Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
I have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies View RelatedVideo Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
I'm running Windows 7 64-bit.. There is no error message, it just says Corel VideoStudio X3 has stopped working... The video is only 48 seconds long (A test video) 1280x720 and was recorded at 30fps.
I have an NVIDIA GeForce GTS 250 Video Card and a 3.4GHz processor and 6GB of RAM
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
When I said 20 seconds. I just meant that as an example. For saving as an avi, I just wanted to use it in another project. I only wanted to be able to cut out a little part of a short part of a video on a video and overlay track and use just that part somewhere else. without saving the whole program that is about 20 minutes long. I try for nothing complicated, So I have to use the blue track above the timeline. That is what I have to figure out how to use it.
Posts: 4
Joined: Thu Jun 07, 2012 3:32 pm
operating_system: Windows 7 Home Premium
System_Drive: C
32bit or 64bit: 64 Bit
motherboard: intel
processor: amd
ram: 3 gb
Monitor/Display Make & Model: hp
Private message
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies View RelatedI've recently purchased VSX3 and can't not edit any videos. I have VSX3 loaded on two computers. On my laptop, I can "Mark-In/Mark-Out", but when I "Save Trimmed Video", the Rendering stops at 91% hang the software stops responding. On my desktop, I can "Mark-In/Mark-Out", but I do not get the option to "Save Trimmed Video". It is grayed out.
View 1 Replies View RelatedI have recently upgraded from VideoStudio 12 to Pro X4, and have noticed that I don't have all of the Video Save Options (specifically Media type and Audio format) that I have with 12.
I produce video for playback by a regional local access provider, and their requirements are mpeg-2 video with mpeg layer 2 audio. Both of these are options that are available in 12 but not X4. I understand that NTSC DVD video is mpeg-2, but I'm still at a loss with the audio format.
Here is a screenshot of the video/audio format I need to be able to produce:
Is there any way of importing vsp x4 files back into x3
View 9 Replies View RelatedI thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
I just purchased Video Studio Pro X4 and I'm hoping it wasn't the wrong decision. We do a lot of voice overs and wanted to start adding subtitling and audio swap to our list of services. Subtitling with the software has proven to be easy, as well as the audio swap. But I've just ran into a problem that I can't solve (I'm an audio guy through and through...but my video skills are low)
Video Type: H.264 Baseline Profile Video
Total Frames: 6,356
Attributes: 24 bits, 1280 x 720
Frame rate: 25.000
Data rate: 4836 Kbps
Audio Type: MPEG AAC Audio
Audio Attributes: 48000 Hz, 16bit stereo
I easily swapped the original audio for ours and wanted to render the video exactly as it was given to me. However, when I try using the option: "Save as First Video Clip" it gives me the error:
"The frame size (1280 x 720) of the video file does not match the settings and therefore cannot be trimmed." 18706:1:1
This happens on both of my computers (Windows XP & 7). Am I missing some codecs...my video cards not up to snuff, or something else? Again, I know little about video.
In Settings, I tried changing the project properties to similar settings as the original video, but the highest frame size it will give me is 720 x 480; and 'user defined' is grayed out. Not sure if any of that matters at all.
Lastly, yes I can manually type in all the info in the Custom option and can successfully render a video with similar specs, but I was hoping to just use the "Save as First Video Clip" option.
Simple thing required how to save settings
We go to
Ulead Video Studio SE DVD then
Movie Wizard then
Capture then
Option then
Video and Audio Capturing Property Settings…
Source (I use EasyCap (Syntek STK1150)it is working fine)
The only thing I need is to tell the program to remember
Input source: Composite video and TV system: PAL.
Every time I start program the setting are lost! the default S-Video and NTSC (Some time you want to record something on TV and you losing the moment setting your Ulead VideoStudeo SE DVD)
Was able to trim and save 11 clips in new video files over 2-3 sessions, but then program hung after initiating 12th save. No duplicate file names, ie file already exsists. Computer show 100% CPU usage implying program has gone into loop. Have to use Window task mgr to end VideoStudio. When restarted VS indicates it is completing save started in previous session but creates empty file. Removing all Ulead files and folders I can find from computer left after uninstall, and all references I can find from registry, then reinstalling VideoStudio does not fix problem. I did not remove the video files in my user directory. There are no project files. Assume something remains on computer preventing clean reinstall and removal of bug.
View 8 Replies View RelatedIs it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
View 3 Replies View RelatedUsing LR4.4 on Windows7 64-bit Pro, and I am new to video. I shot a 1 minute segment and used the tools in Lightroom to trim that to about 16 seconds. I made no other changes in QuickDevelop. Then I exported to a location on my hard drive, specifying "Original" in the format choice.
The file that emerged was the full 1 minute length when inserted in ProShow Gold and ran the full clip as shot.
I have looked over the video tools documentation and it seems to confirm that length is a parameter of export. Why the file that exported retained the original length?
My latest problem is file formats! I have two cameras, one of which produces .AVI video format. I have found that Corel does not "read" this format - or am I wrong? I am working from a card reader. I have succeeded in using the latter files in VS but only by converting to MP3. I don't want to part with this very handy camera so am I missing something in that perhaps I can change some setting to enable Corel to recognise .AVI files? I don't want to have to use the editing suite which came with my Traveller camera. I have found it is easy to load via Picasa - which accepts many formats - but it's when I come to insert media file to the VS library that the trouble starts - obviously because the files are .AVI.
View 2 Replies View RelatedI recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
I just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
I'm trying to use VideoStudio X2 to burn to DVD a file that I’ve downloaded to my laptop from my hard disk set top box . When I play the file in VideoStudio it's silent (whether or not I’ve added it to the timeline). However when I view the file (a .ts ) in Windows Media Player it has sound.
If I view other .ts video files in VideoStudio they do have sound, which suggests the sound for my laptop and VideoStudio aren't completely muted.I've attached a screen shot that shows the audio file properties as well as other settings.
Software: Pro X2 (VideoStudio v12.0.96.1)
Toshiba Satellite L500-1WG
Windows 7, Home Premium, 64 bit
Pentium Dual Core CPU, T4400, 2.2GHz, 4 GB RAM
Video type: PAL
I'm using Corel Videostudio Pro X5 and have been filmimg in ACVHD.MTS format this year for the first time on motorsport events, I've edited all my 2013 footage and all is looking great.and now i want to save the footage into a file on my PC to upload into Sony DVD Architect to make a quality DVD production.
I have done this routine with my SD footage for several years and had no issues at all and created some great DVDs but now i'm using HD footage i'm getting lost with all the video formats that are available.
Basically which is the best format to save my video file onto my PC before i upload it into Sony DVD Architect? I tried the first option HDV which looked great and a reasonable file size but then it started to flicker and freeze during play back on my PC.
Also, even though i've been filming in HD i still only want to make a standard DVD because i share my work with friends who do not have Bluray players, will this be an issue since i have filmed in HD all year? All i after after really is the best quality footage i can produce for my DVD.
Importing VHS tapes to VideoStudio Pro X2 produces a video file and a .upd file with the same number. As I intend to store these files on my external Seagate HDD would it be permissible to rename them to correspond to each VHS tape? At the moment I've just placed the two files in a folder and named it eg: VHSTape_1, VHSTape_2 etc. Are the .upd files really necessary?
View 3 Replies View RelatedA friend of mine shot some video with his JVC everio on 1/8/11.The native files PLAY fine in VS3 however any attempt to convert to any output video file or just output the audio track (which is what I really want to do) results in random audio "skips" like what happened when an LP had a scratch and a stylus couldn't play it.I have VS SP2 installed along with the audio patch on the Corel site.
I've successfully exported the MOD files to other formats using a freeware program called Video Pad from nchsoftware.com, so I can only assume VS has a problem.
I thought before I downloaded that MOD file converter, that's been discussed here, I would ask.Seems that a PAYware software like VS, shouldn't have this problem.Prior to using MOD files, I used AVI files in VS and exporting to an audio file worked just peachy.
I am using Premier Pro CS5.5. I want to know if I can import a .mts file and use Premier to convert it, or save the file as, a .mov, .wmv, .mp4 or other video file format?
View 5 Replies View RelatedI have added a video file to my timeline and then chosen share dvd. I then added chapters and chose a menu (tried several) and then selected Burn to folder and normalize audio but just NOTHING happens after 3% (which appears immediately) have tried different videos and menus - none get processed. The CPU runs at 100% BTW I am processing thi on my laptop Win 7 (32 bit) Toshiba with 3 GB RAM and a IGB GPU so do not go by my profile
I have a previous version of VS and that works just fine. yes I uninstalled theat entirely and then decided to try VS 14
I've been editing with no problems for a while now but every time I try to share/create a video file it fails every time at 95%. I'm assuming it must be something specific for it to fail every time at the same point and i've tried it in multiple formats but always with the same result
I have included a screenshot.
File name appears at bottom of video ?
I new to VS X5 Pro. I have a very basic question, I'm sure.... Is it possible to not have the computer file name of the video appear at the bottom of the video for the first few seconds? It does fade away but is not acceptable to be there at all. Is this a Windows 7 config issue or something in VS?
I have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies View Related