I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
Â
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
I have several pictures that are over 1 mb in size. I need to get them down to under 100 kb for my wall charts to print.How to do?
View 1 Replies View RelatedI have to reduce 4 very large TIF files [each one is about 250MB!] to a more manageable size to stitch together and apply as a watermark. They seem to have been taken at about 1.5km above the ground and are very high resolution at 8000x8000.
I still want to retain reasonable resolution at about 250m above the ground so my question is what is the best way to reduce each down?
Would I resizing them in actual size as well as reducing dpi?
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies View RelatedHAving just installed 2.8 after using 2.6, I find all scanned images and existing jpeg files I created in 2.6 are displayed at ridiculously large dimensions. In 2.6, all scanned images were loaded on screen at their actual A4 size, regardless of scan resolution. In 2.8 they are loading up on screen at around 5 times the actual size - it seems I have to scale the image back down to A4 before I can start editing it? I tested this on A4 jpeg files I created on 2.6, and they also load on screen at massively enlarged sizes. how to get these images to display at their actual sizes?
View 2 Replies View RelatedI'm using Gimp 2.8 on Fedora 17 i686. I have noticed that when I cancel out of set image canvas size and return to set image canvas size I have no preview image. I was wondering if this is a problem with Gimp
View 1 Replies View RelatedI'm having problems with gimp 2.8 I've just installed on my new laptop. I'm an artist and use scanned images to colour in GIMP, and in version 2.6 these were displayed with the actual canvas size (A4) and scan resolution. I work with these images and often need to increase the canvas size. In 2.8 the scanned images are displaying with a canvas size around 5 times larger than A4 - I think this is because GIMP is saying the resolution is 72ppi, whereas I scan at 300-400 ppi. My finished jpeg files all display on 2.8 at larger canvas sizes aswell. how to get GIMP to recognize this automatically so that the actual canvas size is shown?
View 3 Replies View RelatedI have to use the Image > Canvas Size option to resize the size of my canvas to a wanted size. However this means a lot of trial and error to get the canvas size the same size of my current selection. Is there a quick function that would resize the canvas size to my current selection?
View 2 Replies View RelatedHow can I get my gimp windows to return to their original size - they are very large and remain that way? Shrink wrap only only holds while working on the image, then large again.
View 1 Replies View RelatedI increased my document from 8.5"x11" to 22"x34" and a black line of the original document remains. It is not selectable - the word "x page" appears when my cursor hovers on it. I'm working in C6.
View 4 Replies View RelatedBristle brushes have an option near their size sliders named "restore to original size" ... but for some brushes, this option is resetting brushes to another size other than the original size appearing on the brush swacthes.
View 1 Replies View RelatedI have a folder of 50 images. The images are all different sizes and dimensions (ranging from about 400x600 to 1600x900).
Separately, I have a little design on a canvas in HD dimensions (1920x1080).
The end goal is just to be able to lay out all the photos on the center of the canvas as 50 new individual images (with the HD dimensions of the background canvas).
Obviously, to load in 50 unique images and then export each of them would take a long time. So I was hoping that there is a way to both (a) automatically combine multiple unique images to a common background, and then (b) export them all.
I used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies View RelatedI'm searching a perfect source that can work for a scaling System which is best and recommended to match canvas size.
View 1 Replies View RelatedMy picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
View 7 Replies View Related1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
Can someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
Is it possible to automate the following: I have a directory of about 50 jpg files. With each file I would like to:
- make the image square, by increasing the canvas size of the least dimension. ie if the width is less than the height, increase the width to the value of the height, or conversely if the height is less than the width
- add a transparency layer
- save to xcf
I'm trying to scale a pattern to fit the entire canvas without tiling it over the whole layer. To try to do this, I made a rectangular selection box, then dragged and dropped a pattern into the box. This created a new layer called "clipboard". I right clicked the clipboard layer, then left clicked "Scale Layer". Then I entered a width and height in pixels that matched the size of the canvas. The selection does expand, but it doesn't fill the entire canvas.
View 11 Replies View RelatedI drag the graphed box to scale an image down (or up) and after clicking "scale" the image size decreases but the original box is there (original size). Why?
View 5 Replies View RelatedI have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View RelatedIn photoshop 7, I create a graphic. But most of the time the default size of the canvas is bigger than the graphic. How can I "snap," the canvas size to the picture size?
View 2 Replies View RelatedI'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedWhen I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View RelatedI have a cybershot and have it set to 1280 x 960...Fine. The pictures look great but sometimes when I upload to walmart or shutterfly them become pixelated. Or when I use irfanview (PC only program) to resize to something smaller and pixelates them as well.
Should I change the camera settings, if so, to what? Should I use PS to resize them?
My text was working fine til today, now when I try typing text, it is showing as a blank box, until I click outside of it, then it shows as a blue dotted line on the text. Then when I send it to the laser, it is not there!( laser engraver or the printer). I just want the text to be normal, like it was 2 days ago! Before, I could click anywhere, type, and it showed up with no problems!
View 7 Replies View Related