VideoStudio :: Cut 20 Sec And Save Of 30 Min Video
Jun 9, 2012
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
View 2 Replies
ADVERTISEMENT
Oct 23, 2011
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies
View Related
Nov 27, 2010
I've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies
View Related
Jun 30, 2013
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
View 8 Replies
View Related
Jun 22, 2011
I have recently upgraded from VideoStudio 12 to Pro X4, and have noticed that I don't have all of the Video Save Options (specifically Media type and Audio format) that I have with 12.
I produce video for playback by a regional local access provider, and their requirements are mpeg-2 video with mpeg layer 2 audio. Both of these are options that are available in 12 but not X4. I understand that NTSC DVD video is mpeg-2, but I'm still at a loss with the audio format.
Here is a screenshot of the video/audio format I need to be able to produce:
View 4 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 2, 2011
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video
Total Frames: 6,356
Attributes: 24 bits, 1280 x 720
Frame rate: 25.000
Data rate: 4836 Kbps
Audio Type: MPEG AAC Audio
Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
View 4 Replies
View Related
Feb 8, 2012
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
View 5 Replies
View Related
Nov 27, 2010
Simple thing required how to save settings
We go to
Ulead Video Studio SE DVD then
Movie Wizard then
Capture then
Option then
Video and Audio Capturing Property Settings…
Source (I use EasyCap (Syntek STK1150)it is working fine)
The only thing I need is to tell the program to remember
Input source: Composite video and TV system: PAL.
Every time I start program the setting are lost! the default S-Video and NTSC (Some time you want to record something on TV and you losing the moment setting your Ulead VideoStudeo SE DVD)
View 5 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Mar 10, 2012
I've just had a problem with LR4. Instaled the full version a few days ago on my old computer. Just got a new computer where I instaled LR4 and imported all my latest work and noticed that all video (.mov) metadata were not saved on to files (Photos are OK!!!) So all editing and rating/flags/color filter I've done is gone.
Thought that I forgot to save Metadata on my old computer and did a couple of tests.
I did some rating and some color filters on my actual catalog then saved the metadata a couple of times. Removed from the Library and re-imported and the metadata were not there again. Did the same to Photos and is fine!
LR4 does not write XMP to video files?
Just lost hours of work on cuting and rating a video Job since my old computer is gone.
View 2 Replies
View Related
May 30, 2011
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
View 2 Replies
View Related
Jul 20, 2013
In photoshop, I've created a new document in film & video size as shown below.
After I've done my design as saved, I bring it to preview in premier pro. The size didnt match my video settings. how to solve this?
in photoshop view:
Saved image view:
View 1 Replies
View Related
Jun 1, 2013
At some time in the past when I saved a psd file I would have an icon or thumbnail in explorer. No it doesn't save those thumbs. Actually it saves them but they appear to be corrupt.
I'm running win7 and I have a dll (don't remember which one) that allows for the preview thumb in explorer so I know it's an issue with cs5.
View 2 Replies
View Related
Jul 17, 2013
Installed Lightroom 5 upgrade. On LR 4 I can export a 55 slideshow as MP4 with 1080p preset using all four cores on a win7-64 (Intel I7) in about 6-8 min (used 70-80% processor). In LR5, the CPU never goes above 15% processor and takes 45-50 minutes. I can flip between the two (not at the same time) to test. Luckily, no catalog changes other than what the automatic conversion did.
Interestingly, I see a ".aac" and ".m4v" in the destination directory during the rendering process (they eventually goes away and are replaced by the ".mp4" at the end of the rendering export process).
Why LR5 is not taking full advantage of the multi core CPU? How to improve performance in this area?Overall, its very disappointing. I have to go back to LR4 to re-render the slideshows that eventually get exported to a DVD (but that's another story).
Additional information, when I render the slideshow, it looks like LR4 exports using the native executable (no spawned subprocesses), but LR5 spawns a separate process to handle the export/rendering process.
Executable: C:Program FilesAdobeAdobe Photoshop Lightroom 5SupportDynamicLinkMediaServerdynamiclinkmediaserver1.0amecomman d.exe
Options: --port=50015 --ip=127.0.0.1 d1 m0 --source="D:AAAAAppDataLocalTempslides_export04A7BAA7-5CE4-416E- 9625-E1971F4A7E83.lrcat" --sourceid=bff43513-e0ff-4178-a7c1-54abdfa19386 "C:Program FilesAdobeAdobe Photoshop Lightroom 5SupportVideo Export PresetsH-1920x1080-2997.epr" 00000000-0000-0000-0000-000000000000 1211250228 1313424203 "" "" "" 0 "V:MP4Vacationslah-blahfilename-goes-here.mp4" 793856f3-1cc5-4a25-adb2-4de660c3aef5 0 104654592000000 128
View 5 Replies
View Related
Jul 25, 2011
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
View 9 Replies
View Related
Mar 28, 2013
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies
View Related
Mar 3, 2013
Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies
View Related
Dec 18, 2010
I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
View 3 Replies
View Related
Feb 19, 2013
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
View 1 Replies
View Related
Aug 25, 2013
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
View 5 Replies
View Related
Nov 27, 2010
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies
View Related
Mar 6, 2012
I have been having a beast of a time trying to find a program that will support the files from my new camera. It records in 1920 by 1080 30fps .MOV. Windows movie maker and my old adobe program will not recognize this video I have recorded. Does corel pro x4 is capable of importing and editing this footage? Would love to know before I purchase. I am not looking to convert the video either, I have tried that and it has really hurt the quality.
View 4 Replies
View Related
Jan 17, 2013
I have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?
I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.
View 1 Replies
View Related
Oct 6, 2010
Am trying to rotate a MPG video taken with an original aspect ratio of 16:9 in portrait mode ie long side vertical. The video loads into Videostudio fine, ie the image is sideways-on as expected and there are the black bars at top and bottom in the edit window as is usual for 16:9 videos. If I use the rotate button, this does rotate the video, but there are now black bars down the left/right sides as well as top and bottom, and the viewable image looks 4:3 (?) - it is flattened ie people look short and fat. Is there a particular project property/create video setting I need to set. I don't understand the settings - I'ver tried things like 'non-square pixel rendering' without knowing what to expect - but nothing so far seems to work.
View 4 Replies
View Related
Jun 15, 2011
Whichever video format I have on the timeline or in the batch converter, I never can find a setting to create interlaced MOV video's with VSX3. Is this correct?
View 5 Replies
View Related
Jan 11, 2011
Probably a well worn topic but I've lost all my video filters in VS Pro X2? Just trying to crop some green screen shots that still show the garage wall.
View 2 Replies
View Related
