Well my problem is that the toolbar that comes up when you press on (example paintbrush tool or type text tool), you know that stripe above evreything where you can can select font and font size and brush size and that stuffs, well that stripe is gone.
I have selected Window and then toolbar but the problem is that I must have pull that thing away from the window and so know I relly don't know where that stripe is. (The stripe is where you can select font or font size, brush or brush size. I call it the stripe ) Well I am getting so crazy because I doon't know how to get that thing back?
I cannot seem to find the clone tool options in the EDIT TAB. I have used PSP from version 7 through version X2. Normally when you click on the clone tool a series of options appear in the upper left hand corner near the pull down menus. One of the options is the ability to adjsut the size of the clone tool. These tool adjustment options are missing in version X4. Interestingly, the tool options are available in the Adjust tab.
I watched a tutorial done by AdvancedTshirts.com that showed 2 options for the Attract and Repel drawing tools. The options were in the Property Bar and one was to set the sharp tip option and the other was to set the round tip option. I'm using v6.2 but they are not there when I select either tool.Also, I have to drag very slowly or it doesn't push or pull the edge.Â
i have downloaded and intalled photoshop cs3 extended but i cannot see the 3D in the title bar can anyone tell me what has happened to it and how i can solve the problem.
I am having a weird issue whenever I make a selection with the pen tool and right click and make it a selection. The selections (dancing ants) go around the outside of it. I know to hit Shift+Ctrl+I and it inverses it normal.
I have CS3, when I do save as, only about six options are avialable (tif, pdf, and a few others). Jpegs, Gifs, etc are all gone. Is there some setting I've inadvertantly chosen or reason I can't save as jpeg?
I have installed the Corporate and Education version of VideoStudio Pro X3 on 20 computers in a lab at a small high school where this product represents a significant portion of our software budget. In the documentation, I see options like "Easy Edit" and "Burn" on the startup screen, however my startup screen only has the options of "Advanced Edit" and "DV-to-DVD Wizard". At every turn, where an option to burn a DVD should be present, buttons are missing. I have uninstalled/reinstalled a hundred times looking over every option, and I can't find anything that is unchecked. Do you know why VS Pro X3 has no Burning capabilities for me?
I recently upgraded from VS9 to X2. When I "Create Video File," the audio format options I have are:
PCM IMA ADPCM CCITT A-Law CCITT u-Law GSM 6.10 Microsoft ADPCM
I seem to recall having more options than this with VS9, but I'm not sure if it's a VS issue or something that needs to be installed on my computer. I also have a new computer, so I don't have all the codecs and audio encoders that I had previously collected over time on my old computer. For example, I used to encode videos for youtube using Xvid. I always had the option for mp3 audio. Now, I only have the above options. I don't even know what most of those are.
Are there some plug-ins that I need to install?
Also, is there a manual that I can download somewhere? I didn't see anything in the install folder, the support area of Corel's site
My menu bar has almost vanished. All I can see is "File, Window and Help" all the others have disappeared. I looked up what to do and CAD help told me to go to Window and then click on Pulldowns but this isn't an option that I can see when I click on Window.
I have recently upgraded from VideoStudio 12 to Pro X4, and have noticed that I don't have all of the Video Save Options (specifically Media type and Audio format) that I have with 12.
I produce video for playback by a regional local access provider, and their requirements are mpeg-2 video with mpeg layer 2 audio. Both of these are options that are available in 12 but not X4. I understand that NTSC DVD video is mpeg-2, but I'm still at a loss with the audio format.
Here is a screenshot of the video/audio format I need to be able to produce:
In PSP X2, the menu options went suddenly missing.
I can see the Menu Bar (File, View, Effects, etc.). However, when I click on, say, File, I can see the drop-down options, but none of the options expand into their sub-menus. All I see is a grey box where the options should be.
I just now was able to reinstall PSP X2 after many months of problems due to the usual "illegally modified" message. It's very frustrating to say the least.
I can only create project with SD frame sizes. 720p or 1080p is not offered in the Project details setup.
Also when I want to capture from a 720p webcam I can only select "DVD" in the dropdown list for the capture proifle. Why are all the HD features missing
For some reason all of my linetypes have disappeared, and even when I go to Load, there are no options. The only linetypes available are lines and dashed lines, and I have a fence linetype but it does not show the circular pattern in the fence. How can I get these back?
I want to stroke a bezier curve with the Pen tool. The color of the stroke I can manage all right, but I am totally unable to find out how I edit the line type and its width in Pen tool. In the leftmost submenu showing the pen tool, there are several preset options (for the pen tool and other tools), but none of which I need. What I want, is simply a 1 pixel wide pen which draws whole lines, not dashed or dotted. And I would also like to have some feathering and/or antialiasing options in the stroke.
I have just installed CorelDRAW x4 and when I first used the 'Duplicate' tool, a pop up box appeared. The second time I used it, the pop up box did not appear and I cannot find how to open it again.
While creating a drawing yesterday, I noticed that the RMB Options to modify a detail view has disappeared?
- Cutout Shape
- Detail Boundry
- Connecting line
I am not sure how long this has been like this, What I do know is that I had a corrupt model, (Broke when it migrated to 2013) I restored from backup and tested the model in ver 2012.
I can not say if bouncing between the two versions of inventor has perhaps changed something, or of this option has not been available for a while? Â Autodesk Product Design Suite Premium 2014 SP1 Build 222 Intel Core i7 (950@3.07GHz) Windows 7x64 (Home) - 12GB Ram Nvidia GeForce GTX 560 Ti (1Gig - Ver:331.65)
And posts elsewere, there are two more buttons on the bottom of the options dialog box, under the user preferences tab, that I am missing. One is Initial setup and the other is default scale list.
I am trying to add alt tags to objects in an InDesign CS5 project. The guidance I can find tells me to go to Object > Object Export Options.The problem I have is, there is no Object Export Options option available..
I'd like to be able to use one tool with two different options at the same time. For example the cloning tool once in 30 % and second in 100 %. Â Maybe Adobe could think about this upgrade?
In the process of trying to find out how to name virtual copies I came across Julianne Kost's blog which explained it very well.
However, I can't find the rather useful option of showing "copy name or file name" but rather just "copy name" or "file name" on their own. Since I'm using LR3 (Mac), is this a feature available only in LR4 or am I doing something wrong?
When I click once on a tool to choose it, the tool's options (ex. the 3 options of the lasso) stay displayed so that I have to re-click (anywhere) before I can use it. This by opposition to the normal behavior of PS that is when you click on a tool it is choosen and you can use it right away. I must have change a preference but I can't find wich. Photoshop CS3 extended (10.0) on Mac
The tool pallets in all my Creative apps Photoshop, Illustrator and Indesign have just stopped working, ie the secondary hidden tools do not appear when you click on the tool, so I am unable to access the other tools. Seems like it should be something pretty simple, but it is eluding me,
I just upgraded my mom from PSE5 to PSE11....is there a way to detach the Tool Options from the BOTTOM and move it back up to the top? I'm finding it's confusing her because she likes to have her Photo Bin open at all times and she's used to seeing the Tool Options appear at the top like in previous versions of PSE. Â Is there a plugin that can change it or an option someplace I'm missing?
The "Apply" button is missing on my print options menu (XDPX9). I cannot apply any of the functions such as Imagingsetting - crop marks, output settings, layout settings, separations settings.
after using the crop tool in Photoshop CS6, the Presets and RGB channels options are greyed out on the curves adjustment layer, IF that layer's Properties are displaying at the time. I find I can get the options back if I open and close Curves Display Options. Â I am running Windows 7 x64, AMD Radeon HD 5800 with latest drivers (same problem with older drivers).
Have used all sorts of queries but can't seem to locate how to: Â Move the tool options from being displayed on the bottom of my workspace to the top (like a bar across the top). Â I can't seem to find anything to "drag" it or move it.
