VideoStudio :: How To Save MP4 Video So It Has No Sound
Oct 23, 2011
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies
ADVERTISEMENT
Aug 27, 2013
I have a small ~180 MB wmv file and I am just trying to trim 10 seconds out of it. This file plays fine in Windows Media Player. When I bring the file into a trial version of VideoStudio X6 pro (evaluating whether to purchase) there are sections of silence appearing consistently in the area that I need. I can see the silence in the 'audio track'. This silence does not exist when playing the video in Media Player.
I also noticed (possibly related) that the video will simply stop playing at points. If I move the scrubber a few seconds after the 'stop point' and hit play it will play again for a bit and then stop suddenly again.
View 7 Replies
View Related
Jul 16, 2013
If you can mirror or flip a video clip without effecting the sound, using VideoStudio Pro 4?
View 3 Replies
View Related
Nov 19, 2012
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies
View Related
Dec 16, 2010
I have Windows 7 and every time I put a song in the project and play it, no sound comes along. It just stays still and after a few seconds goes to the end of the sound file.
Also, whenever I edit a video that has sound, when I play the project, the sound comes all wrong in the part of the edited video. If I did nothing in other videos of the same project, the sound comes good from them. It happens with x2 and with x3.
View 1 Replies
View Related
Oct 29, 2012
Using X5 to create a video file from a project file in the timeline.
After the file completes rendering, the project preferences default is set to play the rendered file. But I find that when the playing commences after rendering, the sound has an echo effect that isn't part of the original files. Like the original sound is reflecting off walls, and you get the same sound just spaced apart by a small time period. I've tracked this to what appears to be X5 playing both the rendered file and the project file at the same time. If I turn the project preferences item "play after render" off, off course nothing happens after rendering completes. And separately playing the rendered file, the sound is normal.
Is there a way to stop this echo effect? Ideally, just play the rendered file only. But failing that, change the preferences default. However, there does not seem to be any way to change the project preferences default for this item.
View 14 Replies
View Related
Feb 18, 2013
I have a project which is a party with background burble. I cut to a mute cutaway shot of the mountains outside the window, then back into the party. I want the background burble to run right through. How can I strip some sound off a combined video clip and lay it under the mute outdoor shot?Used to do this quite easily in 16mm.
View 11 Replies
View Related
Oct 29, 2010
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
View 11 Replies
View Related
Jan 2, 2012
Using VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
View 2 Replies
View Related
Jun 5, 2011
I downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
View 8 Replies
View Related
Apr 19, 2012
When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies
View Related
Oct 26, 2010
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies
View Related
Jun 9, 2012
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
View 2 Replies
View Related
Nov 27, 2010
I've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies
View Related
Jun 30, 2013
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
View 8 Replies
View Related
Jun 22, 2011
I have recently upgraded from VideoStudio 12 to Pro X4, and have noticed that I don't have all of the Video Save Options (specifically Media type and Audio format) that I have with 12.
I produce video for playback by a regional local access provider, and their requirements are mpeg-2 video with mpeg layer 2 audio. Both of these are options that are available in 12 but not X4. I understand that NTSC DVD video is mpeg-2, but I'm still at a loss with the audio format.
Here is a screenshot of the video/audio format I need to be able to produce:
View 4 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 2, 2011
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video
Total Frames: 6,356
Attributes: 24 bits, 1280 x 720
Frame rate: 25.000
Data rate: 4836 Kbps
Audio Type: MPEG AAC Audio
Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
View 4 Replies
View Related
Feb 8, 2012
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
View 5 Replies
View Related
Nov 27, 2010
Simple thing required how to save settings
We go to
Ulead Video Studio SE DVD then
Movie Wizard then
Capture then
Option then
Video and Audio Capturing Property Settings…
Source (I use EasyCap (Syntek STK1150)it is working fine)
The only thing I need is to tell the program to remember
Input source: Composite video and TV system: PAL.
Every time I start program the setting are lost! the default S-Video and NTSC (Some time you want to record something on TV and you losing the moment setting your Ulead VideoStudeo SE DVD)
View 5 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Aug 26, 2012
I have installed a trial version of Photoshop CS6 and am editing video. When I open short videos to edit the sound on the original video plays fine but when I open a larger video (1 hr) the sound does not play. I have played with the mute button to no avail. Sound is fine on the original file. Is this a limitation of the trial version or a bug or some mistake I am making?
View 4 Replies
View Related
Feb 5, 2014
When i upload my video clips they appear as an "audio" and just sound and not a video clip.
View 2 Replies
View Related
Nov 11, 2012
how to fix an audio issue with exporting video from Photoshop.I am choosing the quick time format however the option for sound is always grayed out. from the animation panel I have the audio enabled and I can hear it when I play back from within Photoshop.
I am using Photoshop CS4 extended on PC Windows 7.I understand the following -
-For audio I need to choose Quicktime format
-Photoshop is primarily image editing software (with video capabilities)
View 3 Replies
View Related
Jul 9, 2013
When I play the video from "importing video frames into layers" the audio doesn't come out anymore.
View 1 Replies
View Related
Jul 2, 2012
I'm not finding any sound management features for the video part of PS or anything in the help files yet either.
View 1 Replies
View Related
Nov 28, 2012
I can see my mts video files in Lightroom 4, but however they do not have sound. Is there anything that I could do to have the sound? (The sound is working for videos that I made with my Nikon 3100 camera, but not for the videos that I made with my Sony camera.) Also, is there a way to light the video files from Lightroom 4 to Adobe Premiere, as Adobe Premiere seems to have more editing capabilities and plays the sound from my Sony videos?
View 3 Replies
View Related
Feb 19, 2014
if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as way as a separate thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separate HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the program?
And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.Used to be all much better and simpler in previous editions.
View 3 Replies
View Related
May 14, 2013
i edit video tutorials in Photoshop CS6. The voice is on its own mono audio track. The voice track will be cut multiple times within Photoshop to adapt to the ongoings in the video. After editing the audio track in Audacity (or sometimes Audition) i wonder which file format i should use for the audio – so that i can import it and easily cut it in Photoshop CS6.
I used MP3 192 kBit, but it seems that sometimes i cannot exactly mark the millisecond where i want to cut. The marker bar jumps around and I get uncontrollable results. Of course this can be a general cache problem, but i wonder if there is a certain audio file format that's best to edit (file can be uncompressed and large). I do make long pauses in speech in order to get more easily cuttable tracks.
If i use MP3, is VBR more difficult to edit? Should it be another file format altogether? Photoshop CS6 imports these audio file formats:
AAC, M2A, M4A, MP2, MP3, WMA, WM,
some of which can't be written with the audio softwares i use.
View 3 Replies
View Related
Feb 12, 2014
I'm running elements 11 (on windows 8 pro), and I noticed when I click on a video, (the thumbnail is there in organiser), and hit "play" all I get is grey screen, the timeline runs fine, theres sound, just no image.
View 4 Replies
View Related
