VideoStudio :: Edit And Convert All Video Footage Into Movies
Dec 19, 2012
I have been using VS11But, I have just bought a new camera, a Panasonic HC V500. A small section of the info on the camera are the following lines:- 2D-to-3D Conversion.The camera processing engine automatically converts your 2D footage to 3D without the need for the optional 3D lens, to then be able to view on your 3D TV for an enhanced viewing experience.
Progressive Video Format for Smooth Action.The Full HD format employed in this model uses 1080/50p (AVCHD Progressive compliant) imaging. The Progressive format carries roughly double the image information of a 1080i interlace signal, minimising flickering and after-images.
As I edit and convert all my video footage into movies, will the latest VS programme retain the 3D conversion ability/facility, if so, what is the latest (or best) VS edition to purchase.
View 2 Replies
ADVERTISEMENT
Jan 30, 2011
Trying to convert video footage on VHS video to AVI files which I can burn to DVD disc. I bought EasyCap and installed it along with Ulead Video Studio. The program seems to be running OK, the device appears to have been installed OK. I connected the VHS recorder to the Easy Cap device with the Scart to RCS lead supplied with it. When I go to capture video, nothing happens, apart from the clock starting. The screen remains blank and no video is recorded.
View 1 Replies
View Related
Nov 27, 2011
So to share an iphone 4s video, what are the best output settings, to retain the .mov settings, so that there is the least amount of re-encoding, which presumably will be the fastest?
View 1 Replies
View Related
Aug 26, 2013
I have VideoStudio Pro X2 and my operating system is Windows 7 Home Premium. I'm trying to put together a film, including some sequences which have been filmed on an IPad (I think) for which the aspect ratio is a thin vertical rectangle. I would like to change the shape to a horizontal rectangle by removing segments at the top and bottom.
View 10 Replies
View Related
Feb 28, 2012
I've been using Corel Video Studio X4 to edit the footage from my Muvi HD camera which is usually mounted on my bike frame or cycle helmet.
If I upgrade to X4 Ultimate it comes bundled with some software that is supposed to stabilise the recorded video. (proDAD Mercalli SE)
Any experience of this software plugin, is it worth upgrading for this component, or any alternatives to steady video recordings?
View 10 Replies
View Related
Apr 20, 2013
I am using VSX5 and after rendering a project of video, where I have added transitions and titles, the video image is not as clear as it was before I rendered.
I have captured the footage from a mini dv camera using firewire, or, someone else has captured the video footage on a dvd using a dvd burner and given me the dvd to import into VSX5. Sometimes VSX5 will not read that dvd for import, so I have used freemake video converter, and converted the dvd into an mpeg file and put it in a folder on my computer where VSX5 "grabs" it. During the edit phase, the video is clear, after render, it loses some of it's clarity and is blurry.
This has not always been the case. The only thing that has changed with VSX5 is I installed sp2.
View 14 Replies
View Related
Mar 3, 2013
Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies
View Related
Aug 28, 2011
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies
View Related
Dec 13, 2010
I would like to know about editing of .avi video files with Corel Video studio Pro. What i am trying to do is three things 1, remove existing text in the video while keeping the effects. 2, Add my own text to where the original text is now. 3, ad my own clips to the video. The .avi file that I am attempting to edit is actually a video template and is designed to be edited. I can't seem to remove the text in the video. There are two files : ".aep" and ".prpro" Would these file have any thing to do with the editing of the video files?
View 5 Replies
View Related
Dec 14, 2010
I would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?
View 6 Replies
View Related
Jun 6, 2012
In CS5 I would always save my in-progress .gifs as Quicktime Movies. Since upgrading, I have not been able to open any of these QuickTime files, and I also cannot open .mp4 files that I created in Photoshop CS6. I don't have any plugins installed, if I should.
View 6 Replies
View Related
Dec 26, 2012
Using Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
View 7 Replies
View Related
Jun 16, 2012
I am new to VSP X5. I want to edit a music video that I recorded live. The live recording of the music was fine but I need to cut and paste new video clips in certain part of the songs in the video timeline. I split the audio from the video.
I am having a hard time trying to sync the audio because every time I cut the video clip, the video keeps snapping back, making audio out of sync. Also, when adding transitions, video clips automatic shrink. I tried enable ripple, video still snap back. Is there a setting in the preference?
View 3 Replies
View Related
Oct 16, 2011
I have VideoStudio XS4 Pro and it freezes when I try to edit a MPG4 video. The source video is from the Flip video player. I have been able to edit these without any problems before. This time when I put the video in the edit window I can start to play it, but then the UI stops working. It beeps when I try to press any button.
I'm using Windows 7. (see my machine profile) I have applied latest updates.
Project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
At this point the software is unusable.
View 5 Replies
View Related
Oct 16, 2011
Using VS X2, There is only black screen when editing sample file or any other video. All load correctly and can be viewed as individual clips but only black screen when playing "project" . Have re-installed program (repair) - no change.
View 6 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Jan 16, 2012
Is there any way that i can convert a video into the jpg format using Video Studio 10+ or Photo Impact 11 ?
( that is apart from the " save as image " in Studio) Like a batch convert job.
Or perhaps a freebie converter out there.
View 2 Replies
View Related
Oct 18, 2012
Since there's no built-in VS5 provision for audio editing (specifically a sound equalizer), what's the easiest way to edit the audio portion of the video? Sony Movie Studio 12 Platinum has built-in Sound Force and the capability of using Audacity as a plug-in.
I have at least 100 3-4 minute clips that require audio EQ.
View 12 Replies
View Related
Jun 24, 2012
I’ve been using very happily been using x2 for a number of years to make a lot of movies from my standard definition camera, I’ve loved the programme, and it has generally been able to do everything I wanted, and made for an enjoyable editing process. However, the camera has finally given up and I’m now going down the HD route, and the old x2 version just keeps crashing with any new clips. So I have recently downloaded the trial version of x5 (5 days of trial left), with the intention of trying it out and then purchasing it.
Unfortunately however I have found it to be jerky and jumpy when editing clips together, particularly when using the overlay tracks, the more overlays the worse it gets. This happens when I want to watch the edit, and while the sound runs ok the video just freezes on a frame then jumps ahead a few seconds and freezes etc etc. Impossible to watch and edit to really.
I am using the smart proxy to get the files to a manageable size, and I can see the separate proxy files in explorer. Smart proxy enabled. I have all the acceleration on that can go on (the ”Enable Hardware Encoder Acceleration” is greyed out so I can’t tick it). When I share/render the movie it comes out just fine, so it’s only with the editing process that is jumpy. I have really enjoyed x2, and could get good results really quickly, and I enjoyed the editing interface and process with Corel VS, but am now thinking I might need to change to a different video editing programme.
Computer- HP Elitebook 8560w
Everything is just running off the laptop’s hard drive. I’ve installed The CVS x5 Service Pack 1
The project has only two clips – the first from a canon d550 as below
640x480 MOV
24 bits, 1848 frames
25.000 fps
73.92 secs
And the other from the net as below
MPEG-4 file
2890 KB
H 264 High Profile Video
989 frames
24 bits 640x480 4:3
30 fps
605 Kbps data rate
Project Properties
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Upper Field First
(DVD-PAL), 4:3
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
View 2 Replies
View Related
Aug 8, 2011
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
View 3 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Jun 27, 2012
I am making a screen shot video for my website. I created 6 individual short videos that look great. When you play them individually, they look great. These are "how to use the website" short videos that do have typing on the screen. The typed words are perfectly clear as individual videos.
As soon as i merge the clips into 1 video, the typed words and the whole video gets fuzzy. I have re-shot new videos and I get the same result.
I have searched all over the internet for the last couple of weeks researching a solution. I've enlisted smart proxy and gone through just about every setting in "preferences" painstakingly slow and I still can't figure it out.
All of my information for my computer should be correct, but wasn't sure if i got the video card correct.
View 7 Replies
View Related
Aug 25, 2012
I would like to take my many photos and videos and be able to batch edit a folder's worth at a time after they have been added to my timeline. I have several that have the same lighting problems and that would save me allot of time.
View 1 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Dec 20, 2010
I recently purchased the VX3/PSX3 bundle. So far we love the flexibility and ease of creating a project. We do a lot of transferring, such as 8mm and VHS for family and friends. Our most recent project included five 20 minute reels of 8mm film. The finished project with menus and credits was just about 1 hour 58 minutes with a size of 6.6GB.
We have a a Blu-Ray burner as well as a DL DVD burner so that size should be fine since we were going to just make a DL DVD. I then went to the SHARE tab and selected the "Create a movie" link. I chose the mpg option just out of familiarity. All went well until I noticed that it broke my project into 2 seperate movies (movie.mpg and movie001.mpg). The first was a bit larger than the second, but almost equal in time. I thought maybe I did something wrong and reran it. The second try yielded basically the same result...two movie files, but this time the second was only 9 minutes long while the first was 1 hour 48 mins. I do not want the extra links on the DVD Menu. The cousin that this is going to is NOT very electronics savvy and the extra buttons on the menu may cause a complete mental breakdown. How I can keep this 6.6GB project as one complete file for DVD authoring? I can forward along file info if need be when I get home.
View 14 Replies
View Related
Aug 24, 2012
I want to try a newer version of VS with a Canopus capture device. I want to convert some old VHS movies to DVD. Can this be accomplished with any of the newer VS versions, 11 up to 15? Also, will they work with Vista 32 bit?
View 4 Replies
View Related
Dec 9, 2011
I recently purchased VideoStudio Pro X4. I have been making movies just fine, but now I am wanting to try some new things such as effects. Here are some things I would like to try, but I am not sure if VideoStudio has this capability:
1. Add explosions to movies.
2. Also other effects like lightning coming from fingertips.
3. I have seen in other video clips where people have added a mouth to various inanimate objects such as a wall or fruit or whatever. The object would remain still while the mouth spoke. I am not sure if this is clear or not.
I noticed that some have used Adobe After Effects. Is this what is needed? It seems kind of expensive.
View 1 Replies
View Related
Jan 25, 2011
I have a created a video using my Sony XE105 handycam in HD and edited it successfully using X2.
I can then export it to WMV format and view the file in superb quality in windows media player. However, when I try to export into FLV format, I get the message about converting and it sits at 0%. I have left it for over a half hour without any movement before deeming it as having "hung" and trying again.
I'd really like to export movies in FLV format rather than WMV?
View 2 Replies
View Related
Feb 13, 2012
I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies
View Related
Mar 16, 2012
I have VisualStudio Pro X5.I would like to create a DVD that will have 3 movies (Titles). I would like to a have Play All button on the menu page so that when selected the 3 movies will play in sequence without returning to the menu after playing a movie. In addition I would also be able to select each each movie individually from the menu. Control would return to the menu after playing the movie.
View 5 Replies
View Related
Dec 17, 2013
I have a bundle of .mpg movies with unwanted sound included. Can I remove it?
Background: Took a bunch of ancient 8mm movies to a store and had them put on a CD. They came back in sets of .bup, .ifo, and .vob files. VideoStudio Pro X6 inducted them as .mpg files. VS was recently bought in a box; allowed update after installation. How to check the version.
View 1 Replies
View Related
