VideoStudio :: Batch Convert Decrease Video Screen Size?

Mar 31, 2012

I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)

The files and settings are the same. The only difference is using batch convert or not.

This happens to Video Studio Pro X3 and X5.

View 12 Replies


ADVERTISEMENT

VideoStudio :: Why Does Frame Rate And Video Quality Decrease

Dec 19, 2010

I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format

i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?

i selected the "same as project settings" option when creating the file. is there some other option i should choose ?

or is this because i'm using a trial version ?

i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.

View 1 Replies View Related

VideoStudio :: Gradually Increase / Decrease Speed Of Video Clip?

Dec 11, 2011

I know how to change the playback speed of a video clip in my project, but is there a way to have it smoothly transition? For instance, can I have it go from 1x to 3x over a period of 2 seconds or must I jump directly from 1x to 3x (or manually break the files into dozens of super small chunks and manually increase each one... which will still not look smooth)?

View 2 Replies View Related

VideoStudio :: Low Quality Output With Batch Convert

Sep 29, 2010

I am using VS Pro X2. There is a problem with batch conversion. When I export the videos individually using "share", I get a good quality output, but when I export the same video using "batch convert", the quality degrades, for example the title gets blurry. I am using the exact same output setting in both situations:

MPEG-4 Files
24 bits, 640 x 480, 30 fps
Frame-based
MPEG-4 SP Video: 2000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps

View 5 Replies View Related

Lightroom :: Decrease File Size To More Than Half Of Original Size

Dec 6, 2013

My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?

View 7 Replies View Related

VideoStudio :: Batch Convert Movie In MPEG4 To MPEG2

Dec 21, 2010

I recently tried to convert a 76 minute movie in mpeg 4 to mpeg 2 using the batch convert function. I first went into options and set the bit rate to 6100 kbps and the audio to Dolby 2 ch. stereo, with the bit rate set to constant. After the conversion had taken place, I found the results were excellent, except that only 38 minutes were converted. I tried it again, but still only 38 minutes and then it it finishes. Why won't it convert the full 76 minutes? The destination folder is on my "D" drive which is 1 TB, so there is lots of room.

View 3 Replies View Related

VideoStudio :: Batch Convert With FX / Export Multiple Clips From Timeline

Aug 29, 2012

My question is, does Videostudio X5 have the capabilities to either:

A) Batch convert while using one or more of the FX
B) Export multiple clips in one go from the timeline?

I have 120+ short video clips that I need to crop to a different size. I've figured out how to crop them to the size I need by using the "Croping" function in the FX. There seems to be no way however to apply this to all the clips at once in the Batch Convert.

The only way I can do it is to import all of the individual clips to the timeline and then export them individually...one at a time....taking a lot of my time. I notice they all retain their same file names in the timeline. Isn't there a way I can select all of them at once and export them with their individual file names all in one go (with any FX I've added)?

View 2 Replies View Related

VideoStudio :: X5 / Batch Convert Can't Deal With Long Path Names

Oct 5, 2012

the batch conversion tool can't handle long file names as generated by the Windows Live Photo Gallery import tool. I was shocked (dismayed?) to see that my brand new X5 doesn't import DV as nicely as this free MS tool (as an aside). Here is an example filename: "Tape05 2001-01-02 14.05.33.avi". It stumbles on the first '.' it finds. Luckily it does not overwrite files that end up having the same name because of this truncation but still. Come on now. Path manipulation is junior engineer programming 101.

The batch convert also does not remember the target directory last used. At least default it to the source directory, right?Unlikely to be fixed, I know, but maybe it'll go on the list for X6.

View 1 Replies View Related

VideoStudio :: Why Can't Batch Edit Photos And Video For Auto Filters

Aug 25, 2012

I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.

View 1 Replies View Related

VideoStudio :: Convert Video To 4:3

Mar 3, 2013

Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?

View 3 Replies View Related

VideoStudio :: X4 Video Capture - No Display On Screen?

Mar 21, 2011

As I launch a videocapture on videostudio pro X4, I don't get any video display on my screen, only hearing the sound. Afterwards, the generate file is OK with picture and sound.

View 5 Replies View Related

VideoStudio :: Exported Video Not Full Screen

Apr 15, 2013

My exported videos don't seem to be full screen. My source data are jpg pictures in 4272x2848 resolution (Aspect Ratio of 3:2) turned into time lapse videos. I have tried exporting in MPEG-4 and WMV Screen capture 1920x1080 (1.777:1) and the resulting videos have black bars on the sides because of the different aspect ratio. I would ideally like to have an imported video file that is the same aspect ratio as the source pictures, something like a 1620x1080 (3:2). Can I pick a custom resolution for exporting? Is there a way I can crop the black bars out afterwards? Can I apply a cropping filter to the current project before exporting?

The "Enable Widescreen" setting had no effect on the videos, they came out identical.

View 3 Replies View Related

VideoStudio :: Convert Recorded MP4 Video Files To DVD

Dec 14, 2010

I would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?

View 6 Replies View Related

VideoStudio :: Convert Video Clip Frames To Images?

May 24, 2013

can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?

View 12 Replies View Related

VideoStudio :: Edit And Convert All Video Footage Into Movies

Dec 19, 2012

I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.

Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.

As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.

View 2 Replies View Related

VideoStudio :: Convert Video To JPG Format Using Photo Impact 11?

Jan 16, 2012

Is there any way that i can convert a video into the jpg format using Video Studio 10+ or Photo Impact 11 ?

( that is apart from the " save as image " in Studio) Like a batch convert job.

Or perhaps a freebie converter out there.

View 2 Replies View Related

VideoStudio :: Easy Cap Device - Convert Video Footage From VHS To AVI

Jan 30, 2011

Trying to convert video footage on VHS video to AVI files which I can burn to DVD disc. I bought EasyCap and installed it along with Ulead Video Studio. The program seems to be running OK, the device appears to have been installed OK. I connected the VHS recorder to the Easy Cap device with the Scart to RCS lead supplied with it. When I go to capture video, nothing happens, apart from the clock starting. The screen remains blank and no video is recorded.

View 1 Replies View Related

VideoStudio :: Screen Shot Video - Blurry When Edit Clips Together

Jun 27, 2012

I am making a screen shot video for my website. I created 6 individual short videos that look great. When you play them individually, they look great. These are "how to use the website" short videos that do have typing on the screen. The typed words are perfectly clear as individual videos.

As soon as i merge the clips into 1 video, the typed words and the whole video gets fuzzy. I have re-shot new videos and I get the same result.

I have searched all over the internet for the last couple of weeks researching a solution. I've enlisted smart proxy and gone through just about every setting in "preferences" painstakingly slow and I still can't figure it out.

All of my information for my computer should be correct, but wasn't sure if i got the video card correct.

View 7 Replies View Related

Photoshop :: How To Decrease Size Of Pictures

Oct 11, 2013

How do I decrease the size of my pics, they're all around 7MB or 5MB, I need to get them to 2MB

View 1 Replies View Related

AutoCad 2D :: How To Decrease PDF Size For Printing

Dec 23, 2012

I want to print pdf. Actual pdf size is 2.27mb. But when I send it on plotter for plot it , pdf file size increase up to 46.9MB. I wait more than 60 min for plot. But nothing came out.

Plotter display windows shown as processing print.

How I print it fast or how I decrease pdf size for printing.

View 7 Replies View Related

VideoStudio :: Cannot Initialize Application / Screen Resolution Is Too Small To Play Video

Dec 1, 2010

I Just bought a new HP laptop and it came with Corel VideoStudio Pro X3 pre installed. When I go to open the program I get the error message 'Cannot initialize application. The screen resolution is too small to play the video. The screen resolution must be set to at least 1024 x 768". Well the screen res is on 1600 x 900, so i thought i would have that covered. I tried changing the screen res to 1024x768 and get the same message.

View 8 Replies View Related

VideoStudio :: Window Bigger Than Screen - Adding Text To Low Quality Video

Jul 18, 2013

I'm using Corel videostudio X6 and I have 2 problems.

1. when i go in to track/customize motion mode, the window is bigger than the screen so i can't use this option (i'm using lap top wide screen). like in here: [URL] ....

2. when i'm adding a text to low quality video the text doesn't look well and i wonder how can i maintain the quality of the text?

View 1 Replies View Related

VideoStudio :: Video File Size

Nov 6, 2013

I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.

I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.

View 3 Replies View Related

VideoStudio :: Change Video Size

Jun 21, 2013

I'm new to Corel. I have done some video editing. I have used Premiere in the past. I am importing dv video and the size captured is 740 x 480 from my Sony DV camera. It is an older camera. First Digital Hi-8. When I produce a video and play it in a player on the pc it is displayed in whatever size I want, including full screen. When I burn a dvd it only plays in a small window, I'm assuming 740 x 480. Is there a way to produce a video that will take up the entire tv screen. I'm only concerned with 4:3 ration, not widescreen at this time.

View 8 Replies View Related

VideoStudio :: Cropping Odd Size Video To 16:9?

Jan 21, 2012

With the project settings at 16:9 it is possible to insert photos of a different ratio and the customize pan and zoom will allow them to the cropped to 16:9.

I thought I had done the same thing with 4:3 video clips in a 16:9 project by using Video Pan & Zoom in the filters [and I tried the other crop filter as well], but maybe not, as when I tried to do this with a 1280x1040 AVI clip from a time lapse camera the only cropping box it would offer was in the same ratio as the clip. I also tried it with the same clip converted to mpeg, with the same result.

crop a video clip to 16:9 in a 16:9 project in VS14?

View 10 Replies View Related

VideoStudio :: Fit Video To DVD - Size Limit?

Feb 9, 2013

I did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.

I got two error messages:

"The miminum size be reducing the bit rates still cannot fit once disc."

"Convert step got some problems."

What are the minimum requirements for fitting a video file to a DVD?

View 2 Replies View Related

VideoStudio :: Why Video Size Increases

Jul 13, 2012

I don't understand why a video increased in size so that I cannot burn a DVD. The video was originally a 1 hour 26 min TV show on a VHS tape. I used a VCR/DVD combo unit to create a DVD, and created a MPEG2 on a hard drive using a conversion program. The size of the DVD is 2.89GB and the size of the MPEG2 is 2.85GB.

I imported the MPEG2 into a library folder in VS Pro X5, and dragged it into the video track. A right click to look at Properties in both the library and video track shows a size of 2,998,518KB, which is 2.86GB. I went straight to Share without adding titles or anything to the video. I selected Create a Disc and took the basic defaults for the menu in Share and didn't edit any of the menu text. When I get to the Output section, the Required/Available Disc Space is in red and has the following information:

5.08GB/4.38GB
(5.45GB)/(4.71GB)

Where did I get the 2.23GB in video growth? I saw a post from Jan 2012 that mentioned data rates for a 60 min. and 120 min. DVD. My Properties shows a data rate of Variable bit rate (Max 6124kbps). Could this be a reason for the growth? If so, how do I change it?

View 8 Replies View Related

AutoCAD 2010 :: Cannot Decrease Size Of Drawing File

Mar 7, 2013

We have a drawing that has been exploded purged, overkilled, audited and we still cannot decrease the size of it.  Theres no blocks, theres no 3d, its a very simple drawing but I feear its corrupted.  I've tried copy/blocking the information out of it but that just makes it crash. I cant attach it its too big! (16 meg)

View 9 Replies View Related

Photoshop :: Decrease Canvas Size By Removing The Middle?

Feb 28, 2009

Is it possible to reduce canvas size by removing a set width or height to be removed from the center of the image? Here is an example situation. I have a graphic that I use for rounded corner effects in a website. For border and shading reasons, I am using images that span the whole width of the element, not using individual corner images. So, my image would look something like this:

:.__________.: (bottom.gif, let's call it)

I've had to create a number of these images in varying widths, based on whatever element it is to accent. What I'd like to do is have my base PSD image be, say, 1000 pixels wide, and when I need to create a graphic that is 200px wide, I would just remove 800px of width from canvas, but from the center, and have the sides collapse in together.

View 2 Replies View Related

GIMP :: How To Take Pasted Selection And Increase / Decrease Its Size

Apr 15, 2012

Within gimp, I selected a portion of one image, copied it, and pasted it on another image. Now I want to take the pasted selection and increase/decrease its size. What tool does this? 'Grow' and 'Scale Image' doesn't work.

View 1 Replies View Related

VideoStudio :: How To Trim / Crop A Video To Particular Size

Dec 6, 2012

I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).

I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved