VideoStudio :: Audio Missing Or Corrupt
Dec 9, 2010
I worked about 4 hours last night on a 13 minute video in ProX3. Before starting I uploaded patch from link that popped up when I opened ProX3. When all done editing, I "shared" it to YouTube via ProX3. This morning when I checked YouTube I found the video audio is corrupt meaning where I had it muted, in some clips it now has scratchy "heart beat" sounding video audio and in some places no video audio where I wanted it, whaaaa. I went back to the original .VSP file to see what was wrong, but the video audio looks good in the wave data.
View 14 Replies
ADVERTISEMENT
Jan 2, 2010
I recently upgraded from VS9 to X2. When I "Create Video File," the audio format options I have are:
PCM
IMA ADPCM
CCITT A-Law
CCITT u-Law
GSM 6.10
Microsoft ADPCM
I seem to recall having more options than this with VS9, but I'm not sure if it's a VS issue or something that needs to be installed on my computer. I also have a new computer, so I don't have all the codecs and audio encoders that I had previously collected over time on my old computer. For example, I used to encode videos for youtube using Xvid. I always had the option for mp3 audio. Now, I only have the above options. I don't even know what most of those are.
Are there some plug-ins that I need to install?
Also, is there a manual that I can download somewhere? I didn't see anything in the install folder, the support area of Corel's site
View 14 Replies
View Related
Jan 2, 2012
I have used VideoStudio 11 happily for some time now but when I recently captured a HDV video in the DV format I found that the audio in some of the sequences plays back normally BUT some does not play back at all or only at a very very low level. The audio on the original tape is fine and I can see the audio waveform on the sequences that don't play back.
View 1 Replies
View Related
Jun 1, 2011
I am a user of Video Studio X2. I am having problems seeing video. When I open a project, it appears to open normally but when I play it, no video shows, just the sound. If I insert a video file onto the timeline, I get a message which says "Unable to open file" Below that is says "Catastrophic Failure" and in the lower left of the message it has the number [17101:70:2]. The exact same file will open and play normally in other players such as Windows Media Player.
View 14 Replies
View Related
Jul 21, 2012
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
View 14 Replies
View Related
Oct 16, 2008
I'm using PHotoshop starter 3.0. In this I have tumbnails of my photos. However, due to a problem on my computer my family pics were lost. I was able to recover some using a photo recovery program. HOwever, there are many missing/corrupt photos. These thumbnails are still in photoshop. Is there a way I can work with or print the tumbnails -- even if its a lousy picture atleast I won't loose the memory.
View 2 Replies
View Related
Apr 10, 2013
I just got a new laptop, it's totally clean.
Installed F-secure and made exceptions rules for all Autodesk related stuff
Installed Office-package.
Downloaded and installed Autocad LT 2014, no problems detected but when I start I get this error message.
I got less then 2 hours to fix this and a few other things I havn't gotten to yet and I need this laptop up and running tomorrow for a seminar.
"A display driver file (.HDI) is missing or has been corrupted. The program will be closed."
This problem may be caused by missing .hdi files in the following location: "Autodesk>Autocad LT 2014>Drv>
I can't find the specified file under the folder so I'm guessing it is missing, any quick fixes for this?
AutoCad LT 2014
View 9 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
Aug 8, 2012
After apparently successfully capturing dv from Sony Cam (V1P) and Panasonic NVGS400 via firewire, I get message 'capture failed, corrupt files'. This happens with VS4 and VS5 both of which are installed on this computer. Settings are lower field first, dv1. All patches are installed.
View 12 Replies
View Related
Oct 14, 2011
when I try to import footage from camcorder as an AV file I'm getting message, 'Capturing failed. The file is corrupted and unusable. It will be automatically deleted'.The only recent change I've made to my laptop is renewing my Panda security.
View 6 Replies
View Related
Sep 2, 2012
I've recently updated one of my PC's. I tried to launch VS x5 and I received a "corrupt file message" with error code 38. I've read all of the previous threads here and others online referring to Protexis Licensing V2 in the Services tab. I've un-installed, reinstalled several times. Would be nice is a "Repair" option was available. I've entered the serial numbers, several times, made it to the "Register Product" page but can never get the program to start. This was an update from VS 4 and I've entered the serial number for that when prompted. I have the program working just fine on another completely new system. Both are running Windows 7.
View 1 Replies
View Related
Mar 14, 2014
I have a timeline of about 40 minutes long with several audio tracks and sounds, some mp3 from you tube and some recorded on the shooting day. everything sound just fine in premiere, I even exported one part of the timeline as a seperate movie and it was o.k. the problem is when I've import the hole track some of the audio tracks were missing/silent. it happend in 2 different projects.
I'm on windows 7 premiere cc update to latest version...
View 4 Replies
View Related
Feb 6, 2014
i want to render my Premiere CC (v7.2.1) project to an .mp4 file. But some audio channels are not audible in the export. They are audible when I preview the timeline, but gone after export. Some audio channels are present, but others are not.
This is a huge problem for me, since I need to finish this project. The problem appears to have started after I moved the project files over to other storage.
View 3 Replies
View Related
Nov 5, 2011
I have on .avi video file from friend, that I can play OK with sound in VLan player, I just installed X3 and tried to make DVD from it and got it without sound, same thing if I play this loaded .avi in X3, don't have any sound ? Is there any secret encoding I have to look for ? Somebody told me that X3 will eat any format.
I"m running W7 with trial X3?
View 3 Replies
View Related
Dec 10, 2010
I am having a problem with way slow audio in Ulead Videostudio 11.5 plus. I know it's an older version, but the format is similar or the same for some of the programs and maybe someone else has had that issue on even a new software version.
I managed to make some music videos with the software, after going to Youtube, as the manual for the software really isn't that great in all honesty. it simply doesn't tell you much detail on doing things. Putting in a music track to the video clips and then turning the sound on each clip all the way down wasn't a problem, but now that I want to do a normal video-I'm finding the sound in the virtual clip or whatever(which I recorded into my digital camera-mov. files), plays like Jabba the Hut off Starwars!
What do I do here to make it sound normal and be able to edit properly and share it in normal sound?I tried splitting the audio and then it sounded normal, BUT it still had that nasty slow sound on the audio. No matter if you mute it or pull the sound down in the video/audio clips in editing. How do I get rid of that slow sound or change it to make it right? Do I even need to split audio there?
View 2 Replies
View Related
Dec 13, 2010
So I go to edit some video and now all of a sudden there is no sound/audio playback in any of my clips. The files are fine. They play fine in other software, and in other editing software as well. But this is the my software of preference and I can't use it. WHAT THE HELL HAPPENED. The same thing has also happened to my DVD Workshop 2 software. And the same thing happened to at least 3 previous versions of VideoStudio. Everything works great and then one day BAM, no audio. The data is there because if I go ahead and render it again and play the new file on something else the audio is still there. So the problem is only on Corel/Ulead products. As a matter of fact I just downloaded the VS X3 demo. I cannot find anything about it online anywhere. If I cannot figure this out I am NEVER going to buy another Corel/Ulead product again. And I am a longtime user, way back to version 3 or 4. And for some idiotic reason I keep buying the new versions.
View 1 Replies
View Related
Jun 3, 2012
No Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies
View Related
Dec 16, 2010
Slideshow Creation: I'd like to make a slideshow DVD for Xmas to give out. I've made a lot of movies with VS but never a slide show and in fact i've never created a slideshow in any program.
Is this possible in VS10 or would it be better to use DVDLab Pro for this? If VS10 is sufficient to do this (just a fairly basic slideshow NOT HD). I really can't grasp it from the Manual since it really isn't covered in detail there (or did i miss it?) I'm looking to see what types of photos/graphics files and what resolution as well as a HOW TO. I'm clueless about slideshow creation.
Audio DVD Creation:
I do seem to recall that i did this once in VS10 - or was this a dream? Is there any tutorial on this as well?
View 4 Replies
View Related
Jun 8, 2011
When using the audio fade in and out to activate the fade should the bars be highlighted or dimmed? I don't seem to hear any difference between them. (Vid pro x4)
View 2 Replies
View Related
Jul 17, 2012
I got a new camera that outputs .avi files, and put together a video. When I click an individual clip in the timeline and play it, the audio plays... however, when I play the project, the audio does not play. It also does not play when I render it.
View 6 Replies
View Related
Apr 13, 2013
Moved Videostudio X4 from a Win 7 machine to a new Win 8 PC.
Again it seems, audio plays fine when playing a clip from the preview window but not when playing on the timeline. (I had a similar problem with X10 and reported it in an older thread.)
Am searching now for more patches (and yes, I'm aware X6 is now the current version) but nothing obvious at the moment. Have found the SP 1/2/3 downloads on Corel's pages, but as it already upgraded to SP3 just after install, I'm guessing SP 1 and 2 are already covered..
View 1 Replies
View Related
Nov 10, 2012
I have VideoStudio X5 Pro. Trying to add voice over using a mike. Problem I am having is the volume. On playback I can barely hear my voice. Have raise the volume level in X5 to the max, still have the issue.
View 1 Replies
View Related
Jan 4, 2011
My PC got a virus and I had to reinstall VideoStudio 11 afterwards.
For the first time since, I've burned a multi-chapter DVD and when I play it there is no audio on Chapters 2-4 but it sounds fine on the menu music and the first chapter. Each chapter is an AVI and plays fine in VS and then in the menu preview.
I've reinstalled the software a couple of times and tried a different DVD+R but still no audio on half of the disc.
View 1 Replies
View Related
Mar 4, 2012
Can I record audio from a mic with pro x4
View 4 Replies
View Related
Feb 9, 2012
I have been using VS11+ for a few years, and have never run across this problem until now. I am trying to import DVDs recorded on a specific machine and am getting video but no audio. There is audio on the DVDs. I have tried importing both as mpg and as avi (in project properties) but neither works. Although I've been using VS, I am self-taught and not very knowledgeable about codecs, recoding, etc. I mainly use VS for importing video from DVDs, editing, rendering and burning onto DVDs. I am not certain of the make/model of the DVD recorder, but I do know it is new. (I did a keyword search for "import DVD no audio" before posting, but it returned over 2,000 results).
View 6 Replies
View Related
Apr 3, 2013
I used to work in MediaStudio Pro which I really like it because it is very user friendly, then suddenly Corel killed them all by buying them, and never continue that wonderful program.How to edit the audio on the timeline? What I mean is, in MediaStudio Pro, from the Audio in Timeline, I can raise the audio up, then few minutes, low it down, then few seconds later, raise up again etc...From what I see right now on X6, for audio I can only either use the Audio filter to low down or to raise up the whole clip but not, raise up or low down at at any part that I want to.
View 3 Replies
View Related
Sep 30, 2013
In my current project, after spliting the audio from a certain clip, the Audio Filter buttom is greyed even the audio clip is marked, so I can't use it. It doesn't happen to me in previous projects.
View 1 Replies
View Related
Nov 2, 2010
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies
View Related
Jul 12, 2011
I add a video to the timeline video track (not the overlay track), and with 'clip' selected and playing... I have audio just fine, for the most part... sometimes the audio jumps and skips, and sounds garbled. With 'project' selected and the video playing, either the same thing happens as the 'clip' or there is no audio at all.
What I have discovered, is that this is common with AVI files. Other files, such as WMV, don't seem to have this problem. It affects only AVI files. The video plays just fine in WMP and VLC, as well as other video editors such as PowerDirector... so why dos VideoStudio have this odd sound issue? And I'm sure as Hell not gonna convert all my videos to WMV just to edit them.
This is on a fresh install of VideoStudio Pro X4 (as well as Windows), no updates, no Service Packs, no nothing... even WITH SP1 it's still does it. I've also removed and reinstalled my codec packs (from K-Lite to Shark007) with no difference.
I've also hear that people are now having this issue with VS Pro X3 as well (I have X3 to) so I assume it's pointless to install X3 as well. I really do NOT like using any editing software other than X4, since it's the best one I've used... so I do not want a reason to use something else.
View 5 Replies
View Related
Jul 16, 2008
I've recently upgraded the PC and re-installed VS10 onto the new, improved, beast in front of me now, but have hit a hurdle.
Whether I'm looking at an imported project or starting a new one from scratch, I seem not to be able to get the audio tracks to play when playing the project as a whole.
I can select the music track and play it from within the timeline without a problem, but select the project and all I get is the sound of silence.
after scanning and searching the forum I can't find anything that fits my bill so far.
Drivers have been checked and updated where found wanting. I'm at a loss to explain why. I never had this problem back on the old slow-coach...!
For info I'm running Vista on a dual core 2600Ghz machine with Asus P5K Pro 'board (on-board audio) and a GeForce 8600 GTS graphics card.
View 14 Replies
View Related
Jun 7, 2012
When I create a DVD from the project, the 'normalize audio' option in grayed out and cannot be selected. If I choose AVCHD, Blue-Ray, or BD-J the option is available. I only have the problem with this one project, all the other work ok I installed Video Studio on a new computer and copied the project to the new computer, and had the same problem so it must the tied to the project. I opened a log with Corel tech support but with no results. Version is X5 Ultimate, build 15.1.0.34.
View 14 Replies
View Related
