VideoStudio :: X3 Multi-trim Video 1080p Jittery?
Jan 13, 2011
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies
ADVERTISEMENT
Oct 24, 2012
I am trying out video editing for the first time and I am trying out the VideoStudio Pro X5 Ultimate.
But each time I drag a MOV file from my Phone into the program it doesn't display the video. I can hear the Audio but the picture is blank. I have Re-installed Quicktime but I still get the same problem.
View 2 Replies
View Related
Nov 27, 2011
Because i still don't have audio when loading a video in the timeline and go to projectmode. The audio is also not in the output file. It is when playing original clip in library and when in timeline choose the clip but not in project mode and output file.
Thats why i split audio and video in Virtualdub to wav (direct stream copy) and then load audio and video in VS4. Now i want to multi-trim the clip. But only the video is trimming the audio is not trimming with it so audio is off sync.How can one multi trim a video with the audio who is seperatly loaded in the audio track?
View 5 Replies
View Related
Aug 17, 2013
I've just started using VS X6 Pro, after not doing much with video for a few years. I previously used VS 10 and 9.
We have a canon P&S camera which produces HD H264 mov files which I am editing for the first time and getting a weird problem. The files play fine on the time line, but when I try to use the multi-trim tool I get two issues:
1. Audio is badly out of sync in the multi trim window, like 1/2 second in a 20sec clip. (again, same clip plays fine on the time line)
2. When I make a multiple trim, the "play trimmed video" button does not work properly. eg if I make two selections from a clip with a gap between them, play trimmed video plays the whole clip to the end, then returns to the start of the second trim selection and plays that.
If I load up an mpeg2 .avi clip, the multi-trim tool works perfectly: audio is in sync and it correctly plays only the trimmed sections.
I have enabled smart proxy on the clips, and following another hint in a thread here, I downgraded quicktime to 7.5.5 but neither worked. Also I have installed sp1.
View 2 Replies
View Related
Nov 2, 2012
One of my soap box rants is about Owners Manuals and user guides. Most are a direct translation from the Japanese or Mandarin.
The VS User Manual also is fairly useless as it glosses over the useful detail. (previous query about files used by VS) In this case the Multi Trim tool has two unexplained buttons, the Ad-Zapper and the Merge CF.
I suppose the Ad-Zapper relates to our overwhelming desire to eliminate commercial breaks. (Have you noticed how much longer they have become in recent months? At least one brew and a slice of toast before the program restarts) But what is Merge CF? And how does Ad-Zapper know what is program and what is an Ad?
View 2 Replies
View Related
Oct 4, 2011
I made the stop motion effect by the multi trim,and every time after 35-50 sec the software crash,i have to save my work every time before the vs4 crash,what should i do?
View 2 Replies
View Related
Feb 18, 2012
When I move the slider VS PRO X 4 gets an unexpected error and closes.Digging around I found the Ultimate version and tried the trial download. It worked for a while and then the application terminated again.
I reloaded X4 Pro and installed SP 1 & 2
I find confusing that the X4 Pro Build number without either SP 1 & 2 is:14.0.0.342
The Build after Sp1 is: 14.1.0.107
The Build after Sp2 is: 14.2.0.23
Then this ULTIMATE version has a build of 14.1.0.150? Looks like the same family and from the same department.
The GUI is also the same no mention of Ultimate - and the Sp's think it is another pgm?
What does the Ultimate do that the Pro X4 does NOT?
View 5 Replies
View Related
Dec 6, 2012
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
View 3 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Feb 28, 2011
I am having a problem trying to create a DVD with multiple "independent" videos. I want each one to be selectable on the main menu and to act independently of the others. When the selected video is finished, rather than going on to the next video, I wanted it to return to the introduction screen for the user to select another video or exit.
View 4 Replies
View Related
Nov 11, 2012
After upgrading from W7 to W8 only VS X5 plays .avi videos with a jitter, other software doesn't (Powerdirector, Windows Media Players etc).
View 4 Replies
View Related
Jan 19, 2013
It is taking 6 - 7 hours to render 2 - 6 minute 1080p videos down to 720p. Granted there are about 10 - 15 layers and a bunch of editing... but when I look at the performance monitor during rendering the intire resources used by my computer is around 45% - 50% for memory, processor, and little to no GPU is this normal?
It just seems really wierd to me. I have read the Adobe blog and watched the Learning Videos on the website on how to adjust the performance settings and have 90% of the RAM alocated to Photoshop.
::: PC Specs :::
Photoshop CS6 Extended 64-bitWindows 7 Ultimate 64-Bit
AMD FX 8150 Eight Core Processor16GB of RAM DDR3AMD Radion HD 4200 (I know it's old but its apparently not being used much anyway)C: Drive - 32GB OCZ2 SSD - Four of them in RAID0 (I've read that this could be a bad idea but i had them laying around and I needed more than 32GB)
Scratch Drive - 2TB older 5200rmp HDD
Rendering to and From - 1TB 7200rpm HDD
View 3 Replies
View Related
Jul 21, 2013
I was working for a while with VideoStudio ProX5 and I'm trying the demo version of VideoStudio ProX6 and I've got some issue...
First, my video files are .MOV from my Nikon D3100. 1920X1080 24FPS H.264/MPEG-4 Advanced Video Coding.
My computer: HP Laptop DV6 Intel Core i3 350M @ 2.27GHz. 8GB of memory. ATI Mobility Radeon HD 5470. On Win7 Family Premium 64bits.
So it's a car video, cars are at street speed or lower and you can clearly see the sag of the cars. I've try different output (.avi, .mp4, .mts etc... ) from custom to the one included in the program and still sag like crazy.
View 7 Replies
View Related
Mar 20, 2011
My Canon HF S21 is set to record at PF25 (i.e 25 fps PROGRESSIVE), and also I choose the highest recording quality : MXP (1920 X 1080, 24 Mbps). When I choose to save the .MTS file here`s what happens :
1. Choosing H.264-MAIN in the Compression tab, the video data rate is limited to 20000 KBps.
2. To have 25 fps (that is, PAL) AND progressive playback, my only choice is to output a file at 1280 X 720. If I choose 1920 X 1080 , AND Frame-based, the Frame Rate drop-down menu becomes greyed out at 30 fps ! Of course, at the Corel VideoStudio tab, I have unticked the "Perform non-sqare pixel rendering", because the source video is made of raster (i.e square) pixels, unlike the HDV 1440 X 1080 recordings.
3. Choosing MPEG-4 HD, the Properties of the video file to be rendered appear as follows :
24bits, 1920 X 1080, 30fps
Frame Based
H.264 Main Profile video, 15000 Kbps
32000 Hz, 16bit, stereo
MPEG AAC Audio, 128Kbps
4. No luck either if I choose Blu ray > PAL H.264 (1920 X1080). The "improvement" appears to be the VBRof 22700 Kbps, but VideoStudio insists on rendering interlaced (Upper Field first) out of my progressive video. The same rendering settings appear if I choose AVCHD > PAL HD-1920. I shall try the Template Manager and see if I can convince VS NOT to alter in any way the quality of the source clip. Meanwhile, I am very interested to read about your experiences with 1080p.
View 6 Replies
View Related
Dec 30, 2012
I want to "remaster" my old travel movies (made with Ulead then) to VSX5 Bluray movies. I still have the old VSP file ; the photos taken with an old camera then had high enough resolution but my videos were at 240 lines then. I know that VSX5 upscales automatically to Bluray at rendering phase but what is the best way to enhance my videos to 1080 ; if done prior to rendering, will it yield a better quality movie (and if so, how do I do that ?) or do I have to leave it to VSX5 rendering phase as the only/best process . My 240 videos look ok at 240 but are currently "pixelly" when I view them on my current hdmi PC monitor at native 1080 ?
View 5 Replies
View Related
Jan 3, 2013
I use a SLR to capture video and do this at Full HD @ 50 fps. It's crucial that I keep this quality throughout the project.
But I have not been able to find ANY export option/file format that exports at 1080p/50fps! Is it really possible that VS X5 does not support this?
View 2 Replies
View Related
Nov 13, 2012
I have VS Pro X5. My footage is shot at 1920 x 1080p with 25 fps and I would like to produce mpeg4 video file with same parameters. I select custom settings, mpeg-4, H.264 high, frame size 1920 x 1080, but then fps is set to 30 and it is greyed out. Is this the limitation of VS? Is there any way to produce high quality HD with 25 fps?
View 6 Replies
View Related
Jul 3, 2013
I currently have X5 and am wanting to burn my 1080P footage to a blu ray disc. However the settings when I select 'create disc' only allow upper or lower field, and not frame based. Does X6 have the capability to create a disc at 1080P, is it worth purchasing? Or does it even matter if I output to upper field first (quality-wise)?
View 2 Replies
View Related
Nov 15, 2010
When outputting as an MP4 file, the result is SO ugly, it almost completely destroys any fine detail in the image, and the sound is total garbage (it sounds like a 22k 64kbps mp3, just utter crap), so MP4 is just not an option for me.
Unfortunately, as it has been brought to my attention, Corel doesn't seem to truly support 60fps, even though most new cameras film in 60fps--so when I use the modes that are supposed to be for 60fps, it flipflops back and forth between 30fps and 60fps. I just want an output that's consistent, not this flipflopping garbage. There's ONE mode I can use, AVCHD, that gives me a consistent framerate AS LONG AS I don't put any titles up, and as long as none of the source material is of a resolution different from the main--otherwise it will look like a glitched mess.
Since they've crippled being able to adjust the project properties outside anything DVD quality, I can't really adjust anything.
Is there an output mode that will give me a consistent 30fps that supports 1080p?
View 2 Replies
View Related
May 13, 2012
When I render 18 minute ProX5 project to movie file WMV at 1080p it comes out with incorrect aspect ratio, everything is elongated vertically.
I am using a Canon Vix HFS20 camera.
View 8 Replies
View Related
Jul 7, 2012
I have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
View 9 Replies
View Related
Aug 5, 2013
Using LR4.4 on Windows7 64-bit Pro, and I am new to video. I shot a 1 minute segment and used the tools in Lightroom to trim that to about 16 seconds. I made no other changes in QuickDevelop. Then I exported to a location on my hard drive, specifying "Original" in the format choice.
The file that emerged was the full 1 minute length when inserted in ProShow Gold and ran the full clip as shot.
I have looked over the video tools documentation and it seems to confirm that length is a parameter of export. Why the file that exported retained the original length?
View 4 Replies
View Related
Mar 25, 2014
I want to film my CEO standing on London Bridge as people walk over it. The trick is is that I want to film him at normal speed (for obvious reasons), and i want the people walking past us to be shown at double the speed.
Having thought logically I guess I need to film people walking over the bridge separately from filming my CEO, then somehow superimpose him on the that footage.
View 4 Replies
View Related
Jan 15, 2013
Version in use - X5 Pro Ultimate.This is about trim handles that seem to re-locate - from a clip to a whole project - for no obvious reason, and once it occurs the only fix is a program restart.
I have noted when working on projects that periodically the clip trim handles - those orange icons that sit at the end of the white clip strip timeline that appears in the view panel when clip mode is selected - will re-locate from the clip view to the project view. That is, they no appear in clip mode, but reappear when project mode is selected; and they then operate on the whole project. That's a trap - the first time it happened and I was trimming a clip, it trimmed the whole project. Ruined it completely, start again was the order of the day. Now, I keep an eye on that: when it happens there isn't an obvious way to get the handles back to the clip view, and the only option then is to NOT do any further changes, save the vsp and close VS down. Re-opening VS and re-loading the vsp breaks whatever condition caused the relocation of the trim handles, and gets back to condition where the trim handles being displayed in the clip view, and trimming of a clip can be done without damaging the whole project.
View 6 Replies
View Related
Nov 30, 2011
I have been trying for an hour to clip a few frames off the beginning of a video & save. I want to keep everythis as-is. Just trim & save. Everything I try requires recompiling & I loose a generation of quality. When I use "Save Trimmed Video" I get an error that says "Unable to get samples.(osErr=-9461)".
I just want to trim & save.
View 9 Replies
View Related
Mar 8, 2012
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies
View Related
Jun 12, 2011
1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
View 4 Replies
View Related
Jan 5, 2013
I shoot vacation video with out tripod and at the beginning of each clip, I have shaky video because of pressing the record button.Same apply to end of the clip when I stop the recording.
How can I trim beginning and end of the clip for first one second length?
I have Video Studio X5 and the video format is AVCHD (Canon HF S200).
View 4 Replies
View Related
Feb 22, 2012
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
View 6 Replies
View Related
Jan 22, 2014
How would I go about to fix this "jittery" brush in gimp? [URL] ......
This is simply a 1 pixel paintbrush with the normal brush (circular one with a little bit of smoothing).
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
