VideoStudio :: Reducing VIDEO File Size?
Dec 7, 2010
I made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
View 7 Replies
ADVERTISEMENT
Nov 6, 2013
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
View 3 Replies
View Related
Sep 17, 2013
Is there a method or a filter I can use to reduce the speckled effect of video amplifier noise?
View 2 Replies
View Related
Apr 15, 2008
is there a function in photoshop cs3 that will reduce the file size of a photo without affecting the physical size of it, i know macromedia fireworks can but thats no help to me unfortunately...
View 1 Replies
View Related
Jun 25, 2011
how to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Sep 12, 2013
I designed artwork for a large banner (84" x 32") so my AI artboard is that large. As you can imagine, with all the text and graphics I used, this file size is 22.8 MB. I need to email this art to the printer, but the file size is too large to email. How do i go about reducing the file size in AI so it still maintains large format print resolution? Will saving to a PDF lose the print quality?
View 7 Replies
View Related
Apr 8, 2008
Working in Adobe Photoshop CS. I have a tif file that is 36"x36" at 150dpi.
Flattened image; Grayscale mode. File size is 28.499MB. Is there any way
to reduce the file size other than change it to a jpeg? I need to email it
somewhere and they can't accept files over 20MB.
View 5 Replies
View Related
Jan 9, 2012
I have several pictures that are over 1 mb in size. I need to get them down to under 100 kb for my wall charts to print.How to do?
View 1 Replies
View Related
Dec 28, 2012
I have a 3D model that consists of a large number of "small" objects that i created earlier in separate files. The problem is that now my model is 50Mb and I am having trouble working with it. Is there a way of reducing size, or is there any other solution that would not change the geometry of my model?
Working with Intel Quad Core, 6Gb of ram and ATI Radeon HD3800.
View 3 Replies
View Related
Jan 4, 2013
i have produced a drawing and have copped and pasted quite a few photograhs on it showing details etc. however bnow my drawing has a very large file size. i have purged drawing, it is the photographs
View 3 Replies
View Related
Dec 13, 2012
I had a question on reducing the image size after editing in Photoshop.
After doing my changes in Lightroom, I typically make edits in Photoshop and then do some final touchups back in Lightroom. The RAW file from my camera is approximately 24 MB. After making my edits in PS, the TIFF file it produces (with all layers flattened) is in the 60 MB range.
My question is, if before sending in back to LR, I change the image size in PS say to 12 MB or so, am I basically creating a lossy jpg file? Meaning -- by reducing that TIFF file size down to 12 MB am I throwing out important information such that when I go back to LR I am losing information and won't have as much control as the 60MB TIFF file?
keep upwards of 80MB per image (due to the RAW + edited file). I don't want to lose imporant information so I will if I have to, but would prefer not.
View 1 Replies
View Related
Apr 14, 2009
I have a number of files which were prepared in Corel Draw which I would like to post online. The designer has supplied the PDF versions of these files, however, the files sizes are too large for web usage. A 8 pg document is 5Mb. I have tried reducing the sizes by compressing in Acrobat; importing the PDFs into Corel Draw and re-creating PDF files with reduced resolution; recreating the PDF without the bitmap images (there are about 10 images)..yet the file size of the PDF does not change significantly.
What else can I do to reduce the file size of the generated PDF files? The files are newsletters, so most of the content is text and a few shapes and lines.
View 6 Replies
View Related
Nov 9, 2012
I have just produced .dxf files from .shp files using Surpac. The problem is that the final .dxf's are that huge in terms of memory that is really dificult to open the .dxf with any version of AutoCAD
View 2 Replies
View Related
Aug 27, 2013
I am having a problem when exporting surface data into an .xml format using AutoCAD Civil 3D 2012. I am using LIDAR information to create a surface over an area of approximately 3 hectares in order to undertake future flood modelling. When I have created my surface in Civil 3D the overall file size is around 5MB, however when the surface exported to a .xml format the file is approximately 860MB. I have tried to create a new surface from contour information to decrease overall fle size but with no avail. Any recommendations to decrease the .xml file size without having excessive loss of accuracy for my modelling.
Lidar information that I am using to create surface can be found at URL.....
View 4 Replies
View Related
Mar 24, 2003
I am using photoshop 7, I am trying to reduce jpg images around 1 mb sized at about 2400 x 1800. I am trying to reduce the image down to about 5 centimeters and retain the sharpness.
I have found that my images are blurring a fair bit.
View 7 Replies
View Related
May 13, 2012
My intention was to convert a 3DS-File into an IPN-File, to use it in Inventor.As I did not managed to do this in Inventor, I importet the 3DS-File in CATIA V5 and converted it into a CATIA-CatPart and from there in an IGES.Then I was able to open it in Inventor and made a IPN out of it.
The PROBLEM: The original 3DS-File had 700 kilobyte but the actual IPN 54 MegaByte !
View 9 Replies
View Related
Apr 4, 2013
We were sent some step files of valves from a company - what would be the best practice to make this into (clean up) a useful part to be used in our assemblies. Interested in converting it into a useful part but reduced in size. (Compared to other valves we use - this is easily 10 times the size).
View 7 Replies
View Related
Apr 6, 2012
I have two designs for labels that have to be approved by the government for type size regulations. The current size of the illustrator files are 133.3 MB and 24.7 MB I need to provide these at no larger than 450 kb AND the type must be readable and measurable for approval.
I have tried everything I can think of to provide the artwork small enough yet still retaining enough resolution to not make the type fuzzy and not able to be measured for size. I've tried making the files from within illustrator, I've tried taking everything into Photoshop to make the JPEGS with no luck. They want either a gif, jpeg or tiff no larger than 450 kb that is viewable at the print size of the label with no loss of resolution...
View 8 Replies
View Related
Oct 29, 2012
In vX1 I could save jpeg without substantially reducing file Mb size. In vX4, whenever I edit and save a jpeg file (using save & save as), it results in a reduced number of Mb's. Options in the 'save as' dialog are set at best. It would appear that PSP X4 is automatically optimising. Is there any way that the original file size can be retained on saving after editing?
View 7 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Jun 21, 2013
I'm new to Corel. I have done some video editing. I have used Premiere in the past. I am importing dv video and the size captured is 740 x 480 from my Sony DV camera. It is an older camera. First Digital Hi-8. When I produce a video and play it in a player on the pc it is displayed in whatever size I want, including full screen. When I burn a dvd it only plays in a small window, I'm assuming 740 x 480. Is there a way to produce a video that will take up the entire tv screen. I'm only concerned with 4:3 ration, not widescreen at this time.
View 8 Replies
View Related
Jan 21, 2012
With the project settings at 16:9 it is possible to insert photos of a different ratio and the customize pan and zoom will allow them to the cropped to 16:9.
I thought I had done the same thing with 4:3 video clips in a 16:9 project by using Video Pan & Zoom in the filters [and I tried the other crop filter as well], but maybe not, as when I tried to do this with a 1280x1040 AVI clip from a time lapse camera the only cropping box it would offer was in the same ratio as the clip. I also tried it with the same clip converted to mpeg, with the same result.
crop a video clip to 16:9 in a 16:9 project in VS14?
View 10 Replies
View Related
Feb 9, 2013
I did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.
I got two error messages:
"The miminum size be reducing the bit rates still cannot fit once disc."
"Convert step got some problems."
What are the minimum requirements for fitting a video file to a DVD?
View 2 Replies
View Related
Jul 13, 2012
I don't understand why a video increased in size so that I cannot burn a DVD. The video was originally a 1 hour 26 min TV show on a VHS tape. I used a VCR/DVD combo unit to create a DVD, and created a MPEG2 on a hard drive using a conversion program. The size of the DVD is 2.89GB and the size of the MPEG2 is 2.85GB.
I imported the MPEG2 into a library folder in VS Pro X5, and dragged it into the video track. A right click to look at Properties in both the library and video track shows a size of 2,998,518KB, which is 2.86GB. I went straight to Share without adding titles or anything to the video. I selected Create a Disc and took the basic defaults for the menu in Share and didn't edit any of the menu text. When I get to the Output section, the Required/Available Disc Space is in red and has the following information:
5.08GB/4.38GB
(5.45GB)/(4.71GB)
Where did I get the 2.23GB in video growth? I saw a post from Jan 2012 that mentioned data rates for a 60 min. and 120 min. DVD. My Properties shows a data rate of Variable bit rate (Max 6124kbps). Could this be a reason for the growth? If so, how do I change it?
View 8 Replies
View Related
Dec 6, 2012
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
View 3 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 23, 2013
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Oct 21, 2007
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies
View Related
