I own a copy of Corel Video Studio Pro X3. Since installing the patches for it, the sound stutters on the finished videos that I make. Original files are fine. I had this problem on the previous computer I used this program with, and after searching this forum, found a hotfix for it. Unfortunately the hotfix link is no longer working.
View 3 RepliesI have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
I am having trouble with stuttering video/audio while playing WMV files in VS Pro X5 SP1. Any clip which I try to view will stutter on playback (sounds like a scratched/dirty CD). These files play fine in Media Player Classic. Other file formats (e.g. mp4) play fine in VS, it is just WMV files that are doing this. I don't get any errors, it just doesn't playback correctly.
The WMV files were created within this installation of VS Pro X5 SP1. The original source varies. I've started with .MTS files from my Canon camcorder SD card (reader built into PC), or from mp4 files which I also created from this installation of VS. When I share the files, I get no errors. I've had it happpen with 3 minute files, and with 11 second files.
One example file that does this is:
file size 3,405 KB
Duration 11.064 seconds
Data rate 2481 kdps
Video: Windows Media Video 9
24 bits, 1280x720, 29.970 frames/sec
Audio: Windows Media Audio 9.2
44.100 KHz, 16 bits, Stereo
Aspect ratio 1.78:1.0
Is editable: yes
Project settings are:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 44.100 kHz, 16 Bit, Stereo
I've also tried changing the Project settings to this, but the WMV file still comes out as 44.1 and the same issue occurs:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 48.000 kHz, 16 Bit, Stereo
Not sure if this is related or not, but when I installed the latest version of VS Pro X5, I started having trouble with windows media player. At the moment, WMP won't play DVD's or WMV files because it says it doesn't have the codec. I'm running WPM 11 on Win XP and it is the most current version.
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedI have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies View RelatedI'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
This is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
I have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies View RelatedI'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
I have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.
Whenever I import an AvI file into Corel Video Studio Pro X5 there is no sound whatsoever. Other file types work fine, but any and all AVIs I try will not play back any audio. I have tried at least a dozen from different origins and no success.
View 10 Replies View RelatedI'm outputting DV-AVI files filmed on a Sony A1 in DV CAM as MPEG-4 videos for upload to Vimeo.
The projects and source files are:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
Matrox DV/DVCAM -- type 2
PCM, 48.000 kHz, 16 Bit, Stereo
I have been outputting to upload the files to Vimeo as:
MPEG-4 Files
24 bits, 1280 x 720, 25 fps
Frame-based
H.264 Main Profile Video: 5000 Kbps
44100 Hz, 16 Bit, Stereo
MPEG AAC Audio: 128 Kbps
My question is if there's any benefit or drawback to outputting at 256 Kbps sound instead of 128? The file sizes are pretty similar (I guess the extra sound quality takes a bit of the picture kbps instead?) but I can't notice a difference with either image or sound quality.
I'm using Video Studio Pro X5.
I have a short project which I am trying to burn on to a DVD. When I play the DVD after I have successfully burned the project, I get video but no sound. I have tried both normalize audio checked and unchecked with the same results. I am using DVD-video as the recording format. I am running VS Pro x4.
View 3 Replies View RelatedUsing VS Pro X2 on a 2.67GHz i5 with 4GB of memory running Windows 7 Home Premium.
Had lots of problems creating this project as during rendering to DVD or to a file it would get about 80% and then get the dreaded "Program not responding" message from Windows 7 Home Premium. I solved that problem by reducing the size of the many images that I had in the project and successfully rendered to an mpg file which has sound ok.
Now when I try to render to a DVD, at the preview stage there is no sound, but there was sound before I reduced the size of the images in the project.
I am using VideoStudio X5. Generally video clips in various formats play properly in VS - except for MPG clips. In the case of those, the sound is very "echoey". In other words all the sound is repeated just a second or so later even though I know it is fine in the original. I do not have the same problem in other formats such as avi or wmv.
View 14 Replies View RelatedI'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
I am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
View 9 Replies View RelatedIn Edit, when I use Filter (FX) like Antishake, Sharpen etc. the sound for the clip disappears.
View 4 Replies View RelatedI just began using Version X4 of Corel VideoStudio Pro.
I just used it for the first time after upgrading from X3. I rendered a short video and when I tried playing it back the slide moves across the "time bar" BUT there is no motion on the screen. The same when I tried to play it w/Windows Media player.
I started coverting MPEG 4 video to DivX which always worked in X3. No I get no motion at all and no sound. Do I have a bad download?
I am using Corel Video Studio Pro X4, I have asked the below questions previously, so far there has not been a solution. It appears Corel do not have any way to contact them when there is a problem
I chose this programme over Cyberlink Power Director as it had the 5.1 mixer and 3D capabilities. I now find Power Director Ultra 10 now has the 3D Capability, the 3D works very well, but no 5.1 mixer only a pesudo type 5.1 sound, the programme itself looks to be excellent quality.
Should there be no solution to my above problems, then the only choice I have is to use Power Director, a pity.
My previously posts are below -
3D Anaglyph - viewtopic.php?f=1&t=44703
5.1 Sound - viewtopic.php?f=1&t=41984
I am editing videos (that need to be completed urgently) in Corel Pro X4 and have serious troubles. VSP file looks absolutely fine during Project preview. Yet when MP4 file is produced (iphone/ipad HD format as suggested originally by support for the web) – then the sound disappears after a few minutes.I tried to play this MP4 of a few different computers and it looks the same. I am in deep sh…t with all my 20 videos.
View 1 Replies View RelatedI do have an video cd contain an mpeg 1 file and I am trying to convert it to dvd PAL I start the VS x12 trying to create a dvd but it is creating it without no sound so I try to make it as an iso file an I mount it to playing it in windows media player same problem the media player playing it without no sound so I tried to create an mpg2 file with 720x576 and 3500 constant video data rate Audio format :mpeg /stereo 224kb/s When I am doing this the mpg working very well with sound normally in media player so I try to create a dvd from this mpg file the same problem happen again the VS x12 create the dvd without sound.
View 10 Replies View RelatedI am new to this, I have just bought EasyCap adapter with audio it came with VideoStudio 10.0 and I am trying to copy my old holiday videos from my Hitachi VM-E210e 8mm camcorder which plays fine on the tv with sound but I only get a picture on my preview screen on my laptop and the sound from the room not from the video, the camcorder uses a yellow and white jack plugs to a usb, so the picture is ok but the sound is not from the recorded tape in the camcorder. i am using win 7 Home Premium, also I am totaly confused as to what to save them as (dvd,wmv etc etc) I would like to save them to disks to give to the family to work on their dvd players and computers.
View 1 Replies View RelatedOpened VideoStudio to re run an old .vsp file and the sound had disappeared completely. I checked using a music file and again there was no sound. Other programs are fine, Youtube works OK and my Microphone is still operating.
The loss of sound seems to only affect VSx5. I cannot work out if it is the program that has corrupted or I have pressed the wrong button. I have checked all the usual suspects like the mute buttons and these are OK.
I somehow caused my sound track to overlap. I can't seem to remove it. Down at the bottom of the picture looks like a white X on the bottom music track.
I hesitate to mess with it much because I had two video tracks and spend some time getting them synced.
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies View RelatedCan I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies View Relatedi was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
Corel VideoStudio Pro X6. The file is made in H.264 Video M2T ( large ) , in the DVD - mismatch-Sound !!!. If an MPEG-2 , the output DVD OK !?
VStudio X6 : there are 2 of the same file , 1 made in H.264 Video M2T (20000 bit) ( 1 hour ), 2 to MPEG-2 Video M2T (20000 bit)( 1 hour ) . When recording to DVD - 1 file ( H.264 ) - in DVD is sync sound , if 2 ( MPEG-2), then the DVD is fine . Why do so with the format - H.264 Video M2T ?