[URL]... My problem is that my images in photoshop look good on their own. But then when I put them into one image they all become blurry. I save them in high quality, I've tried changing the ppi on the "new" document but it only worked a little bit. My Ai text that I place also comes in blurry.
Sometimes I can get them to look fine (aside from the Ai Text, which I do save high quality, or for web, neither of which matter) but when I reduce the image size or flatten the layers, it gets blurry and when I zoom in it's ridiculous how blurry they are. I just tried making it from a large canvas and just reducing the images when I place them, which looks good, but then, like I said, flattening and/or reducing the image both provide the same effect: blurry!
I've never had a problem with this until yesterday. I haven't changed any settings, but for some reason it's just not turning out right. It is decent for when it's at 100% but the end graphic is only 600px so it's small. I'm worried that if my client zooms in to see it better she will see how blurry it is and that will make me look bad.
I have an image that is 912px long and 1px high..There is 1px of green at each end and the the rest is white.I need it to be 150px long 1px high in total.
2px of green (one at each end) and 148px of white in the middle.
E.g. I select a red area in a photo with the magic wand tool. Then I want to reduce it exactly by 2 pixel around and fill the selected area then with lets say blue. After that the formally complete red area is now blue with a 2 pixel red border around it.
Another thing is I open a new plain picture, do a circle selection with the tool Ellipse Select, fill it red. Then I want to reduce the selection by e.g. 10 Pixel around and fill the rest with another color.
I it possible to do do such a reducing or expanding of a selection by pixel?
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
Would it be possible to have an option that allow color picking to pick document's pixel's color, rather than current layer's color with its opacity ?
I really never want to pick a color from a single layer. I always want to pick the color I see, and without its opacity, the one that result from the blend of all layer on the document's pixel on which I pick the color.
I have a cybershot and have it set to 1280 x 960...Fine. The pictures look great but sometimes when I upload to walmart or shutterfly them become pixelated. Or when I use irfanview (PC only program) to resize to something smaller and pixelates them as well.
Should I change the camera settings, if so, to what? Should I use PS to resize them?
I have these PDF catalogs which are about 20 - 50MB each. Some of my customers are not comfortable browsing online so a digital catalog (here) works better for them... The same people generally have bad internet connections so I need to re size these PDF's so they can be downloaded rather quickly.
Starting with a 20MB PDF, I open all slides within Photoshop. I batch process the images from 300dpi to 96dpi , and shrink the size from 24 Inches across to 15... All the images are saved in a new folder, opened back in Photoshop and a new PDF is created. Considering both size and dpi has been clipped by a fairly large amount, you would think that the new PDF would be smaller... But its not, the 20MB version ends up around 60MB afterward.
I don't feel like purchasing Acrobat Pro because I know this should work within Photoshop.
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I have 900 photos/ scans that are all large in size. I know want to make them suitable for a web site ie 72/91dpi and around 1024*768 px in size . thought the save for web choice via an action was the way to go ie create the action and then run as a batch.
I have been told that you can reduce the number of pixels in a picture, but keep the size of it.I am unsure about this, so I thought I would ask the experts as it were.I do know the JPEG image compression when saving, but is there any way you can specify the number of pixels?
I have a Sony camera and have it set to take big pictures with high reso.
In PS, can I reduce the size 3 MB to something a lot smaller but still keep ok quality? I go to Image Size but that just makes the pic smaller (duh) I want to change the actual file size.
wanted to put all my holiday photos on a picture-sharing site (Photobucket), but it seemed they were too big and it took forever. It was suggested that I reduce their size on Adobe Photoshop and I have downloaded it (Starter Edition 3.2). However, I can't seem to find a facility to do this. What I would really like to do is reduce all of the file sizes at once. Is this possible? Otherwise I will reduce them one by one, but don't know how to do this either.
I read somewhere that in Photoshop you should reduce images in steps, but never in one big step. For example, if you had an original 3200 pixels wide, you should first reduce it to 3100 pixels wide, then 3000, then 2900, and so on, down to about 2000; then, if your target is 800 pixels, you may increase the interval.
Does this rule of thumb still hold true in CS4? I've tried one-step reductions, and these tired old eyes could not tell the difference ...
Working in Adobe Photoshop CS. I have a tif file that is 36"x36" at 150dpi. Flattened image; Grayscale mode. File size is 28.499MB. Is there any way to reduce the file size other than change it to a jpeg? I need to email it somewhere and they can't accept files over 20MB.
I created a 1318x358 PNG (300DPI, Anti-Aliasing - Type Optimized) from Illustrator. Now I reduced the image in Photoshop from 1318 to 800 pixels, and it is creating some edge blurring. Look at the image below.
How can I take away that blurring effect when reducing the size? Even if I save it as PNG-24, with highest quality settings, it still does that effect.
Hotkey "," for reducing tool size is not working. Nothing happens when I press the key.Settings for text program East Asian?? I am in Western Europe (Denmark)...When I want to view a photo at 100% zoom it takes up more screen space than it should. A photo of 8.5cm width measures at 100% 26.5cm on the screen.
I'm using C5 Extended and have been using PS for years and suddenly I'm seeing something I haven't encountered before. My font sizes are being reduced "to the closest integer" which goes to 624.14 pt. My image is only 1000px x 150px so I'm not sure where the measurement discrepancy is happening.
I noticed it first when I made a copy of a box of text and then tried to drag the text copy.
I had a question on reducing the image size after editing in Photoshop.
After doing my changes in Lightroom, I typically make edits in Photoshop and then do some final touchups back in Lightroom. The RAW file from my camera is approximately 24 MB. After making my edits in PS, the TIFF file it produces (with all layers flattened) is in the 60 MB range.
My question is, if before sending in back to LR, I change the image size in PS say to 12 MB or so, am I basically creating a lossy jpg file? Meaning -- by reducing that TIFF file size down to 12 MB am I throwing out important information such that when I go back to LR I am losing information and won't have as much control as the 60MB TIFF file?
keep upwards of 80MB per image (due to the RAW + edited file). I don't want to lose imporant information so I will if I have to, but would prefer not.
I have a corrupt version or if there's a setting I'm not aware of. When I try to change the size of my canvas on screen (zoom in or out) but don't want to take the time to select the magnifying glass tool, I typically just type a percentage in the small percentage box lower left corner of my canvas.Sometimes this works fine. Sometimes it doesn't and it actually changes the opacity of whatever layer I'm on instead?? I don't want it to serve this function. I can change opacity in my layers pallette. How can I turn this function off?
I am using photoshop 7, I am trying to reduce jpg images around 1 mb sized at about 2400 x 1800. I am trying to reduce the image down to about 5 centimeters and retain the sharpness. I have found that my images are blurring a fair bit.
I'm having difficulty organizing photos into templates for a CD cover. The pic that I want to have on the front cover is too large and need to reduce the size, but at the same time keep sharpness and quality.
I have a background that has 8.5" x 11" external dimensions. In the project bin, I'm also showing a layer (with transparent edges) that I've resized to 1" x 1.5". When I double-click the background to put it on the screen, and then drag the layer onto the screen, why doesn't it look like a small picture on top of a big one? Instead, it's huge, and I have to drag it down to size with the move tool!
And now, the entire story:
Running PSE9 under Mac OS X 10.6.8 Snow Leopard.
My project is a montage of stamp-sized images on a letter-size background, as in the attached -- commemorating the woman in the centerpiece. I've stumbled though this kind of effort before with great success. This time the small photos are coming out blurry, and it's because this time I've done one thing differently.
In prior efforts, I recall somehow reducing the outside dimensions of an open file to about 2" x 3" before editing and finally adding it as a layer to the big background (using Move Tool to size it to fit), although during editing I was working with a reasonably-sized image and not a stamp (probably using command +). The images in the final version were all sharp. On this effort, however, cannot remember how to do it the same way, and I ended up working with the original photo, and then when I added it as a layer, I reduced it using the move tool -- very clumsy in view of the fact that the edited layer's image seemed to be larger than the canvas I was building, and the final images were blurry.
I have made this artwork in illustrator (included an image of it below). it is for newspaper print. When i export it to Illustator PDF the size is MASSIVE 40mb! I sent this to them via a link hoping to get away with it but they replied & said please send as 3mb as the file it to big! What am i going to do now? I have flatterened transparency & rasterized everything in Illy but it only makes it larger.
the size of the overall artwork is W:262mm H:190mm
I made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
I have a 3D model that consists of a large number of "small" objects that i created earlier in separate files. The problem is that now my model is 50Mb and I am having trouble working with it. Is there a way of reducing size, or is there any other solution that would not change the geometry of my model?
Working with Intel Quad Core, 6Gb of ram and ATI Radeon HD3800.
