VideoStudio :: Sound On Some Clip Muted When Project Exported

Nov 21, 2011

I used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.

My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.

I updated all the drivers...I tried on an other computer...still the problem.

View 1 Replies


ADVERTISEMENT

VideoStudio :: When Clip Begin Sound Is Muted For About 7-8 Seconds

Nov 7, 2011

I used many clips capture from a Sony HD Camorder.Everything's working fine in VideoStudio when I do a preview of my project.

My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back.I tried to slip the sound from the clip, remove the transition, nothing work.

View 4 Replies View Related

VideoStudio :: Sound On Clip But No Sound On Project?

Oct 26, 2010

Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.

View 3 Replies View Related

VideoStudio :: No Sound On Clip In Rendered Project Via Create Disk Image?

Aug 29, 2012

Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.

But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.

View 14 Replies View Related

VideoStudio :: Clip Automatically Muted And Cannot Be Unmuted

Apr 26, 2011

I have a problem with Corel Video Studio Pro X4, I have a couple of short clips (avi format), put together in a project. Most of them I want to use muted, for the exception of 1 clip, with this one I need the audio. Only... when I play the whole bunch in project mode, all of my clips are automatically muted, also the one where I don't want it to be. It's getting quite annoying, I'm new to the program and can not find a solution for this problem. I tried to unmute the clip, but no luck. When I play the clip separately in clip mode, the audio is fine..

View 3 Replies View Related

VideoStudio :: X4 - Adding Sound To A Clip?

Aug 9, 2012

I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.

I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.

View 5 Replies View Related

VideoStudio :: Clip Sound Temporarily Gone?

Feb 16, 2013

Using X5 Ultimate Using the Edit function tab, and with several clips in the timeline, selecting one, then choosing clip mode and playing the clip in the view panel happily provides the clip embedded sound too. But occasionally, it doesn't. Generally after doing something related, eg today, I was recording a voiceover file to go with a clip, and when finished I just played the clip in clip mode - and just got images, but not the sound which is embedded in the clip (don't expect to hear the voiceover in that configuration). When it happens, I can get the sound embedded in the clip back by:

- choosing project mode, then playing the clip section; or

- changing the function tab to share, then back to edit, and then playing the clip; or

- saving the project file, closing X5 and then reopening both X5 and the same project file, and playing the clip.

Like, the control(s) that manage clip sound in the clip mode, play, seem to get "lost" during some edit functions and require a serious elbow jog to get back together.

Is there a control setting that prevents it happening in the first place?

View 2 Replies View Related

VideoStudio :: Movie Clip Sound Not Playing In X4?

Jul 1, 2012

The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.

When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.

I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.

why the clips are not playing the audio?

View 2 Replies View Related

VideoStudio :: No Sound From Clip Mode At Default 100% Volume

Dec 7, 2012

Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)

View 7 Replies View Related

VideoStudio :: Sound When Playing Clip In Overlay Track?

Jul 23, 2013

In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?

View 12 Replies View Related

VideoStudio :: No Sound When Playing Project?

Jan 2, 2013

i was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...

i'm using X5

ii've record some of my screen in here: [URL]

View 1 Replies View Related

VideoStudio :: Pro X4 - No Sound In Project Form

Jul 18, 2012

When I insert a video to the timeline the only way I can have sound playback is to open the sound mixer. I had this happen once before and I reformatted my hard drive and re-installed everything and It worked fine for a while but now the problem is back. What is causing this to occur. Even when I insert a sample sound into the music track I get an error message when trying to play the clip.....Unable to play the file (16804:2:1)......and it won't play in project mode unless I use the sound mixer.

View 5 Replies View Related

VideoStudio :: No Sound In Project Mode?

May 2, 2011

All the avi's (divx and xvid codec) that i load and put in the timeline have no sound in project mode. When i make a output file there is also no sound in the .avi. When i select a clip in the timeline there is sound....I Have updated divx and xvid. Using WIndows 7 32 bit pro and Videostudio X4.

View 2 Replies View Related

VideoStudio :: No Sound In Edit Mode When Playing Project?

Mar 7, 2013

In VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.

View 14 Replies View Related

VideoStudio :: Project Vs Clip With MTS File

Dec 22, 2010

I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.

I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.

However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.

1). Why?

Here are the properties copied from the Time-line.

2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?

Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.

View 1 Replies View Related

VideoStudio :: No Audio When Playing Project But Clip?

Jan 25, 2011

I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.

I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.

View 5 Replies View Related

VideoStudio :: Clip Is Jerky But Project Is Smooth?

Jun 4, 2012

I'm wondering if it is normal for my clips to have jerky preview. I am editing 1080p MOV clips and I've made sure that Smart Proxy is enabled and that the files do exist. Smart Proxy settings are default to activate with any clip that is larger than 720X480. After I've dragged a clip onto the timeline I get jerky preview if I select "clip" and then click play. But if I select "project" it plays smoothly. Scrubbing is also smooth. My question is why are my clips so jerky? It seems that "clip" preview is automatically using the original video file and not the proxy. I'm on a slow computer, but that's not the issue because everything except the individual clips plays smoothly. And yes, the Smart Proxy icon is on my clips and it's had plenty of time to complete the proxy creation. I've even completely removed VS with Revo Uninstaller and reinstalled it. No change.

View 6 Replies View Related

VideoStudio :: Imported WAV Plays In Clip Mode But Not In Project?

Dec 27, 2011

X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..

I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.

am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??

View 2 Replies View Related

VideoStudio :: Clip Quality Drop On Project Playback

Oct 30, 2012

I have imported 5 clips into Videostudio Pro X4, all taken concurrently with the same camera/settings etc. If I play back a single clip, the quality is as I would expect it to be. If I switch to playing back project rather than clip, there is a noticeable drop in quality.

View 3 Replies View Related

VideoStudio :: Audio Breaks Up On Project But Not Clip During Editing

Aug 18, 2011

Describe your problem: Once I've inserted a video file or files into the project timeline, playing the videos with the word "Project" under the screen highlighted, the audio (which is speech only) breaks up - all I hear is parts of words every second or two. Highlighting the term "Clip" just under "Project" provides clear, unbroken audio. This condition is new, first occurring after I installed VideoStudio Pro X3 Fix for MLE Database Incompatibility with PaintShop Photo Pro X3. Since then, I have re-loaded VSX3 and all the patches but to no avail. Note: the same video files can be processed by Windows Live Movie Maker and the audio and video come out fine, even if the effects are primitive.

What devices are involved and their mode of connection?: NONE, files are either in the VS Projects file or in my Videos folder. The Version of program is being used: Video Studio Pro X3. Please list all patches/updates that have been installed relating to that version of the program. I've installed all three patches and updates available on the Corel site (thru the User to User board) plus any updates offered by Corel.

Details of the source files. Quick Time movie, 24 bits 1280 x 720, 1 video track, 1 sound track - sound track is MPEG-4, low complexity
Where did they originate: camcorder
How did they get onto your hard drive USB cable
Type of video: Quick Time Movie
Video data rate: 29.970 frames/second
Type of audio: MPEG 4 low complexity
Audio data rate: 48,000 KHz, 16 bit, Stereo

Project Settings: As the software was shipped. I haven't changed any settings.

NTSC

Did this error occur at the: EDIT step - but it continues in the SHARE step - except the sound goes completely away after processing. OR have you gone directly to the SHARE - NO

Error Codes NONE

View 14 Replies View Related

VideoStudio :: Super Fast Then Blank Clip Playback In Project?

Jan 22, 2013

I am editing a video and the footage is an HD .mov (30 fps, 24bit 1920x1080 48s in length) file recorded directly from a logitech webcam. The clip plays fine in the Library, but when I add it to the storyboard/timeline the video plays super fast, then goes blank for the duration of the clip.

View 2 Replies View Related

VideoStudio :: X5 - Editing Volume Difference Between PROJECT And CLIP Play

Aug 16, 2012

I purchased VideoStudio X5 for HD editing of .MTS clips from my Panasonic HS700 video camera. I transfer the clips to my hard drive using explorer and then use the X5 program to bring them into the library and then to the timeline. Due to my volume problem I re-downloaded VSX5, reinstalled it and installed SP1 patch, updated my Video Card Driver to the latest, updated Direct X and made sure my Microsoft Updates are all up to date.

My Volume problem is, during the editing proces you use both the Project playback and also individual clip playback. Without any manual changes to clip volume, when I play an individual clip the volume is substatially higher than when I play the project over the same clip area. This is annoying to me and those nearby. Earlier versions of VS did not do this.

If I change the individual clip volume up or down from 100% then when I play either the project or individual clip the volume remains the same (ie.it is no longer louder in clip mode).

View 3 Replies View Related

VideoStudio :: Matching Project Settings To AVCHD Video Clip - X3?

May 28, 2011

I'm trying to match the project settings to an imported HD video clip (1920x1080 *.mts).I've been using videoStudio for years but only in 720x480 SD. I just got a Panasonic HDC-SDT750PP HD camera and want to make sure the video output file makes the most out of both camera and X3 but in project settings it only allows 720x480.

Does the project setting have any affect on the final video file?The properties of the video file says 1920x1080 24b H264 yet the source file extension is *.mts

My intention is to create a HD video file that I burn to a Hybrid DVD until I get a Blu-ray burner but what format to save the file in if the X3 project setting only goes to 720x480.

View 2 Replies View Related

VideoStudio :: Pro X5 - Videos (MPEG4) Automatically Muted?

Jun 17, 2012

I'm using the 30-day trial version of Corel Videostudio Pro X5.

The problem is that all the videos (all files are MPEG-4) I add to the library are muted, I can't hear anything from the audio when I play it. It's the same problem when I add the clip to the timeline, it shows that the clip is normal & the audio should be fine but nothing can be heard. I've tried purposely muting it & then unmuting, I've also tried splitting audio, I've tried all possible audio settings I've found in the program but everything I've tried has no effect. I've checked a million times that the audio on my computer is on, & the videofiles play normally with perfect audio on every media player I have, but I can't hear anything in the editing software.

Is there a setting that makes the files automatically mute & I haven't noticed it, or doesn't Corel Videostudio just support MPEG-4, or is this like a weird glitch in the trial version?

View 5 Replies View Related

VideoStudio :: Muted Audio At Start Of Clips?

Mar 1, 2011

I am currently trying out Corel VideoStudio Pro X4,when i insert different clips into the timeline, as the project plays the audio doesn't start instantly, and there's almost like a 1sec delay before the audio appears.

I seen that there was audio fade in/out options, which can be set to 1-999 (but no 0)

View 4 Replies View Related

AutoDesk Smoke :: How To Insert / Add A Clip On Timeline Without Its Sound

May 9, 2013

There is any simple method to insert/add a clip on timeline without its sound? I know the methods of locking the audio track in the sequence or deleting the audio track of the clip but I'd like to have some simple shortcut like Option+drag or something similar. There is any?

View 1 Replies View Related

Photoshop Elements :: No Sound When Playing Back Clip?

Dec 3, 2012

no sound when playing back clip

View 3 Replies View Related

Premiere Pro :: Can't Change The Volume Of The Sound Over Time Within A Clip

Dec 16, 2013

I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.

View 11 Replies View Related

Premiere Pro :: Last Audio Clip Not Playing When Exported?

Mar 4, 2014

I have a short 5min film for a student film fest, all the audio and visual plays perfectly in the timeline. However, when exported, the last audio clip (which is a 'button' and comes after two soundless title slides) does not play at all. Again, it works perfectly in timeline. All audio files are .WAV and I've tried exporting it in several different fashions, none of which have made a difference.
 
For the film fest I need to export in 16:9, Apple ProRes 422 (HQ). I tried this, among regular Quick Time export, Vimeo export, and others...every single export the audio on the 'button' didn't play at all but the clip is there.

Side Note: I tried adding low volume audio to bridge the last clip to the button to see if that made a difference so there would be no gaps in the audio timeline, but it did nothing.

View 1 Replies View Related

After Effects :: Imported A Clip From Imovies And Cannot Play Back The Sound In Preview

Aug 25, 2013

I have imported a clip from imovies and cannot play back the sound in preview. What have I done wrong?

View 3 Replies View Related

VideoStudio :: Selecting Clip Goes To Front Of Clip?

Oct 11, 2011

When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved