GIMP :: Unable To Scale A Selection To Match Canvas Size
Mar 7, 2013
I'm trying to scale a pattern to fit the entire canvas without tiling it over the whole layer. To try to do this, I made a rectangular selection box, then dragged and dropped a pattern into the box. This created a new layer called "clipboard". I right clicked the clipboard layer, then left clicked "Scale Layer". Then I entered a width and height in pixels that matched the size of the canvas. The selection does expand, but it doesn't fill the entire canvas.
View 11 Replies
ADVERTISEMENT
Apr 3, 2013
I'm searching a perfect source that can work for a scaling System which is best and recommended to match canvas size.
View 1 Replies
View Related
Mar 16, 2011
I have to use the Image > Canvas Size option to resize the size of my canvas to a wanted size. However this means a lot of trial and error to get the canvas size the same size of my current selection. Is there a quick function that would resize the canvas size to my current selection?
View 2 Replies
View Related
Aug 12, 2009
When i select the history brush, i keep getting this message.
'Could not use the art history brush because the current canvas size does not match that of the history state'
View 1 Replies
View Related
Dec 6, 2012
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.
View 5 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Jun 10, 2011
I have tried unsuccessfully to figure out how to color match in GIMP. I found a tutorial for photoshop, but for whatever reason I cannot translate it to GIMP. Tutorial is here:
[URL].......
I am designing wedding invites for my sister's wedding, and want to match the color of her preferred flower to the flower bunch I'm placing on her invite. This is the bunch I'm using:
This is the color I need to apply to the bunch I'm using:
View 5 Replies
View Related
Feb 10, 2012
I have a vertical (rectangular) photo that I have pasted into a square canvas. I am looking to expand the photo to the edges of the canvas in a specific way: I want to stretch the edges of the photo (not the whole photo) such that the closer the photo edge is to the edge of the canvas the more stretched it is.
View 1 Replies
View Related
Dec 27, 2011
I don't seem to be able to click on the canvas in GIMP. I installed a tablet(Wacom Bamboo) and assumed that the pen wasn't working correctly until I realised that I couldn't click with my mouse either. The mouse and tablet work fine in other programs. It didn't have the problem until I installed the driver for the tablet(I think). I can use any feature that doesn't involve clicking on the canvas(adjusting curves, scaling, changing the saturation, etc.), I just can't do things like make a selection, or use the paintbrush.
I'm using GIMP 2.6.11 on Ubuntu 11.04.
View 5 Replies
View Related
Sep 6, 2012
HAving just installed 2.8 after using 2.6, I find all scanned images and existing jpeg files I created in 2.6 are displayed at ridiculously large dimensions. In 2.6, all scanned images were loaded on screen at their actual A4 size, regardless of scan resolution. In 2.8 they are loading up on screen at around 5 times the actual size - it seems I have to scale the image back down to A4 before I can start editing it? I tested this on A4 jpeg files I created on 2.6, and they also load on screen at massively enlarged sizes. how to get these images to display at their actual sizes?
View 2 Replies
View Related
Jun 9, 2013
why are we not able to edit layers outside the canvas?
I often create images were the canvas size is fixed (e.g. display resolution). I then add layers to it that are often larger than the canvas. I would now want to select the superfluous parts of the just added images (e.g. to make them transparent), but I can't select parts of the layers that are not on canvas!
I also can not see any layer content that is off-canvas. A workflow I'd prefer would be copy everything somewhere (not necessarily inside the canvas) and then align it layer by layer, which is hard when one can not see the content of the off-canvas layers.
View 6 Replies
View Related
Jul 22, 2012
I'm using Gimp 2.8 on Fedora 17 i686. I have noticed that when I cancel out of set image canvas size and return to set image canvas size I have no preview image. I was wondering if this is a problem with Gimp
View 1 Replies
View Related
Sep 7, 2012
I'm having problems with gimp 2.8 I've just installed on my new laptop. I'm an artist and use scanned images to colour in GIMP, and in version 2.6 these were displayed with the actual canvas size (A4) and scan resolution. I work with these images and often need to increase the canvas size. In 2.8 the scanned images are displaying with a canvas size around 5 times larger than A4 - I think this is because GIMP is saying the resolution is 72ppi, whereas I scan at 300-400 ppi. My finished jpeg files all display on 2.8 at larger canvas sizes aswell. how to get GIMP to recognize this automatically so that the actual canvas size is shown?
View 3 Replies
View Related
Jun 9, 2012
I have a folder of 50 images. The images are all different sizes and dimensions (ranging from about 400x600 to 1600x900).
Separately, I have a little design on a canvas in HD dimensions (1920x1080).
The end goal is just to be able to lay out all the photos on the center of the canvas as 50 new individual images (with the HD dimensions of the background canvas).
Obviously, to load in 50 unique images and then export each of them would take a long time. So I was hoping that there is a way to both (a) automatically combine multiple unique images to a common background, and then (b) export them all.
View 2 Replies
View Related
Dec 20, 2013
I used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies
View Related
Sep 21, 2013
How can I scale a selection fast and easy within a python-script, so fast as I would do within the Gimp-interface: Toolbox->Scale->set Transformation to Selection->scale the selection and ready...
First I have tried
sel = pdb.gimp_selection_save(myImg)
pdb.gimp_item_transform_scale(sel,...)
pdb.gimp_image_select_item(myImg,0,sel)
But it takes some seconds! (gimp interface method needs milliseconds).
When I omit the first step (no selection_save first), then there will be a floating selection, and that isn't really what I want.
View 3 Replies
View Related
Dec 26, 2013
Is it possible to automate the following: I have a directory of about 50 jpg files. With each file I would like to:
- make the image square, by increasing the canvas size of the least dimension. ie if the width is less than the height, increase the width to the value of the height, or conversely if the height is less than the width
- add a transparency layer
- save to xcf
View 6 Replies
View Related
Nov 4, 2013
Is there a plugin that allows real-time rotate/scale of a selection (like in photoshop) ? The way it works stock is the only annoying thing in gimp that makes my work unnecessarily harder.
View 7 Replies
View Related
May 16, 2012
I notice with GIMP 2.8 that I can't type in numeric values if I want to scale/rotate/etc. a selection. I can use the mouse to manipulate my selection freely, but I'm pretty out of luck if I want an exact value (though I know that I can hold Ctrl for certain snapping, which is extremely useful).
View 1 Replies
View Related
Apr 9, 2012
However I thought I will learn by experimenting and loaded a JPEG image. The image has a white border. I wanted to remove the border so selected it with magic wand and tried the delete command. Nothing happened! I tried to google around and came across floating layer. Checked this too. Saved the image as GIMP image opened but the border refuses to leave the image. How can I remove this border and make it transparent?
View 2 Replies
View Related
Sep 13, 2012
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies
View Related
Feb 23, 2012
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies
View Related
Jun 3, 2011
When I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
View 2 Replies
View Related
Feb 25, 2013
why I can't stroke a selection after rotating it? The steps to reproduce this problem are simple:
1. Make any selection (e.g. a rectangle)
2. Click "Edit", and note that "Stroke selection" is not greyed out
3. Use the "rotate" tool on the selection. Click the selection, and specify any angle.
4. After the selection has been rotated, click "Edit" again, and note that "Stroke selection" is greyed out and unusable.
I'm using Gimp 2.8.4.
View 5 Replies
View Related
Aug 19, 2012
I want to scale down the size of each image in a set of 125 photos, to save storage space in my computer. How can I do this other than one at a time?
View 1 Replies
View Related
Oct 6, 2008
How do you see the size of a selection (in pixels?). In Photoshop this would be in the info dialogue window. I'm not finding the equivalent in GIMP (2.6).
View 6 Replies
View Related
Aug 21, 2012
I want to make a business card, for that i need to paste a illustration onto the basic layer. the illustration i cut out from a other document is too big, how can i make the selection smaller so i can paste it onto the document?
View 2 Replies
View Related
Oct 26, 2012
I'm a former Photoshop user. The reason I no longer use it is because of a silly misunderstanding with the NSA and MI6. But hey, that's the past and I'm a believer in moving on.
Anyway, my first inquiry here is a simple one having to do with selection. When I used PS I would at times use the wand selector and then open a new file which already had the dimensions of the selection. Thing is, when I select something in Gimp and open up the new file it still has the same size as the main image from which an area was selected, i.e., if the main image was 500x500 and I selected something 100x100 the copy was still 500x500.
And I can assure you it has nothing to do with remote viewing and foreign embassies.
View 3 Replies
View Related
Feb 19, 2013
I drag the graphed box to scale an image down (or up) and after clicking "scale" the image size decreases but the original box is there (original size). Why?
View 5 Replies
View Related
Sep 10, 2011
Is there a way to create a fixed size selection rectangle that I can use whenever I want to take a selection from a larger image? Currently, I'm am doing this by trial and error and it's not fun.
View 2 Replies
View Related
Apr 15, 2012
Within gimp, I selected a portion of one image, copied it, and pasted it on another image. Now I want to take the pasted selection and increase/decrease its size. What tool does this? 'Grow' and 'Scale Image' doesn't work.
View 1 Replies
View Related
