VideoStudio :: Audio Missing Alternate 1/2 Seconds After Editing?
Jul 21, 2012
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
View 14 Replies
ADVERTISEMENT
Jul 8, 2011
I'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
View 1 Replies
View Related
Jun 1, 2013
When I long click to select an alternate tool, the flyout freezes for a few seconds before I can select a tool.
How can I fix this? My only work around right now is to know the tool shortcut and then to cycle through it with shift+tool shortcut.
View 6 Replies
View Related
Jan 1, 2012
I had been given Ulead VS 9 and 10 from a friend who upgraded to X4. Having used and liked those, I tried his X4 and then downloded the trial version for myself. VS X4 is the only consumer program I can find that has audio mixing on playback, so I'm trying to do what I can to be certain that I'm getting a good product.
I make heavy use of multi-trim, speed/time lapse and audio level editing. I leave audio to the last. Due to camera changes, I began with AVI files, but now am using MPEG2, 4:3 740X480 29.97 fps with audio of 48000hz and a bit rate of 256 kbps.
I can edit project files for as long as I want to sit here doing it. Trimming, speeding up and adding as many transitions as I like within a 30 minute project. The preview playback will get a little choppy and often the audio will go out of sync, but if I close the program and re-open it, those problems will usually be corrected. Regardless of whether or not I close and re-open the program, when I begin adding soundtracks and adjust the levels, the program will inevitably pop up an error window and shut down.
I have tried doing all of the video editing and transitions, then creating a single file via "Share", closing the program, re-opening, starting a new project and bringing the new file into the timeline thinking that it wouldn't have to "remember" all the previous editing. From there I would attempt to do audio, but I get the same sesult.
I have uninstalled both all VS programs, removed all remaining folders, and re-downloaded the trial without re-installing 9 and 10. I can still open the vsp files saved in other folders, and I can still edit the video portions, but the program freezes when attempting to edit audio.
I did not have any issues with 9 or 10 until the download of X4. After x4 failed, I went back to 10, which worked for about 3 projects and then failed in the same manner, hence my reasoning for unistalling all programs.
It's almost as though this program makes a folder specifically for edit memory, and when it's full, it's full, and you don't get to edit anymore. Neither can you empty the folder. I've tried the different disc caching and acceleration options given in the manual, but nothing makes any difference.
I have several videos posted on YouTube, all of which were created with VS 9, 10 and a couple with X4. I would prefer to continue using a program that allows audion mix "on the fly". But now I can't even complete a project in VS10.
For a sample of my postings on YT go here: [URL]
It's a half hour long, but shows the extensive amount of editing done to make the final product.
View 8 Replies
View Related
Dec 29, 2010
I am using VS 10 and I have successfully captured all the video needed for this project (DV format). My project is an interview where I used 2 cameras during the recording session. On one camera I used a microphone and I want to use that audio throughout the project for consistency. At the beginning of the session I recorded a timer from my laptop screen to better sync the video during editing.
I placed one camera video on the video track and the other on the overlay #1 track. I moved the overlay clip so it matched the frame of the timer on the video track. The 2 tracks synched up perfectly. How to cut back and forth from the second camera. I extracted the video track audio to the audio track thinking I could just cut the video track and the overlay track and slide the overlay track up to the video track. But, it won’t let me cut the overlay track. By the way, while not an expert,I am also not a first time user with the software as I have made a number of projects over the years.
View 8 Replies
View Related
Aug 18, 2011
Describe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.
What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.
Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo
Project Settings: As the software was shipped. I haven't changed any settings.
NTSC
Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO
Error Codes NONE
View 14 Replies
View Related
Dec 9, 2010
I worked about 4 hours last night on a 13 minute video in ProX3. Before starting I uploaded patch from link that popped up when I opened ProX3. When all done editing, I "shared" it to YouTube via ProX3. This morning when I checked YouTube I found the video audio is corrupt meaning where I had it muted, in some clips it now has scratchy "heart beat" sounding video audio and in some places no video audio where I wanted it, whaaaa. I went back to the original .VSP file to see what was wrong, but the video audio looks good in the wave data.
View 14 Replies
View Related
Jan 2, 2010
I recently upgraded from VS9 to X2. When I "Create Video File," the audio format options I have are:
PCM
IMA ADPCM
CCITT A-Law
CCITT u-Law
GSM 6.10
Microsoft ADPCM
I seem to recall having more options than this with VS9, but I'm not sure if it's a VS issue or something that needs to be installed on my computer. I also have a new computer, so I don't have all the codecs and audio encoders that I had previously collected over time on my old computer. For example, I used to encode videos for youtube using Xvid. I always had the option for mp3 audio. Now, I only have the above options. I don't even know what most of those are.
Are there some plug-ins that I need to install?
Also, is there a manual that I can download somewhere? I didn't see anything in the install folder, the support area of Corel's site
View 14 Replies
View Related
Mar 21, 2012
I just downloaded the trial version of this software (Video Studio X5 Pro) to try it before I buy it. I am importing RAW and AVI footage capture from a program called DXtory. I am recording those videos with three audio tracks, one track covers the sound of the video game being played, one track covers my microphone input, and the last track covers the sound that comes through my teamspeak server.
When I import a video into Corel am I able to separately edit each audio track? IE change the volume of one input but not the other?
View 3 Replies
View Related
Jan 2, 2012
I have used VideoStudio 11 happily for some time now but when I recently captured a HDV video in the DV format I found that the audio in some of the sequences plays back normally BUT some does not play back at all or only at a very very low level. The audio on the original tape is fine and I can see the audio waveform on the sequences that don't play back.
View 1 Replies
View Related
Jun 1, 2011
I am a user of Video Studio X2. I am having problems seeing video. When I open a project, it appears to open normally but when I play it, no video shows, just the sound. If I insert a video file onto the timeline, I get a message which says "Unable to open file" Below that is says "Catastrophic Failure" and in the lower left of the message it has the number [17101:70:2]. The exact same file will open and play normally in other players such as Windows Media Player.
View 14 Replies
View Related
Jan 29, 2014
I'm doing' music and animation, but I want to place markers every few seconds, or consistently to the bpm. It would save me a WHOLE not lot, but ton, of time.
View 2 Replies
View Related
Mar 20, 2013
I imported my files from Premiere Pro CS6. I rendered in Premiere Pro prior to importing it to AE.
View 1 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Feb 14, 2011
When I use the timeline everything goes from 00:00sec to 00:24sec then it gabs to 01:00 and so on.... Why is that and can I change it to use 60sec instead?
View 2 Replies
View Related
May 21, 2012
My video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
View 4 Replies
View Related
Dec 22, 2011
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
View 1 Replies
View Related
Dec 4, 2011
I found where I can make a video backdrop for a DVD menu, but the limit appears to be 30 seconds. This is not the case in other programs. Is there a workaround?
View 7 Replies
View Related
Mar 6, 2012
Is there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies
View Related
Feb 22, 2012
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
View 6 Replies
View Related
Aug 19, 2012
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
View 4 Replies
View Related
Nov 7, 2011
I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
View 4 Replies
View Related
May 28, 2012
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
View 9 Replies
View Related
Dec 31, 2010
I have created a slide show by Inserting Media file to Timeline, Insert Photos. I then Share, and then Create Video File. This is a great product, so easy. However I noticed that the time delay on each picture frame is about 3 seconds. I have manually increased each slide to 5 seconds using the slider on the timeline. But this is cumbersome. Is there a place to change this default 3 seconds to what I want in the software? I cannot find it.
View 3 Replies
View Related
Dec 9, 2013
I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
View 1 Replies
View Related
Mar 14, 2014
I have a timeline of about 40 minutes long with several audio tracks and sounds, some mp3 from you tube and some recorded on the shooting day. everything sound just fine in premiere, I even exported one part of the timeline as a seperate movie and it was o.k. the problem is when I've import the hole track some of the audio tracks were missing/silent. it happend in 2 different projects.
I'm on windows 7 premiere cc update to latest version...
View 4 Replies
View Related
Nov 16, 2012
While editing a large video file (one hour), the audio playback worked for a while, but then simply stopped working. Can still see video and edit it, but without hearing the words / background, editing will not be correct. Is there a bug in the software or some way of reseting the file? I have noticed a similar issue with videos in LR4.
View 2 Replies
View Related
Feb 13, 2013
Is it possible to edit and play sound from a video clip and Audio sound track in a Slide show?
View 1 Replies
View Related
Feb 6, 2014
i want to render my Premiere CC (v7.2.1) project to an .mp4 file. But some audio channels are not audible in the export. They are audible when I preview the timeline, but gone after export. Some audio channels are present, but others are not.
This is a huge problem for me, since I need to finish this project. The problem appears to have started after I moved the project files over to other storage.
View 3 Replies
View Related
Nov 5, 2011
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
View 3 Replies
View Related
Dec 10, 2010
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
View 2 Replies
View Related
