I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 RepliesFirstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
Just upgraded to X6 last week to start to edit a short movie that I am working with my students. Since is our first short with a lot of takes (about 74 takes in 7 scenes) and we had a lot of problems shooting because take more time them we thought! Well, now I am editing it but I need to export the edited clips (takes) in the time line to add special effects in HitFilm, so theres a way to export all those clips as MP4 or any format in a batch?
View 5 Replies View RelatedWhat does this icon indicate? See the attachment.
View 2 Replies View RelatedI'm working on a lengthy video highlights project with many clips less than 5 seconds and want to know the easiest way to bulk move at least 10+ clips at a time on the timeline to either an earlier or later point than they're currently at. In essence, I'm hoping that I can "bulk" cut and paste all these clips together instead of doing it one clip at a time by either dragging each individual clip or cutting and pasting.
View 5 Replies View Relatedis it possible to show thumbnails of a clip in the timeline like this one?
View 2 Replies View RelatedI am using X6. When I tried to launch a music track from "Smartsound", (from the owned section) the "Add to Timeline" was greyed out.
I Split the Audio from the video and it landed in the VoiceOver track. Is it possible to make it land in one of the music tracks?
Is it possible to alter the volume across all the clips on the timeline without having to alter each clip separately?
I have recently upgraded from VS11 to Pro X3. However when attempting to play clips in timeline, X3 crashes.Playing 'project' works fine.
OS is Vista.
My question is, does Videostudio X5 have the capabilities to either:
A) Batch convert while using one or more of the FX
B) Export multiple clips in one go from the timeline?
I have 120+ short video clips that I need to crop to a different size. I've figured out how to crop them to the size I need by using the "Croping" function in the FX. There seems to be no way however to apply this to all the clips at once in the Batch Convert.
The only way I can do it is to import all of the individual clips to the timeline and then export them individually...one at a time....taking a lot of my time. I notice they all retain their same file names in the timeline. Isn't there a way I can select all of them at once and export them with their individual file names all in one go (with any FX I've added)?
How to identify clips in the media library that are inserted in the timeline. There is no "tick" mark to tell us
View 7 Replies View RelatedI'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies View RelatedNew PC (Dell) with Vista 32; re-installed first VS10+.
Because I have now Vista 32: I bought and installed a full VS12 (X2 PRO?).
Problem: when I go to the Share-step I can add clips to the project but I cannot see them in the right. So cannot add chapters or trim the clip in the share step. The buttons below the preview window stays inactive.
When I go further: I cannot see the preview of the video "Press 'play' button to start preview" stays on the screen.
When I go further till burning (DVD-folder), the program makes the folder.
I want to edit a clip by cutting out the lips from one clip and overlaying them onto another still clip . i am using vs pro 4
View 2 Replies View RelatedTaken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies View RelatedI want to use Video Studio X4 mostly for keeping track of all my video clips. So I want to import a lot of short clips into Video Studio, view them, and rename the ones that I want to keep (with a better name than the one the camera gives), and I want to delete (from my hard drive) the clips that I do not need.
1. How do I delete a clip in Video Studio X4 (not just the thumbnail)?
2. How to I rename a video clip that I am watching?
I just started using videostudio prox5 and Im having a hard time figuring out how to do this. Basically I have dvds of football games for minor league football, how do I go about using prox5 to extract certain parts from the dvd that I have? I tried importing from media from the dvd drive and it imports the video but how do I go about extracting parts of the video and save it to my computer so I can go back and create a highlight video of all the extracted clips?
View 1 Replies View RelatedFirst time creating a project and capturing digital (.mts) clips from digital media. I used to have a MiniDV camera which I found easy to 'capture' from.I recorded to SDHC memory card which I then copied (all folders and files) to a hard drive.I am using VS X6.
Method I used -Click on CAPTURE > IMPORT FROM DIGITAL MEDIA / Navigate to the folder where all the digital video clips are (PRIVATE/AVCHD/BDMV/STREAMClick START It takes a very long time for all video clips to be 'read' and 'thumbnails' displayed.
Now comes the problem.I want to select the FIRST 100 clips.I note that to select as clip to import I need to click the top left corner of a clip (and a tick appears) BUT I don't want to have to click on 900 thumbnails.I tried clicking on the first thumbnail then holding down the SHIFT key then clicking on the last thumbnail - didn't work.Tried the same holding down the CTRL key - didn't work.
I have installed Videosudio Pro X5 yesterday and I've encountered a really strange problem.
When I select the movie itself and view it in the preview window it looks fine.
However if I select any individual clip in the library or timeline the preview plays through at high speed. It will play through a 40 second video in less then 2 seconds.
Here's where it gets really weird. If I go into options and change the volume from 100 to 101 it will play at normal speed.It's annoying have to do this everytime I want to play a clip.
What are the steps to apply filters to all my video clips in Corel Videostudio? I am able to drop each each filter to each of the clip. But when I try - Select all clips - Drop a filter to the selections, it does not work as expected. Instead the filter gets applied only to one clip.
Is there any other way to achieve what I am doing - Automatically fix exposure and colour levels to all clips?
I'm trying to integrate 16:9 HD video clips into a 4:3 project (or vica versa). Obviously it will take cropping the edges but how? VS does not appear to be up to the task that I can figure. Maybe a third party utility?
View 1 Replies View RelatedIn order to add mpeg video files to the library, I create in the library a new video folder for the current project.During adding the files I get sometimes the message: "No storage to load BB!!"
View 14 Replies View RelatedI added in the VideoStudio one soundtrack and few video clips but the problem is that when I play project I can see only video clips without soundtrack or hear soundtrack without seeing video clips. What should I do to get soundtrack and video clips together played?
View 7 Replies View RelatedI just tried creating my first video using VideoStudio X6 ultimate. I have multiple video clips, a jpg, an audio and a couple of music tracks. I've created it without problems and it plays great in the program during preview. My problem was when I tried to burn it to a DVD+RW disc. When I play the disc in my player, each time a video clip ends, there is a split second pause before the next clip starts. It also appears this way during the preview in the DVD creating utility. I submitted a ticket to Corel Support, and they told me to install the SP1. But I had trouble installing that service pack, but looking at my version, I see that I have 16.1.0.45. So maybe I already had installed it?
View 9 Replies View RelatedI am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies View RelatedCheck out the first 45 seconds of this video to get an idea of what I'm asking about:
I'd like to do as she did when listing off the items that will be needed. Rather than stringing video clips together of each item by itself, I want it to have the same look--to have each item appear one after the other. To me, it looks like each clip of each item was layered on top of the original video of the first pair of leggings.
I'm working on a project that pulls together many short clips from many much longer video files e.g. there might be less than a minute pulled from a 60 minute file then another then another etc. I found that my computer (which is reasonably beefy) was struggling to cope with the workload so I split the project into separate project files i.e. Part 1, Part 2 and Part 3. My thinking was that once I had done all the editing I could cut and paste all the clips into a single new project file before rendering the entire thing. But I can't work out how to do it! Sure, I can copy and past individual clips or even a sequence of clips but on pasting they lose all the editing I've done! I just end up with a uniform bunch of unedited clips!
I guess the alternative is to render each project file (1, 2 and 3) separately then pull the rendered videos together into Project 4. I can then render Project 4 to give me my final 'movie'. But surely that means as I've rendered everything twice I'm suffering a quality loss?
So the question is: is there any way of copying edited video clips from one project file into another project file AND retaining all the edits?
I am using VS5 for the first time by creating avi files in Proshow Producer and importing them into video studio to make a show with both video and still images. My question is; once clips are imported to the video track can they be moved left or right? The reason I ask is the videos made in Producer are not necessarily in the order of the finished show and I would like to move the clips around to make the flow of the show smoother. When I try to move the clips on the video track they won't move left or right but only up or down in the overlay track. When I move the clip where I want it and move it into the video track the clip snaps back into it's original position. Is moving the clips into the overlay track the only way I can put them where I want them or am I missing something?
View 9 Replies View RelatedI had VisualStudio x5 working fine on my Windows 8 Pro machine. I've been using this for a few months without issue. I imported some video from my phone in .MOV format, and had the message that I needed install quicktime to work with this video. I did so, edited video, and posted it.
However when I then imported video from my Canon camcorder, AVCHD format, I received a crash dump in trying to play any of the clips. What's strange is that I was able to look at old sections of clips I'd saved and play them find. Only the newer clips were an issue. I suspected corrupt files, re-imported things and it didn't work. I even recorded new video and that didn't work. I was up to date on patches from Corel, according to the product.
I was in a bind, so I decided to upgrade to x6, even though none of the features were really important. I upgraded, imported the same videos I'd had issue with in x5 and they worked. Problem solved, or so I thought.
I had to run x5 to access some old clips to put together a short reel. I did that and things worked fine. I then went back to x6 and received crash dumps on all imported files, including the video I had just imported. I can still play the edited pieces of clips I separated out in x6, but I cannot play any full clips.
I've rebooted multiple times, removed quicktime, uninstalled and reinstalled x6, no go.
I'm currently working on a video that has alot of individual pictures etc in the timeline. I would like to delete a few of the pictures from the video. when I delete the pictures I get an opening in the video that I don't wish to have. How do I shift the entire video over to fill that gap? On the flip side of the coin. Is there a way to insert a clip into the timeline and shift everything down around the inserted clip?
View 3 Replies View RelatedJust got a new HD video camera, Sony HDR-CX550V. Recorded short video clips and imported these clips (format AVCHD) to my computer using VS Pro X3. The imported clips have small icons or symbols in the top left corner. What do these symbols represent ? Where can I find descriptions of these symbols ?
View 2 Replies View RelatedI have several movie clips I want to turn the volume down to the same level. I don´t want to do it one clip at a time. When I select multiple clips, the sound level bar turns gray and I can´t change the level.
View 3 Replies View Related