down a texture, yet having the plane its projected on maintain its original scale.)
"Image > Print Size" really IS the command you are looking for.
The key is to pay attention to the units-of-measure shown on the Print Size dialogue box:- The "Width" and "Height" values under Print Size are displayed in real-world units (inches, mm, etc.), not image pixels.- The "Resolution" values are displayed in pixels-per-unit.- You cannot change your image's pixel dimensions (aka scale the image) from the Print Size dialogue. That's what the "Scale Image" command is for.Remember the relation between pixel and print sizes is:(print size) = (pixel size) / (print resolution)
When you change the image's print resolution, of course the real-world size (the "width" or "height" shown in the Print Size dialog) of your image will update to reflect the new print resolution -- that value is calculated from your image's actual pixel size and whatever resolution value you just entered. This is totally normal behavior -- in fact, it's expected. If you change an image's resolution from, say, 150 pixels/inch to 75 pixels/inch, this doubles the print size of your image but only the print size; the image's pixel size remains precisely the same as before. (You can confirm this by comparing "Image > Canvas Size..." before and after changing the resolution.)
And as others have stated, if you're using the image for Web viewing then its print resolution has absolutely zero effect on how it will appear onscreen (print resolution only affects, well, actual printing), in which case you'll want to use the "Scale Image" command to actually scale your image larger or smaller.
I just moved Photoshop CS6, Bridge CS6, and Lightroom 4.1 to a new MacBook Pro Retna running Lion 10.7.4Camera Raw 7.1 is installed.
Â
If I double-click a JPG image in Bridge or Mini-Bridge, it will open in Photoshop.If I select a JPG image in Lightroom 4.1 and then select "Edit In" Photoshop CS6, I will get the normal dialog box that asks "What to Edit" with the three options. The image then appears in Photoshop.
Â
If I double-click a CR2 (Canon 5D mk III) image in Bridge or Mini-Bridge nothing happens (the image does NOT open in Camera Raw).If I select a CR2 (same camera) in Lightroom 4.1 Photoshop immediately opens (no "What to Edit" dialog), no image appears in Photoshop and Camera Raw is not launched.If I select a CR2 (same camera) in the Mac Finder, Photoshop is launched with the image in Camera Raw.
Â
How can I fix the behavior of Lightroom, Bridge, and Mini-bridge?
I've created a viewport, selected it and since gone to zoom the relevant image until it is the desired size within the viewport.
I've done this a million times before without a problem, but am having terrible difficulty at the moment.
Once I've zoomed the image to size and subsequently exited the viewport frame (to view the sheet) my image disappears - I believe it just becomes a microdot.
Incidentally, when I initially go to zoom the image to fit the viewport window, I have to use the zoom, extents, 'select all' (CTRL A) and then significantly enlarge the component of the drawing I wish to have fill the viewport window.
Why is it that the zoomed image fills the viewport window when editing the viewport contents and then disappears (turns back into a microdot) when I've finished editing the respective viewport?
I can no longer open Photoshop jpegs by double clicking on the icon, I must go in through the program and find the file name - how can I restore the function short of a re-install which will goof up my preferences, (and possibly be an older version and need updating)?
View 1 Replies View RelatedSome Photoshop tools allow you to change the cancel button into a reset button by holding down the Alt key. The purpose of this button is to reset the tool to its default values.
For 1 or 2 months I noticed that I needed to double-click on the reset button for it to work. Normally you only need a single click.
I got really got fed up with it today, so I did some research. I couldn't find any answers on the internet (including newsgroups), so I decided to close all programs that were running in the background. That solved it. I restarted the computer and started to close one program at a time to see if the problem would go away.
It was already 'bingo' after I cancelled the first suspicious program.
It has to do with the "1-Click Answers" add-on from www.answers.com.
Richt click the program in the system bar, select options/activations and change the default value "Alt + left click" to something else that doesn't conflict or just remove the whole add-on like I did.
I thought it would be useful to know in case your reset button is acting weird and you can't find any answers anywhere.
Is there any way to turn off the 'Double-Click to Close' functionality for creating selections (such as a Polygon selection)? I am making complex selections and accidentally double-clicking with my Wacom pen and it closes the selection when I don't want it to. I have tried setting the Wacom pen preferences for Photoshop but have been unable to affect this issue there. Obviously, I can continue to add to selections, but the premature closing frequently ends up with wacked shaped selection which I must do more work to cleanup. If I could turn off the PS double-click to close functionality it would fix this problem.
View 11 Replies View RelatedPhotoshop cs5.1. I don't like double click title bar to minimize the window. I don't use it, I don't need it. Isn't there a way to disable it!?
I'm unsing Snow Leopard, but I do have "double-click a windows title bar to minimize" disabled in system preferences > appearance. So photoshop overrides those settings? Maybe I'm missing something?
When creating selection marquees, i.e. magnetic lasso, etc., I like to "set" lots of anchors close together when tracing along an object. I can't tell you how many times I've been 98% finished w/ a tedious selection, and accidentally closed a marquee because the system "thinks" I double-clicked. I've set my double-click speed in the windows control panel as fast as it will go, but this still happens. Del does not delete the last anchor point once the selection is finished. It cuts the selection out.
Ideally, I'd like a way to specify an altenative method in PS to finish selections, i.e. SHIFT CTR click, or ENTER, etc.
Does anyone know of there's some registry trick, etc. to accomplish this in Windows w/ CS2 or CS3.
As there a way to do this in PS prefs, etc, that I've totally missed. I just can't imagine I'm the only one having this annoying problem, but I can't find a single mention of it on google with what I felt were good search criteria.
At minimum, I'd be happy with a way to "Undo close selection", so I could resume setting anchors & finish it properly.
I am doing a Total Training class on CS4 PhotoShop. In the section on Learning about Layers I have opened two jpg files.
I double-clicked on the Background Layer of the Statue jpg and changed the name to Statue. All worked okay.
I then selected the unwanted Background area and deleted it.
I then moved the Clouds jpg which created a new Layer. When I double-clicked to change the Layer name to Clouds, the Layer box did not open but the Layer Style box opened.
I was only able to change the name of the Layer via the Layer Properties box.
the pixel outline upon zoomin in cs4 is distracting for meplease help me to get rid of iti cant find how tothanxbeen trying to figure this out for some time it must/should be possible.
View 2 Replies View RelatedI ma on a PC with Windows7 using CS5.5 Extended. I am working on a piece where sometimes I have to deal with just one pixel at a time. If I am making a pixel black I select either a square or round brush, hardness 100, Opacity 100 and Flow 100. I have tried Normal Mode and several other modes but no matter what I always seem to get some bleed(shading) into other pixels and it takes a few clicks to get a solid color.
Â
How do I get the color I want with one click in the pixel without bleed?
