VideoStudio :: X5 Loses Sound Between Clips?
Oct 4, 2012
I've been using X5 to edit a project that has about 20 small clips in it. I've noted that (1st occurrence of this) moving from one clip to the next in the main project timeline, the sound in the next clip just vanishes. Selecting the affected clip individually and then playing confirmed its got sound there.
This was first seen after turning ripple editing on (the little padlock went from open to closed). But various measures did not remove the effect:
- turning ripple editing off
- delecting the affected clip - the next clip in turn was affected by this
- closing X5 without saving the project changes, then re-starting X5 and opening that project. At the same point in the timeline, sound went away.
Is there any known explanation for this, and how can I remove this effect?
View 14 Replies
ADVERTISEMENT
May 11, 2013
I have been using this product for years on XP, with success. However, just this past week, when I try to add an MP4 to the timeline, and play the clip or project, there's no sound, for about 80% of MP4's I've tried. I have uninstalled the product and SmartSound (both), and reinstalled, including all patches, having tried the sound before installing the patches. I know my hardware and OS are underpowered, but it worked, prior, without me making any system changes before this situation arose.
View 4 Replies
View Related
Apr 6, 2013
Can I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies
View Related
Oct 5, 2012
In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies
View Related
Aug 30, 2013
I am running the 30 days trial version of the VS pro X6, but the added clips are muted. important before buying).
When I add a clip the sound is ONLY played when volume for the clip is 100% (other value makes the clip mute) and is the clip preview, not the project preview. (project preview plays only the added soundtrack- if there is any).
Even if volume is 100%, when exporting the project, clip sound is muted (only the added soundtrack will sound).
- Of course I have tested several clips, and with or without an additional mp3 soundtrack.
- I also installed the just released VS SP 1, but no changes.
- I export (Share) using Vimeo HD template.
- Problem is not shown if I use VS 11 (which I also has installed).
My system characteristics are in my profile and also here:
- Win 8 pro 64 bits
- Dell Inc. Vostro 3360
- 1.70 gigahertz Intel Core i5-3317U
The clip's properties are:
Type: .MOV
-640x480
-dr 11347kbps
-total br: 11619 kbps
-fr: 30
-Audio br: 272kbps
-channels: 1 mono
-Audio sample rate: 16khz
View 4 Replies
View Related
Mar 7, 2012
I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies
View Related
Sep 22, 2012
I bought VideoStudio x5 about 3 weeks ago, there has been a bit of a learning curve but I am starting to get what I want. I still cant figure out one problem. I am screen capturing with another program because well videostudios screen capture doesn't work that well. My program produces AVI's and I bring them into video studio and piece them together. When I piece videos together, it skips for some reason a second or 2 into the second track. I have tried converting to mp4, hdv 720p - 30p (for PC), AVCHD (1820x720 60P), "Same as first video clip" and they all do the same thing. Here I have a youtube link to a video that I converted from AVI to mpeg and you can hear when I say "Naming Conventions" there is no problem [URL]
Here I have a youtube link to a video that I combined 2 seconds from a previous clip and when I say "Naming Conventions" you can hear the problem. [URL]
View 14 Replies
View Related
Feb 24, 2011
I have purchase VideoStudio Pro X4 and in the sound library there are only 2 sound clips to choose from!
View 4 Replies
View Related
Jul 13, 2012
When I split audio and then create the sound file, that file and the audio in project also lost.
I can add audio file normally but when I mix many clips, I just can hear sound whenever I choose the clip only. If I choose the whole project, the sound will be lost although the background sound still exist.
When I replace X5 by X4, there is no problem. But I prefer X5,
View 5 Replies
View Related
Oct 29, 2011
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
View 2 Replies
View Related
Jul 23, 2012
I cannot get sound from my .MTS clips. I have installed Quicktime and they still don't play sound. It does for elements 10 but not fro Lightroom how to get sound?
View 4 Replies
View Related
Jul 12, 2012
How do I get the sound to work on video clips? Some do and some do not. I unclicked Draft mode.
View 7 Replies
View Related
Oct 26, 2010
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies
View Related
Jun 13, 2012
i'd love to see a tutorial on how to sync externally recorded sound to clips.
View 6 Replies
View Related
Dec 4, 2012
The clips are playable with Quicktime or Windows Media Player.
View 4 Replies
View Related
Mar 17, 2014
I am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
View 7 Replies
View Related
Oct 28, 2011
I place a live music video clip in the timeline. I add the audio clip from a Zoom H2 to the timeline. I sync it up at the beginning matching the audio from the video clip. When I check it 25 minutes into the project the sync is no longer exact. If I slide the audio clip up two frames it is synced at the 25 minute mark but now it's not exact in the beginning. I need to use both sources of audio.
View 5 Replies
View Related
Oct 2, 2013
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
View 4 Replies
View Related
Dec 16, 2012
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
View 1 Replies
View Related
Jun 7, 2011
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
View 1 Replies
View Related
Apr 27, 2012
Whenever I import an AvI file into Corel Video Studio Pro X5 there is no sound whatsoever. Other file types work fine, but any and all AVIs I try will not play back any audio. I have tried at least a dozen from different origins and no success.
View 10 Replies
View Related
Feb 18, 2013
I'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.
The projects and source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to upload the files to Vimeo as:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
My question is if there's any benefit or drawback to outputting at 256 Kbps sound instead of 128? The file sizes are pretty similar (I guess the extra sound quality takes a bit of the picture kbps instead?) but I can't notice a difference with either image or sound quality.
I'm using Video Studio Pro X5.
View 2 Replies
View Related
Apr 18, 2011
I have a short project which I am trying to burn on to a DVD. When I play the DVD after I have successfully burned the project, I get video but no sound. I have tried both normalize audio checked and unchecked with the same results. I am using DVD-video as the recording format. I am running VS Pro x4.
View 3 Replies
View Related
Jul 1, 2011
Using VS Pro X2 on a 2.67GHz i5 with 4GB of memory running Windows 7 Home Premium.
Had lots of problems creating this project as during rendering to DVD or to a file it would get about 80% and then get the dreaded "Program not responding" message from Windows 7 Home Premium. I solved that problem by reducing the size of the many images that I had in the project and successfully rendered to an mpg file which has sound ok.
Now when I try to render to a DVD, at the preview stage there is no sound, but there was sound before I reduced the size of the images in the project.
View 8 Replies
View Related
Oct 25, 2012
I am using VideoStudio X5. Generally video clips in various formats play properly in VS - except for MPG clips. In the case of those, the sound is very "echoey". In other words all the sound is repeated just a second or so later even though I know it is fine in the original. I do not have the same problem in other formats such as avi or wmv.
View 14 Replies
View Related
Apr 29, 2012
I'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
View 2 Replies
View Related
Jun 10, 2012
I am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
View 9 Replies
View Related
Apr 2, 2013
In Edit, when I use Filter (FX) like Antishake, Sharpen etc. the sound for the clip disappears.
View 4 Replies
View Related
Apr 18, 2011
I just began using Version X4 of Corel VideoStudio Pro.
I just used it for the first time after upgrading from X3. I rendered a short video and when I tried playing it back the slide moves across the "time bar" BUT there is no motion on the screen. The same when I tried to play it w/Windows Media player.
I started coverting MPEG 4 video to DivX which always worked in X3. No I get no motion at all and no sound. Do I have a bad download?
View 2 Replies
View Related
Mar 13, 2012
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
View 2 Replies
View Related
Dec 13, 2012
I own a copy of Corel Video Studio Pro X3. Since installing the patches for it, the sound stutters on the finished videos that I make. Original files are fine. I had this problem on the previous computer I used this program with, and after searching this forum, found a hotfix for it. Unfortunately the hotfix link is no longer working.
View 3 Replies
View Related
