In VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Repliesi was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
All the avi's (divx and xvid codec) that i load and put in the timeline have no sound in project mode. When i make a output file there is also no sound in the .avi. When i select a clip in the timeline there is sound....I Have updated divx and xvid. Using WIndows 7 32 bit pro and Videostudio X4.
View 2 Replies View RelatedThe movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies View RelatedRunning Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedI am working on creating a project and it all goes well when I have it in the edit tab. I am able to listen to the audio and watch the video.
When I hit the Share Tab and watch it the audio disappears and I can't hear anything anymore but can still see the picture.
I have split the audio from the video to see if this corrects the problem and it doesn't. I know my microphone is picking up the audio or I wouldn't be able to hear it in the edit tab. I have made several videos before using the program and have never encountered this before.
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies View RelatedI am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
I just upgraded to Windows 8. All with Videostudio X5 is working fine, except MP3 files will not play in the Library. I get this strange hiss. If I drop the mp 3 file into the time line on any audio track and then play the project it plays fine. Wave files play fine. I did a uninstall and re-install of X5 to see If that would fix the problem.
View 3 Replies View RelatedWhen I insert a video to the timeline the only way I can have sound playback is to open the sound mixer. I had this happen once before and I reformatted my hard drive and re-installed everything and It worked fine for a while but now the problem is back. What is causing this to occur. Even when I insert a sample sound into the music track I get an error message when trying to play the clip.....Unable to play the file (16804:2:1)......and it won't play in project mode unless I use the sound mixer.
View 5 Replies View RelatedI used many clips capture from a Sony HD Camorder. Everything's working fine in Video Studio when I do a preview of my project.
My problem is with the exported file ; on some clip, when the clip begin the sound is muted for about 7-8 seconds, After that, the sound come back. I tried to slip the sound from the clip, remove the transition, nothing work.
I updated all the drivers...I tried on an other computer...still the problem.
Is it by design that I cannot hear sound from videoclips played in "clip" mode when the volume is set to 100% ? I can hear the sound OK when the volume is changed to anything other than 100%, like 101% or 99%. By the way I can hear the sound OK when played in Project mode at 100%, just not in clip mode at 100%. This is very annoying as I need to change the volume of each clip to hear it. Product is VS-X5 digital purchase. video clips are from Leica Dlux-5 foto camera, which is basically a panasonic inside (avcdh lite 720p)
View 7 Replies View RelatedUsing X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
When I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
I have seen others with this problem. I have downloaded all current codecs. I have audio in clip mode but not project mode. All attempts to edit and save file result in no audio.
this is the third version of video studio I have purchased.
Project properties
Xvid MPEG-4
24 bits 624 by 240
Audio Mpeg layer 3
113 kbts
48.000 kz stereo
no sound when playing back clip
View 3 Replies View Related X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
If I playback in fragment mode, the speed is ok. But if I playback in project mode the speed is a little slowing down.
How is this possible ?
I started a project and watch a lot of files in the source monitor to set IN and OUT points. When the file playes f.e. more than a minute the sound gets muted while the film is still running. First I thought it wood be a matter of my external HD from where I loaded the files. Now that I take the same or any other files from my internal sata 3 harddrive the behaviour is still the same.
When i scroll the mouse wheel to move some frames back and forth the sound is back when i hit the space bar. It's the same if i just hit the space bar once to pause and then hit it again to resume.
The effect shows after different amount of times, sometimes after 45 sec. and sometimes after 2 minutes +
I am running Pr Pro CS6 (latest update installed some days ago) on a windows 7 ultimate x64, 16 GB of ram, Nvidia GTX 670, i7 3770, HD is a WD caviar black
The movie clips come from a Panasonic Lumix FZ 150 in FullHD resolution as h.264 MP4 files.
I am quite sure that some months ago this behaviour was not present. I did not change anything on Premiere CS6 but running the updates.
I'm using Videostudio x4, a recent installation on a 2 week old 'Dell Inspiron one 2320'. The computer is an 'All in One' and runs great generally.
Members, I seem to remember when I was running what was back then the Ulead version years ago, and, that it was better to have a second hard drive as a scratch disk for the realtime, or Timeline project playback, the reason I ask, I still suffer some jerky-ness when picking 'Project' in the edit playback window, I do not suffer problems when rendering the project as a final video format.
The Dell spec is the highest I could get, a i7 intel 3.8 processor, 8gig ram, 2tb HD, 1gig Nvidia Gforce GC, Intel HD sound card, with a monitor of 1920x1080 Full HD, the USB is 2.0 (3.0).
If the idea is a sound one, what changes do i make and where in the settings do I make them, also would using a 16 gig Patriot flash dongle be any good, or should I get a bigger HD for the job, either 30 to 60 gig SSD or bigger 7200rpm HD type.
I am using VS Pro X4 with Windows 7 home premium, Processor Intel (R) Core (TM) i7 CPU Q820 @ 1.73GHz 1.73 GHz. 8 GB RAM. 64 bit op syst. NVIDIA GeForce GTS 360M. Also I am mostly using GoPro 2 Mpeg4 files (which I have updated so I can finally use it in VS) When I am edit mode and click play back to view what I have edited prior to rendering. It often plays ok until it goes from one clip to another then it starts to play jumpy or jerky video including the sound. Which makes it impossible to see how well your edit is. If I leave it for 1/2 hour or so and come back to it, it sometimes plays fine. But then add more clips to the vid or add in a transition or effect it will then play back jerky again.
View 7 Replies View RelatedUsing VS X2, There is only black screen when editing sample file or any other video. All load correctly and can be viewed as individual clips but only black screen when playing "project" . Have re-installed program (repair) - no change.
View 6 Replies View RelatedOn the edit screen, the orange strip, which I assume means content, stops at approximately 7:31 on my timeline. All vide I have added stops here on my preview. I cant get past it.
View 1 Replies View RelatedI am using Pro X3.
When I create a home movie and add chapter points through the edit mode, and then go to burn a DVD, the Chapter points that I created in the edit mode are not showing up in the Corel DVD Factory burning software.
I can re-add the chapter, but why would the chapters that I just added, not show up? What is the point of having the options to add chapters in the edit mode, if this information was not transferrable to the burning process?
I am not able to edit degrees of freedom (dof) after playing a simulation.
This is what I did:
Created a dynamic simulation and imposed motion on a prismatic joint.Edit dof and Input Grapher before playing the simulation.Play the simulation.After playing simulation for first time, dof and Input Grapher are dimmed (grayed out) and can not be edited.
Here are screen shots of the dimmed dof and Input Grapher:
I am using Inventor 2012. A simple example is attached.
I want to capture or copy sound from a project in Elements 8, save it to a file, and use it later in the project.
View 1 Replies View RelatedWhen I'm working on a project, "Corel needs to close" when I play the supplied .mpa (sound effect) files whether it be as a clip or in the project. I've downloaded the X4 update.
View 4 Replies View RelatedI was trying to play around with the software to get to know it, and... well, I think I made something weird in it. Everything was flowing nicely when I was following the tutorial about Editing Objects: I created a box, I selected that edit poly option from the modify tab and I could edit vertices totally nicely.
But then, I really don't know what happened, but, I don't know exactly when, I suddenly could not move the vertices AT ALL. They are pretty visible, but when I select them, they turn red and the axis are not editable! I'm so confused! I can edit the axis very normally if I'm using an option like Select and Move but... With the edit poly thing I just cannot! I tried everything I thought of: Made a new box, restarted the program, restarted the PC! But NOTHING worked.
EDIT: It took me almost an hour to figure out I wasn’t selecting the Select and Move tool!