I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 RepliesCan I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies View RelatedIn the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View RelatedI am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
I've been using X5 to edit a project that has about 20 small clips in it. I've noted that (1st occurrence of this) moving from one clip to the next in the main project timeline, the sound in the next clip just vanishes. Selecting the affected clip individually and then playing confirmed its got sound there.
This was first seen after turning ripple editing on (the little padlock went from open to closed). But various measures did not remove the effect:
- turning ripple editing off
- delecting the affected clip - the next clip in turn was affected by this
- closing X5 without saving the project changes, then re-starting X5 and opening that project. At the same point in the timeline, sound went away.
Is there any known explanation for this, and how can I remove this effect?
I bought VideoStudio x5 about 3 weeks ago, there has been a bit of a learning curve but I am starting to get what I want. I still cant figure out one problem. I am screen capturing with another program because well videostudios screen capture doesn't work that well. My program produces AVI's and I bring them into video studio and piece them together. When I piece videos together, it skips for some reason a second or 2 into the second track. I have tried converting to mp4, hdv 720p - 30p (for PC), AVCHD (1820x720 60P), "Same as first video clip" and they all do the same thing. Here I have a youtube link to a video that I converted from AVI to mpeg and you can hear when I say "Naming Conventions" there is no problem [URL]
Here I have a youtube link to a video that I combined 2 seconds from a previous clip and when I say "Naming Conventions" you can hear the problem. [URL]
I have purchase VideoStudio Pro X4 and in the sound library there are only 2 sound clips to choose from!
View 4 Replies View RelatedWhen I split audio and then create the sound file, that file and the audio in project also lost.
I can add audio file normally but when I mix many clips, I just can hear sound whenever I choose the clip only. If I choose the whole project, the sound will be lost although the background sound still exist.
When I replace X5 by X4, there is no problem. But I prefer X5,
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies View RelatedNew PC (Dell) with Vista 32; re-installed first VS10+.
Because I have now Vista 32: I bought and installed a full VS12 (X2 PRO?).
Problem: when I go to the Share-step I can add clips to the project but I cannot see them in the right. So cannot add chapters or trim the clip in the share step. The buttons below the preview window stays inactive.
When I go further: I cannot see the preview of the video "Press 'play' button to start preview" stays on the screen.
When I go further till burning (DVD-folder), the program makes the folder.
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
I cannot get sound from my .MTS clips. I have installed Quicktime and they still don't play sound. It does for elements 10 but not fro Lightroom how to get sound?
View 4 Replies View RelatedHow do I get the sound to work on video clips? Some do and some do not. I unclicked Draft mode.
View 7 Replies View RelatedRunning Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View Relatedi'd love to see a tutorial on how to sync externally recorded sound to clips.
View 6 Replies View RelatedThe clips are playable with Quicktime or Windows Media Player.
View 4 Replies View RelatedI am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
I would like to know how to do to preview sound in AE without RAM previewing all the clip I'm working on. I have a clip of 3 mins and I need to preview it all from the begining to modify something at 2min45.
How can I RAM preview only a part of my clip ?
But I've added some color correction and some of my clips seem to be rendering out corrupted once the effects are applied. If I toggle the effects off it goes away, but toggling them on again and it's back. I've restarted the machine several times and the corruption reoccurs in the same spots. Is there a cache that I need to toss? When I rerender or export the the file the corruption remains.The effects I'm using are basic, auto color, fast color corrector, and brightness & contrast. here's what it looks like.
View 2 Replies View Relatedwhy cant i hear my music when i preview a slide show
View 6 Replies View RelatedEven though I've made sure that my sequence settings are exactly matching my clip settings (ProRes4444 or 422HQ) I'm getting a yellow bar over my sequence.
I'm working on a 2012 Mac Pro running OS 10.7.5. I downloaded Premiere Pro CC earlier today; I thought I'd play around with it to see how it compares to FCP7. Most of my NLE usage is very simple, just assembling sections of motion graphics and 3D animations rendered out of After Effects in the ProRes 4444 codec.
The "New Sequence from Clip" function isn't behaving as I'd expect. The comparable feature in FCP creates a sequence that matches all aspects of the selected clip (size, framerate, codec, etc.). The Premiere implementation appears to only match the sequence size and framerate to the selected clip.
If I create a new sequence from a ProRes clip, or tell the sequence to match the clip, I'd expect that clip to be sitting in my timeline with no bar of any color. But I get a yellow bar. When I go to Sequence Settings I see that the editing mode is Arri Camera, and the Video Preview is greyed out on an MPEG format. I have to go to Custom and manually select Quicktime, then specifiy the matching ProRes codec. Shouldn't those wrapper and codec settings be matched automatically too when I've specified that function?
That said, if I go in and manually match the codec settings to my clip I still get the yellow bar. If I select another sequence and click back on the new sequence the yellow bar is gone.
I'm assuming that this yellow bar issue is a display error of some sort, because if I export the sequence with "Match Sequence Settings" selected the export happens very quickly as I would expect with a Smart Render-compatible sequence.
I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.
I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?
View 3 Replies View RelatedJust installed my free trial for video studio pro 5 and I'm attempting to creat a time-lapse video using 200 jpeg images taken from my dslr camera.After doing the following;
Click File> Insert Media File to Timeline> Insert Photo for time-lapse/strobe and browsing for my images I get the following message "These files cannot be added to this project.
These files may be of unknown format.The computer does not have enough memory Or the file is copyright protected"
Each images is about 750kb in size and are jpegs.I'm using XP home.
Here is Mediainfo for file that VS X6 nor X5 can handle. It simply dies as soon as the file is placed on the timeline. Any reason this Panasonic GH3 created file can't be used in VS? (60p editing is enabled)
General
Complete name : P1020993.MP4
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 70.1 MiB
Duration : 21s 21ms
[Code] ......
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I would like to add a music file on one track, sound effects like bells, dramatic drums on another. Is this something that I can do with VSP x3? If so where can I find out how it is done? If not is there a way for me to say put special sound effects in back of the main music clip in different places in the timeline?
View 5 Replies View RelatedI have recently 'downsized' to a sanyo xacti vpc-cg100ex camera to lighten my load on holiday! this produces mpeg-4 video files which I copy straight to a folder on my laptop from the SD card.
I can put these into the vs library and tranfer them onto the timeline and add trnsitions, titles etc. however VS is closing down with increasing frequency.(same files on my old xp machine seem to work ok albeit depressingly slowly!)
I have been searching the forum and wonder if I should be converting the files to some other format before doing any editing....does that involve using the share option straight after loading the files, and if so, how?
the properties of the original file are
Type mp4 video,
1920 * 1080,
59 frames/sec, bitrate 252,
audio sample rate 48kh
the properties given for the file on the timeline are
Format Mpeg-4 file,
Vid Type H.264 Main profile video, Upper Field first,
Attributes 24bits 1920*1080 16.9
Frame rate 29.970 frames per s
Audio type MPEG AAC 48000 hz 16 bit stereo
I have not been doing any video at all for quite some time so am definately somewhat rusty.
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.