VideoStudio :: Simple Trim / Split 3 Seconds Limitation?
Feb 22, 2012
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
View 6 Replies
ADVERTISEMENT
Nov 30, 2011
I have been trying for an hour to clip a few frames off the beginning of a video & save. I want to keep everythis as-is. Just trim & save. Everything I try requires recompiling & I loose a generation of quality. When I use "Save Trimmed Video" I get an error that says "Unable to get samples.(osErr=-9461)".
I just want to trim & save.
View 9 Replies
View Related
May 14, 2013
if i draw up a 3d sold part as the finished part, can i then draw a new rectangle solid body over the top of this and split the new solid body using the part as the split tool?
the idea being that i am left with a rectangular plate with a female 3d impression of the finished part in the top.I can't seem to use the part as a split tool?
View 5 Replies
View Related
Feb 14, 2011
When I use the timeline everything goes from 00:00sec to 00:24sec then it gabs to 01:00 and so on.... Why is that and can I change it to use 60sec instead?
View 2 Replies
View Related
May 21, 2012
My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
View 4 Replies
View Related
Dec 22, 2011
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
View 1 Replies
View Related
Dec 4, 2011
I found where I can make a video backdrop for a DVD menu, but the limit appears to be 30 seconds. This is not the case in other programs. Is there a workaround?
View 7 Replies
View Related
Mar 6, 2012
Is there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies
View Related
Jul 8, 2011
I'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
View 1 Replies
View Related
Jul 21, 2012
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
View 14 Replies
View Related
Aug 19, 2012
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
View 4 Replies
View Related
Nov 7, 2011
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
View 4 Replies
View Related
May 28, 2012
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
View 9 Replies
View Related
Dec 31, 2010
I have created a slide show by Inserting Media file to Timeline, Insert Photos. I then Share, and then Create Video File. This is a great product, so easy. However I noticed that the time delay on each picture frame is about 3 seconds. I have manually increased each slide to 5 seconds using the slider on the timeline. But this is cumbersome. Is there a place to change this default 3 seconds to what I want in the software? I cannot find it.
View 3 Replies
View Related
Nov 27, 2011
Because i still don't have audio when loading a video in the timeline and go to projectmode. The audio is also not in the output file. It is when playing original clip in library and when in timeline choose the clip but not in project mode and output file.
Thats why i split audio and video in Virtualdub to wav (direct stream copy) and then load audio and video in VS4. Now i want to multi-trim the clip. But only the video is trimming the audio is not trimming with it so audio is off sync.How can one multi trim a video with the audio who is seperatly loaded in the audio track?
View 5 Replies
View Related
Jan 15, 2013
Version in use - X5 Pro Ultimate.This is about trim handles that seem to re-locate - from a clip to a whole project - for no obvious reason, and once it occurs the only fix is a program restart.
I have noted when working on projects that periodically the clip trim handles - those orange icons that sit at the end of the white clip strip timeline that appears in the view panel when clip mode is selected - will re-locate from the clip view to the project view. That is, they no appear in clip mode, but reappear when project mode is selected; and they then operate on the whole project. That's a trap - the first time it happened and I was trimming a clip, it trimmed the whole project. Ruined it completely, start again was the order of the day. Now, I keep an eye on that: when it happens there isn't an obvious way to get the handles back to the clip view, and the only option then is to NOT do any further changes, save the vsp and close VS down. Re-opening VS and re-loading the vsp breaks whatever condition caused the relocation of the trim handles, and gets back to condition where the trim handles being displayed in the clip view, and trimming of a clip can be done without damaging the whole project.
View 6 Replies
View Related
Mar 8, 2012
I recently upgraded my Corel VideoStudio X2 to Corel VideoStudio x4 Pro. After removing the old program and installing the updated version,I then restarted my computer and attempted to use it to edit a video. I placed the youtube video that I'd converted to AVI format into the timeline on the program. I then proceeded to attempt to trim <cut> the video at the first place that needed to be fixed and also at the end of the area to be repaired. After fixing it,I then reset the video to the beginning and watched for the expected changes. Much to my surprise,there was audio all way to the first cut spot on the video and absolutely nothing for the entire rest of the video;even in the cut or changed area. I was naturally puzzled as I never had this issue with the previous version. I then checked all my system audio controls and those of the program to make sure that nothing had changed or been accidently muted;including all audio settings were at proper levels,and everything was on and working as should be. I then checked the device manager to see if I found any yellow "?" marks on it for some strange reason to insure that all drivers were installed correctly;and found nothing amiss there. I then went to youtube and played a video and then a music CD in my computer to insure that my audio system was still functioning correctly and,as expected,they both worked fine and gave me audio output. Puzzled,I closed out the VideoStudio and all programs and re-started my computer. I then re-opened VideoStudio and tried again. I placed the same video on the timeline and played it without any changes. It played perfectly fine and I had audio thru-out the entire video. I then re-tried to adjust the video by clipping it and once again...no sound for the rest of the video. I re-checked all drivers and audio connections without finding anything amiss. I even tried other videos that I'd converted to AVI format in the program timeline,that I still had on computer with the same exact results after picking a spot and clipping them as before.....no audio. I even tried clipping the video in different spots;both by clicking on the scissors and with the editing options located in the program interface with the exact same results...no audio after the cut. I searched thru the program interface. I enjoyed the previous version immensly so was looking forward to using the updated version;but can't unless I can get this problem reesolved. Worse case,I can go back to the old version that worked fine for me but I hope not to.
View 2 Replies
View Related
Aug 17, 2013
I've just started using VS X6 Pro, after not doing much with video for a few years. I previously used VS 10 and 9.
We have a canon P&S camera which produces HD H264 mov files which I am editing for the first time and getting a weird problem. The files play fine on the time line, but when I try to use the multi-trim tool I get two issues:
1. Audio is badly out of sync in the multi trim window, like 1/2 second in a 20sec clip. (again, same clip plays fine on the time line)
2. When I make a multiple trim, the "play trimmed video" button does not work properly. eg if I make two selections from a clip with a gap between them, play trimmed video plays the whole clip to the end, then returns to the start of the second trim selection and plays that.
If I load up an mpeg2 .avi clip, the multi-trim tool works perfectly: audio is in sync and it correctly plays only the trimmed sections.
I have enabled smart proxy on the clips, and following another hint in a thread here, I downgraded quicktime to 7.5.5 but neither worked. Also I have installed sp1.
View 2 Replies
View Related
May 28, 2013
I have been using VS for quite some time, along with my Panasonic GS500. When capturing my video, VS would create a file for every start /stop of the video. I shoot high school football. This is extremely convenient for cataloging plays, because each play is its own file. I know that "Split by Scene" is available, but it does not create a file for each play.I recently purchased a Canon XH-A1s and wanted to move to HD. will the new Canon camera and VS Pro X4 provide for the same type of capture, when optioned for HD.
View 4 Replies
View Related
Oct 14, 2012
I am using VS Pro X4 on a Windows XP Pro PC. When I 'capture' video from by vidcam (DV tapes) using 'split by scene' all the resulting clips all contain the first frame of the following clip.
I had this problem a year ago using my laptop on a VIsta Business platform and though that perhaps the 'problem' had something to do with Vista (well Vista isn't everyone's ideal platform) but now I am experiencing it on an XP PC so I am thinking that it is caused by VS Pro X4.
Is there a fix for this and/or a setting to stop this annoying problem. I am thinking that if No then I should reinstall VS 9, which I never had this problem with, just to allow me to capture video by scene correctly.
View 6 Replies
View Related
Nov 4, 2010
Using VS Pro X3. Is there a way to split by time (vs. by scene/content)?
View 7 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Jun 12, 2011
1.I am using the latest version of videostudio which I upgraded today today June 11, 2011.
2.I am using a Sanyo Video Camcorder PD2, which I am recording in 1280 x 720 29.97 frames per second.
3.I’ve imported the video, into the program, and I am simply trying to “join” the video by using step three that is “Share.”
4.I am clicking option “create video file” and then the option “same as first video clip” because I would like to preserve the same video settings. There are other ways I could join the clips, but these ways do not preserve the video settings. So when I choose “same as first video clip I get my error message “The frame size of the video (1280 x 720) does not match the settings and therefore cannot be trimmed.’
View 4 Replies
View Related
Dec 6, 2012
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
View 3 Replies
View Related
Jan 5, 2013
I shoot vacation video with out tripod and at the beginning of each clip, I have shaky video because of pressing the record button.Same apply to end of the clip when I stop the recording.
How can I trim beginning and end of the clip for first one second length?
I have Video Studio X5 and the video format is AVCHD (Canon HF S200).
View 4 Replies
View Related
Oct 28, 2013
After spiting the audio form a DVD in X5, I want to make a CD of the audio (narration) .What is the best way to do ?
View 5 Replies
View Related
Dec 31, 2010
I have used my Video Studio Pro X3 to creat a few videos. When I now try to creat a video the split by scene buttion is greyed out. I dont think I have done anything with the settings on my Camera a Sony HDR CX7EK. I record in standard definition and the file created has an extension .mpg with 720x576, 25 frames per second. The only difference this time around is that I took the memory card from the camera and transfered it to the computer with a reader instead of using the sony transfer and charging docking station. Strange is that I can also not split by second when using old projects where I could split scnenes some 6 months ago.
I also did read in a few other posts the button is greyed out if you record in analog cameras, which is understandable, but to my dissmay it seems like splitting by scene does not work on HD recorded files, is that true as i have used the HD function in the camera and created AVCHD files with file extension .MTS and plan to creat a few movies later on?
View 2 Replies
View Related
Nov 27, 2012
I'm using Corel Video Studio Pro x4 to make a promotional video for an upcoming event, and I used the split audio function to, surprise, separate the audio. Here's the problem: It has no sound. When I play it as a clip, it works fine. But if I play the project as a whole or add any kind of filter to it, it is mute. I've tried saving the project and opening it in a media player, still nothing. My music track and video track play fine, but the split audio does not.
View 7 Replies
View Related
Nov 5, 2010
I have my editing all done for a 2 hour 12 minute video. It has been my experience that I can get about 1hr 7min. on a DVD. Normally when i'm done editing, I choose Share > Create Video File > DVD. This creates a DVD compatable mpeg-2 file for burning later. I know I want to create 2 seperate DVD's. How do I split the video? Is it possble to slpit in the editing phase? I'm using VS pro 12.
View 3 Replies
View Related
Jan 13, 2011
I use VSX3 to edit down .mov files created with a contour HD helmet camera. I have been using a 720p version of the helmet camera and have had no issues with editing (other than the ocasional C++ runtime errors and the VSX3 program crashing randomly which just seems to be a Corel programming issue) Recently I got to use a 1080p contour HD helmet camera and have problems editing the files in VSX3. In the preview window in the edit screen the 1080p file plays fine. But when I try to trim the file down using the "multi-trim video" function the file is very jittery, takes a long time to load and the sound is in and out, almost like the program can't handle a 1080p file for editing. The "mult-trim video" works fine for the 720p videos.
View 1 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
