VideoStudio :: Screen Shot Video - Blurry When Edit Clips Together
Jun 27, 2012
I am making a screen shot video for my website. I created 6 individual short videos that look great. When you play them individually, they look great. These are "how to use the website" short videos that do have typing on the screen. The typed words are perfectly clear as individual videos.
As soon as i merge the clips into 1 video, the typed words and the whole video gets fuzzy. I have re-shot new videos and I get the same result.
I have searched all over the internet for the last couple of weeks researching a solution. I've enlisted smart proxy and gone through just about every setting in "preferences" painstakingly slow and I still can't figure it out.
All of my information for my computer should be correct, but wasn't sure if i got the video card correct.
View 7 Replies
ADVERTISEMENT
Aug 28, 2011
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies
View Related
Jun 15, 2010
Will I have problems editing video if some of the video is shot at 30 fps and action shots are recorded at 60fps? Do I need to import the video shot at 60 fps in a separate folder and or keep them separate from the 30 fps segments for editing purposes? How do you get the final project properties to match the inputed video if they are different? I am planning on shooting most of the video at 30 fps but would like the action shots at a higher frame rate for slow motion etc. How is this accomplished, or is it no big deal? I want to know before I shoot all the video so I don't have a problem later.
View 3 Replies
View Related
Aug 26, 2012
Taken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies
View Related
Jan 17, 2012
I want to use Video Studio X4 mostly for keeping track of all my video clips. So I want to import a lot of short clips into Video Studio, view them, and rename the ones that I want to keep (with a better name than the one the camera gives), and I want to delete (from my hard drive) the clips that I do not need.
1. How do I delete a clip in Video Studio X4 (not just the thumbnail)?
2. How to I rename a video clip that I am watching?
View 1 Replies
View Related
Dec 7, 2012
I just started using videostudio prox5 and Im having a hard time figuring out how to do this. Basically I have dvds of football games for minor league football, how do I go about using prox5 to extract certain parts from the dvd that I have? I tried importing from media from the dvd drive and it imports the video but how do I go about extracting parts of the video and save it to my computer so I can go back and create a highlight video of all the extracted clips?
View 1 Replies
View Related
Nov 3, 2013
First time creating a project and capturing digital (.mts) clips from digital media. I used to have a MiniDV camera which I found easy to 'capture' from.I recorded to SDHC memory card which I then copied (all folders and files) to a hard drive.I am using VS X6.
Method I used -Click on CAPTURE > IMPORT FROM DIGITAL MEDIA / Navigate to the folder where all the digital video clips are (PRIVATE/AVCHD/BDMV/STREAMClick START It takes a very long time for all video clips to be 'read' and 'thumbnails' displayed.
Now comes the problem.I want to select the FIRST 100 clips.I note that to select as clip to import I need to click the top left corner of a clip (and a tick appears) BUT I don't want to have to click on 900 thumbnails.I tried clicking on the first thumbnail then holding down the SHIFT key then clicking on the last thumbnail - didn't work.Tried the same holding down the CTRL key - didn't work.
View 12 Replies
View Related
Sep 3, 2012
I have installed Videosudio Pro X5 yesterday and I've encountered a really strange problem.
When I select the movie itself and view it in the preview window it looks fine.
However if I select any individual clip in the library or timeline the preview plays through at high speed. It will play through a 40 second video in less then 2 seconds.
Here's where it gets really weird. If I go into options and change the volume from 100 to 101 it will play at normal speed.It's annoying have to do this everytime I want to play a clip.
View 4 Replies
View Related
Nov 26, 2013
What are the steps to apply filters to all my video clips in Corel Videostudio? I am able to drop each each filter to each of the clip. But when I try - Select all clips - Drop a filter to the selections, it does not work as expected. Instead the filter gets applied only to one clip.
Is there any other way to achieve what I am doing - Automatically fix exposure and colour levels to all clips?
View 2 Replies
View Related
Jul 24, 2011
I'm trying to integrate 16:9 HD video clips into a 4:3 project (or vica versa). Obviously it will take cropping the edges but how? VS does not appear to be up to the task that I can figure. Maybe a third party utility?
View 1 Replies
View Related
Feb 1, 2011
In order to add mpeg video files to the library, I create in the library a new video folder for the current project.During adding the files I get sometimes the message: "No storage to load BB!!"
View 14 Replies
View Related
Sep 1, 2012
I added in the VideoStudio one soundtrack and few video clips but the problem is that when I play project I can see only video clips without soundtrack or hear soundtrack without seeing video clips. What should I do to get soundtrack and video clips together played?
View 7 Replies
View Related
Jul 4, 2013
I just tried creating my first video using VideoStudio X6 ultimate. I have multiple video clips, a jpg, an audio and a couple of music tracks. I've created it without problems and it plays great in the program during preview. My problem was when I tried to burn it to a DVD+RW disc. When I play the disc in my player, each time a video clip ends, there is a split second pause before the next clip starts. It also appears this way during the preview in the DVD creating utility. I submitted a ticket to Corel Support, and they told me to install the SP1. But I had trouble installing that service pack, but looking at my version, I see that I have 16.1.0.45. So maybe I already had installed it?
View 9 Replies
View Related
Oct 15, 2010
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies
View Related
Jan 9, 2013
Check out the first 45 seconds of this video to get an idea of what I'm asking about:
I'd like to do as she did when listing off the items that will be needed. Rather than stringing video clips together of each item by itself, I want it to have the same look--to have each item appear one after the other. To me, it looks like each clip of each item was layered on top of the original video of the first pair of leggings.
View 7 Replies
View Related
Nov 20, 2012
I'm working on a project that pulls together many short clips from many much longer video files e.g. there might be less than a minute pulled from a 60 minute file then another then another etc. I found that my computer (which is reasonably beefy) was struggling to cope with the workload so I split the project into separate project files i.e. Part 1, Part 2 and Part 3. My thinking was that once I had done all the editing I could cut and paste all the clips into a single new project file before rendering the entire thing. But I can't work out how to do it! Sure, I can copy and past individual clips or even a sequence of clips but on pasting they lose all the editing I've done! I just end up with a uniform bunch of unedited clips!
I guess the alternative is to render each project file (1, 2 and 3) separately then pull the rendered videos together into Project 4. I can then render Project 4 to give me my final 'movie'. But surely that means as I've rendered everything twice I'm suffering a quality loss?
So the question is: is there any way of copying edited video clips from one project file into another project file AND retaining all the edits?
View 2 Replies
View Related
Oct 28, 2012
I am using VS5 for the first time by creating avi files in Proshow Producer and importing them into video studio to make a show with both video and still images. My question is; once clips are imported to the video track can they be moved left or right? The reason I ask is the videos made in Producer are not necessarily in the order of the finished show and I would like to move the clips around to make the flow of the show smoother. When I try to move the clips on the video track they won't move left or right but only up or down in the overlay track. When I move the clip where I want it and move it into the video track the clip snaps back into it's original position. Is moving the clips into the overlay track the only way I can put them where I want them or am I missing something?
View 9 Replies
View Related
Mar 29, 2013
I had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
View 2 Replies
View Related
Mar 20, 2011
Just got a new HD video camera, Sony HDR-CX550V. Recorded short video clips and imported these clips (format AVCHD) to my computer using VS Pro X3. The imported clips have small icons or symbols in the top left corner. What do these symbols represent ? Where can I find descriptions of these symbols ?
View 2 Replies
View Related
Feb 14, 2011
I have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies
View Related
Nov 30, 2011
I have just taken some short video clips and put them together in a 3min 40 second video. When I tried to save it to my desktop the rendering took a little over an hour. This is my first try so I am really a newbie Is it normal to take that long to render? I was planning on making 20 to 40 minute videos but at an hour for every 3 minutes it may not work.
View 3 Replies
View Related
Mar 27, 2012
I'm trying to produce a 5 minute sports highlight video. It will be a mix of clips shot on my HDC-SD10 camcorder and clips pulled from a 1.5 hour game video on DVD. I am running Corel VideoStudio Pro X4.
Immediate challenge is importing clips from the game video on DVD. I don't want to download the entire game from the DVD just to pull 5 five-second clips. Unfortunately, entire game is one "chapter" on the DVD, so I can't just import a particular chapter. I've looked through the Corel manual, but can't find anything. How can I pull short clips from one long file?
View 2 Replies
View Related
Oct 4, 2011
I want to create video clips on top of my bands music. I load the music track just fine. Now I have 10 or so video clips that need to be inserted in certain places on the timeline to be sync'd with the music. But everytime you bring a clip into the video row it automatically locks to the last clip entered. Why can't you place the clips of the artists playing, in the correct place in the timeline? Also isn't there a way to display the audio track as a waveform?
View 2 Replies
View Related
Sep 22, 2011
I am using VideoStudio v11. I have a long section of video which is of someone making a speech. I want to insert some cut-aways into the sequence, whilst obviously retaining the audio running sequence.
I have split the audio from the video track, but I can't seem to figure out how to remove a section of the video and replace it exactly with a cut-away section of video. I need to keep the video and audio in sync. Maybe I am going about it wrong and don't need to split the audio off - but then how would I insert just a clip of video without disturbing the audio.
View 1 Replies
View Related
Jun 9, 2013
I must have clicked a button in VideoStudio Pro 5 and suddenly I have dots all over my images and video clips. The video plays with audio and titles but no images!
View 1 Replies
View Related
Feb 17, 2012
Some of my music video clips cannot be loaded in VS4. There doesn't seem to be any rhyme or reason - some of these were converted to my own "5.1 mix" (6 channel audio) using another editor, others are 2 channel audio. They're all 29.97 fps. Bitrates and resolutions vary greatly. Clip lengths are anywhere from 2 minutes minimum to about 5 minutes max. All the files do play in Media Player and Nero, and they stream (without transcoding) to tv thru LG BD player. Other files created/edited exactly the same way can be loaded into VS4. After creation all were run through DIVX Plus Converter for upload to YouTube and I (like a dummy) accidentally deleted the wrong files after upload.
View 2 Replies
View Related
Jul 6, 2011
I'm using VS 11. Is there a way to insert gaps between clips on the main video track? I can do this when I move the clips to the overlay track, but I need the overlay track for actual overlays, so I don't want to do that for this project. I need gaps so I can put in narrative text between each clip.
Alternatively, is there a way to have multiple overlay tracks?
View 1 Replies
View Related
May 28, 2012
I'm creating video clips in Corel Video Studio X4 Ultimate (Education),for use in creating multimedia PDFs with Adobe Acrobat X Pro.
The formats Adobe Acrobat says is accepts include MPEG 4 / H.264,so in Corel Video Studio X4 I've tried selecting the following types of output file:
1) "MPEG4: iPhone H.264 (640 x 480)" My preferred resolution, but Adobe Acrobat won't accept it, apparently because it's "Sony PSP" (according to an analysis by MediaInfo), not supported by Flash, according to an advisor on the Adobe forums.
2) "MPEG4: iPod H.264" (320 x 240) This is accepted by Adobe Acrobat, even though it's also Sony PSP (according to MediaInfo). But this isn't enough resolution for my purposes.
3) "MPEG4: iPhone 4/iPad HD" This is also accepted by Adobe Acrobat, but the resolution is too high (1280x720) as the files are too large.
View 2 Replies
View Related
May 24, 2011
This is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
View 7 Replies
View Related
Jan 30, 2013
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies
View Related
Aug 2, 2011
I just started using the trail version of the VideoStudio Pro software today. I am trying to modify a .avi video file. The movie "clips" play fine, but whenever I play the project, there seems to be compression of the video or something- it the video just becomes unclear and fuzzy. It is not sharp. I'm not sure if it's because it's too big or if I have the wrong settings.
how to superimpose animated clips/gifs/images onto a video?
View 8 Replies
View Related
