I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.
I used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.
I updated all the drivers...I tried on an other computer...still the problem.
I have a problem with Corel Video Studio Pro X4, I have a couple of short clips (avi format), put together in a project. Most of them I want to use muted, for the exception of 1 clip, with this one I need the audio. Only... when I play the whole bunch in project mode, all of my clips are automatically muted, also the one where I don't want it to be. It's getting quite annoying, I'm new to the program and can not find a solution for this problem. I tried to unmute the clip, but no luck. When I play the clip separately in clip mode, the audio is fine..
View 3 Replies View RelatedRunning Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedI'm running VideoStudio X2...
Example:
Let's say that there is several seconds of a dog barking in one of my clips. The dog bark is a bit faint, so I need to boost the audio level of the dog barking. Can this be done?
I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
Using X5 Ultimate Using the Edit function tab, and with several clips in the timeline, selecting one, then choosing clip mode and playing the clip in the view panel happily provides the clip embedded sound too. But occasionally, it doesn't. Generally after doing something related, eg today, I was recording a voiceover file to go with a clip, and when finished I just played the clip in clip mode - and just got images, but not the sound which is embedded in the clip (don't expect to hear the voiceover in that configuration). When it happens, I can get the sound embedded in the clip back by:
- choosing project mode, then playing the clip section; or
- changing the function tab to share, then back to edit, and then playing the clip; or
- saving the project file, closing X5 and then reopening both X5 and the same project file, and playing the clip.
Like, the control(s) that manage clip sound in the clip mode, play, seem to get "lost" during some edit functions and require a serious elbow jog to get back together.
Is there a control setting that prevents it happening in the first place?
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)
View 7 Replies View RelatedIn edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies View RelatedUsing X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
I'm using the 30-day trial version of Corel Videostudio Pro X5.
The problem is that all the videos (all files are MPEG-4) I add to the library are muted, I can't hear anything from the audio when I play it. It's the same problem when I add the clip to the timeline, it shows that the clip is normal & the audio should be fine but nothing can be heard. I've tried purposely muting it & then unmuting, I've also tried splitting audio, I've tried all possible audio settings I've found in the program but everything I've tried has no effect. I've checked a million times that the audio on my computer is on, & the videofiles play normally with perfect audio on every media player I have, but I can't hear anything in the editing software.
Is there a setting that makes the files automatically mute & I haven't noticed it, or doesn't Corel Videostudio just support MPEG-4, or is this like a weird glitch in the trial version?
I am currently trying out Corel VideoStudio Pro X4,when i insert different clips into the timeline, as the project plays the audio doesn't start instantly, and there's almost like a 1sec delay before the audio appears.
I seen that there was audio fade in/out options, which can be set to 1-999 (but no 0)
There is any simple method to insert/add a clip on timeline without its sound? I know the methods of locking the audio track in the sequence or deleting the audio track of the clip but I'd like to have some simple shortcut like Option+drag or something similar. There is any?
View 1 Replies View Relatedno sound when playing back clip
View 3 Replies View RelatedI want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.
View 11 Replies View RelatedI have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?
View 3 Replies View RelatedWhen I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedWhen I use the timeline everything goes from 00:00sec to 00:24sec then it gabs to 01:00 and so on.... Why is that and can I change it to use 60sec instead?
View 2 Replies View RelatedMy video studio pro x5 plays for 2 seconds and then stops in my timeline. This occurs after I've splt and deleted some audio and/or put in a transition. Here are my computer specs:
Brand: Dell Laptop
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
Using VideoStudio X4. I Have a JVC VHS unit which captures video perfectly fine. It's connected via firewire from the JVC unit into a firewire 2 adapter and into the iMac. However I also have a Sony 8mm playerGV - D800E unit which plays back via the preview pain on X4 fine, but as soon as you hit capture, it runs for 9 seconds and stops and it does capture 9 seconds of footage. I've run the Sony unit with other apps and it works fine. Just with X4 I have issues with. Tried switching between DVD (array of differnt setting) and DV (Type1 and 2) but with no luck.
I also tried connecting the Digital Sony 8MM player via a video capture device (Canopus ADVC110), same result. It captures video for 9 seconds, VS stops capturing, and the player continues and play's back on the viewer in VS.
I found where I can make a video backdrop for a DVD menu, but the limit appears to be 30 seconds. This is not the case in other programs. Is there a workaround?
View 7 Replies View RelatedIs there a way to apply slow motion to just a couple of seconds or so of a clip without having it apply to the whole clip?
View 3 Replies View RelatedI was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
[URL]
I have this problem in VS11, and was about to buy X5 thinking that the problem would be solved by now. But to be safe I thought that I better try the demo first, and now I find out it does the same thing.
2. Describe your problem: The file is a TV tuner capture from one particular channel, and every time you edit it it produces correct video, but audio with alternate 1/2 seconds of silence.
3. What devices are involved and their mode of connection?: Internal TV tuner cards (Compro and Leadtek)
4. The Version of program is being used e.g. VS11+ VS11.5+ VSX2+VSX3+VSX4+X5
5. list all patches/updates that have been installed relating to that version of the program.
VS11 updated to VS11.5 and X5 with no updates - it won't allow SP1 to install -
6. Details of the source files. Note: to obtain all the properties of a file, right click on a video file in either the VS timeline or library window.[b] Where did they originate (camcorder, internet, TV card etc) How did they get onto your hard drive (download, firewire, USB cable etc.)
Type of video e.g. MPEG2, DV, MTS, Mov, DivX, MPEG4 etc
Video data rate
Type of audio e.g. LPCM, AC3, MP3 etc
Audio data rate
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
Autocad freezes for a few seconds every 30-60 seconds. it did this on my previous full autocad 2011 and now on 2012. i have also had a reinstall. it also does it on the other users computers in the office and also those on LT.
the freeze is rondom. it can be triggered by commands, escape button, panning arround the drawing. The problem occurs periodically for say 1 day every few days autocad will have pauses. But other days its fast with no problems.
i have tried all the usual things for slow down. purge, audit, layerdlgmode. I do not think it is general slow down.
I have created a slide show by Inserting Media file to Timeline, Insert Photos. I then Share, and then Create Video File. This is a great product, so easy. However I noticed that the time delay on each picture frame is about 3 seconds. I have manually increased each slide to 5 seconds using the slider on the timeline. But this is cumbersome. Is there a place to change this default 3 seconds to what I want in the software? I cannot find it.
View 3 Replies View RelatedI have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...
Suddenly Pro X3 will no longer play audio.
I import any mpg file which are known to have sound and when i ty to play it there is no audio at all from Pro X3. This has been working all along and it just seems to have stopped. I have made sure of the obvious things.We get sound from other apps so the computer and speakers are fine. I have checked the sound icon from within Pro X3 and it is turned up to max.