When I split audio and then create the sound file, that file and the audio in project also lost.
I can add audio file normally but when I mix many clips, I just can hear sound whenever I choose the clip only. If I choose the whole project, the sound will be lost although the background sound still exist.
When I replace X5 by X4, there is no problem. But I prefer X5,
Even after installing quicktime, I am still unable to view any video loaded to Elements 12. I can hear sound but no picture when I hit play. No no thumbnail photo of video available either, just blank with play button.
I am using Windows 8.1. most of the video content was taken with an iphone.
Can I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies View RelatedIn the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View RelatedI am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
I've been using X5 to edit a project that has about 20 small clips in it. I've noted that (1st occurrence of this) moving from one clip to the next in the main project timeline, the sound in the next clip just vanishes. Selecting the affected clip individually and then playing confirmed its got sound there.
This was first seen after turning ripple editing on (the little padlock went from open to closed). But various measures did not remove the effect:
- turning ripple editing off
- delecting the affected clip - the next clip in turn was affected by this
- closing X5 without saving the project changes, then re-starting X5 and opening that project. At the same point in the timeline, sound went away.
Is there any known explanation for this, and how can I remove this effect?
I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies View RelatedI bought VideoStudio x5 about 3 weeks ago, there has been a bit of a learning curve but I am starting to get what I want. I still cant figure out one problem. I am screen capturing with another program because well videostudios screen capture doesn't work that well. My program produces AVI's and I bring them into video studio and piece them together. When I piece videos together, it skips for some reason a second or 2 into the second track. I have tried converting to mp4, hdv 720p - 30p (for PC), AVCHD (1820x720 60P), "Same as first video clip" and they all do the same thing. Here I have a youtube link to a video that I converted from AVI to mpeg and you can hear when I say "Naming Conventions" there is no problem [URL]
Here I have a youtube link to a video that I combined 2 seconds from a previous clip and when I say "Naming Conventions" you can hear the problem. [URL]
I have purchase VideoStudio Pro X4 and in the sound library there are only 2 sound clips to choose from!
View 4 Replies View RelatedI have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I have installed VideoStudio Pro v6 on Windows Pro 64 bi. I tried insert the sound files onto an empty track/video and it just won't play the click ...the audio file just doesn't play.
I can play the sample videos but if I add a sound track that came with the software I get this error. What do i need to do to fix it?
The error message is:
Unable to play the file
[16804:2:1]
I cannot fade out the sound at the end of my movie.
I have just bought VideoStudio X5 and added the SP1. On my first try, I have added a MP3 file on my silent movie, on the music track.
On this track, I have shortened the music to the end of the movie and with the sound properties panel displayed, I have click the fadeout button which is now on. But when I test my movie or when I generate a video file, the music doesn't fade out and stops suddenly at the end of the movie.
Using VS exclusively now, so here come all the questions.
I cant seem to "drag" a simple space between 2 clips on the same track. I wish to have a 5 second delay in between two clips.
I produced a 4-track project which contains video, video-overlay, background music and a voiceover narration. I produced it in high-def.Everything plays on a pc and on a tablet but when played on a mobile device the narration is not heard.
I have made several projects this way and everytime I go to play the video on a cell phone you cannot hear my narration.
I cannot get sound from my .MTS clips. I have installed Quicktime and they still don't play sound. It does for elements 10 but not fro Lightroom how to get sound?
View 4 Replies View RelatedHow do I get the sound to work on video clips? Some do and some do not. I unclicked Draft mode.
View 7 Replies View RelatedRunning Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View Relatedi'd love to see a tutorial on how to sync externally recorded sound to clips.
View 6 Replies View RelatedThe clips are playable with Quicktime or Windows Media Player.
View 4 Replies View RelatedI am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
I created a DVD with is made of video and and a slideshow. The slideshow works fine within VideoStudio but once burnt on the DVD it does not work, the music plays on a black screen. The rest of the footage works fine, what could have happened?
View 2 Replies View RelatedI have a project that was filmed in DVCAM and captured as an AVI file. I want to mix in some footage that was filmed in HDV, on the same camera. Presumably I can capture it as an AVI too and just add it to the project? The project is:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have video files of the same performance from two cameras, and want to cut and match between the two. In the past what I've done is lay the firstone on the main timeline and then cropped where necessary to allow cutting to the overlays in tracks 2 and/or 3 as needed. This however proves to be rather time consuming and occasionally I get timing issues.
is there a facility in VS X4 to lay both tracks side by side (losing the audio from one of them) and then block out sections as required by (eg) making the overlay transparent, and thus keep the timing the same all through a piece...?
I had a time where I shot some home videos on my old Sony DV camera (type2 DV 29.97fps) and also some on my other digital cameras of various models which recorded in mjpeg (20fps), h.263(30fps), mpeg4sp (29.97fps), and even a few .asp. I want to combine all these in chronological order on DVD. But I worried about which format to choose when rendering such a mixture, since I've heard that type 2 DV should be lower filed first. Will that mess up the way the other files are rendered? I was wondering if i should render the DV out to DVD compliant mpeg2 first and then add in the others in another project.
View 2 Replies View RelatedI have to make a couple of changes to a piece I edited 2 months ago on Premiere CC. When I open the file premiere lists out several clips that it says are missing. I've hit "locate" but nothing comes up.
View 3 Replies View RelatedI have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
Whenever I import an AvI file into Corel Video Studio Pro X5 there is no sound whatsoever. Other file types work fine, but any and all AVIs I try will not play back any audio. I have tried at least a dozen from different origins and no success.
View 10 Replies View RelatedI'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.
The projects and source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to upload the files to Vimeo as:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
My question is if there's any benefit or drawback to outputting at 256 Kbps sound instead of 128? The file sizes are pretty similar (I guess the extra sound quality takes a bit of the picture kbps instead?) but I can't notice a difference with either image or sound quality.
I'm using Video Studio Pro X5.
I have a short project which I am trying to burn on to a DVD. When I play the DVD after I have successfully burned the project, I get video but no sound. I have tried both normalize audio checked and unchecked with the same results. I am using DVD-video as the recording format. I am running VS Pro x4.
View 3 Replies View Related