VideoStudio :: Missing Video Save Options In Pro X4
Jun 22, 2011
I have recently upgraded from VideoStudio 12 to Pro X4, and have noticed that I don't have all of the Video Save Options (specifically Media type and Audio format) that I have with 12.
I produce video for playback by a regional local access provider, and their requirements are mpeg-2 video with mpeg layer 2 audio. Both of these are options that are available in 12 but not X4. I understand that NTSC DVD video is mpeg-2, but I'm still at a loss with the audio format.
Here is a screenshot of the video/audio format I need to be able to produce:
View 4 Replies
ADVERTISEMENT
May 28, 2009
I have CS3, when I do save as, only about six options are avialable (tif, pdf, and a few others). Jpegs, Gifs, etc are all gone. Is there some setting I've inadvertantly chosen or reason I can't save as jpeg?
View 4 Replies
View Related
Dec 24, 2010
I have installed the Corporate and Education version of VideoStudio Pro X3 on 20 computers in a lab at a small high school where this product represents a significant portion of our software budget. In the documentation, I see options like "Easy Edit" and "Burn" on the startup screen, however my startup screen only has the options of "Advanced Edit" and "DV-to-DVD Wizard". At every turn, where an option to burn a DVD should be present, buttons are missing. I have uninstalled/reinstalled a hundred times looking over every option, and I can't find anything that is unchecked. Do you know why VS Pro X3 has no Burning capabilities for me?
View 2 Replies
View Related
Aug 25, 2013
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
View 5 Replies
View Related
Jan 2, 2010
I recently upgraded from VS9 to X2. When I "Create Video File," the audio format options I have are:
PCM
IMA ADPCM
CCITT A-Law
CCITT u-Law
GSM 6.10
Microsoft ADPCM
I seem to recall having more options than this with VS9, but I'm not sure if it's a VS issue or something that needs to be installed on my computer. I also have a new computer, so I don't have all the codecs and audio encoders that I had previously collected over time on my old computer. For example, I used to encode videos for youtube using Xvid. I always had the option for mp3 audio. Now, I only have the above options. I don't even know what most of those are.
Are there some plug-ins that I need to install?
Also, is there a manual that I can download somewhere? I didn't see anything in the install folder, the support area of Corel's site
View 14 Replies
View Related
Jan 26, 2012
I can only create project with SD frame sizes. 720p or 1080p is not offered in the Project details setup.
Also when I want to capture from a 720p webcam I can only select "DVD" in the dropdown list for the capture proifle. Why are all the HD features missing
VS X4 Pro with SP2 on W7 x64.
View 2 Replies
View Related
Mar 26, 2012
how to change the default options when creating a video?
I keep forgetting to turn off "smart render" and "non-square pixel rendering" in the options dialog when I convert.
Also it would be nice to be able to turn on Dolby 5.1 by default as well.
View 2 Replies
View Related
Nov 13, 2011
I am using VS Pro X2.
When I go to my Video Filters they are gone.
I have renamed my vfilter.rsf with no results, as well as the other fixes suggested in this furum for VS10. There does not seem to be a topic for this issue for X2.
View 3 Replies
View Related
Dec 10, 2012
When capturing video, other formats besides DVD are missing. I am trying to import video for outputting Blu-Ray but I am unable to select Blu-Ray as the imput format. It's not greyed out, it's missing along with other formats. The only format that you can select is DVD.
View 14 Replies
View Related
Oct 16, 2011
Using VS X2, There is only black screen when editing sample file or any other video. All load correctly and can be viewed as individual clips but only black screen when playing "project" . Have re-installed program (repair) - no change.
View 6 Replies
View Related
Jun 1, 2011
I am a user of Video Studio X2. I am having problems seeing video. When I open a project, it appears to open normally but when I play it, no video shows, just the sound. If I insert a video file onto the timeline, I get a message which says "Unable to open file" Below that is says "Catastrophic Failure" and in the lower left of the message it has the number [17101:70:2]. The exact same file will open and play normally in other players such as Windows Media Player.
View 14 Replies
View Related
Jun 9, 2012
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
View 2 Replies
View Related
Oct 23, 2011
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies
View Related
Nov 27, 2010
I've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies
View Related
Jun 30, 2013
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
View 8 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 2, 2011
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video
Total Frames: 6,356
Attributes: 24 bits, 1280 x 720
Frame rate: 25.000
Data rate: 4836 Kbps
Audio Type: MPEG AAC Audio
Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
View 4 Replies
View Related
Feb 8, 2012
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
View 5 Replies
View Related
Nov 27, 2010
Simple thing required how to save settings
We go to
Ulead Video Studio SE DVD then
Movie Wizard then
Capture then
Option then
Video and Audio Capturing Property Settings…
Source (I use EasyCap (Syntek STK1150)it is working fine)
The only thing I need is to tell the program to remember
Input source: Composite video and TV system: PAL.
Every time I start program the setting are lost! the default S-Video and NTSC (Some time you want to record something on TV and you losing the moment setting your Ulead VideoStudeo SE DVD)
View 5 Replies
View Related
Jan 14, 2011
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies
View Related
Oct 22, 2013
I am facing problem while using Save / Save As / Save for web options in my Photoshop. On clicking Save / Save As commands, my photoshop gets closed abruptly and I am losing all data. If I choose Save for Web option, the file Save dialog box appears and when I click on the 'Save' button, the application gets closed abruptly.
Â
It was working fine yesterday. My version is bundled in the Technical Communicator suite 3.5 and I faced some problems with Adobe Acrobat, for which my IT team took support from Adobe and got it resolved just two days ago. (Case ID - 184809966)
View 10 Replies
View Related
Feb 4, 2009
i have downloaded and intalled photoshop cs3 extended but i cannot see the 3D in the title bar can anyone tell me what has happened to it and how i can solve the problem.
View 6 Replies
View Related
Jul 16, 2009
I'm touching up some images I want to export to Premiere Pro 2.0 and wanted to make sure I'm using the write/best settings. I selected the 720x480 pre-set when making a new project. It has the following settings; 720x48072 pixels/inch (should I go larger?)RGB (should I use CMYK?)8 bit (should I use 16 bit?) Are the default settings best? I want to use the largest/best image quality possible. I'm using the CS2 suite btw.
View 1 Replies
View Related
Aug 10, 2006
Well my problem is that the toolbar that comes up when you press on (example paintbrush tool or type text tool), you know that stripe above evreything where you can can select font and font size and brush size and that stuffs, well that stripe is gone.
I have selected Window and then toolbar but the problem is that I must have pull that thing away from the window and so know I relly don't know where that stripe is. (The stripe is where you can select font or font size, brush or brush size. I call it the stripe ) Well I am getting so crazy because I doon't know how to get that thing back?
View 4 Replies
View Related
Mar 25, 2009
My menu bar has almost vanished. All I can see is "File, Window and Help" all the others have disappeared. I looked up what to do and CAD help told me to go to Window and then click on Pulldowns but this isn't an option that I can see when I click on Window.
View 7 Replies
View Related
Feb 12, 2013
since CS6 there are no options for pressure anymore. I use a wacom tablet intuous4.
View 2 Replies
View Related
Jun 26, 2011
In PSP X2, the menu options went suddenly missing.
I can see the Menu Bar (File, View, Effects, etc.). However, when I click on, say, File, I can see the drop-down options, but none of the options expand into their sub-menus. All I see is a grey box where the options should be.
I just now was able to reinstall PSP X2 after many months of problems due to the usual "illegally modified" message. It's very frustrating to say the least.
View 3 Replies
View Related
Feb 26, 2013
For some reason all of my linetypes have disappeared, and even when I go to Load, there are no options. The only linetypes available are lines and dashed lines, and I have a fence linetype but it does not show the circular pattern in the fence. How can I get these back?
View 1 Replies
View Related
May 12, 2013
When I choose a tool, the value(like Brush size, Opacity...) in "Tool Option" often become blank.
By the way, if I drop the "Tool Options" out of the "Tool Box", the values appears.
View 4 Replies
View Related
Sep 18, 2012
My guided tab options are missing on my pse 10 what shall I do? I have a PC
View 5 Replies
View Related
