In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies
The movie clips in my "project" are not playing the audio. Yes, volume is on and I have ensured that the volume is all the way up and that the "mute" option has not been selected. Screen cap is attached of the video tab.
When I click on the individual "clip" the sound works no problem. The other audio files are also working no problem.
I should mention that the original file was an IFO file from a Sony Handicam that I converted to AVI which I dragged into the program.
why the clips are not playing the audio?
I can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies View RelatedI can’t put a border around an overlay track clip once it has been rotated. If I put a boarder around an overlay track clip prior to rotation then it is removed upon rotation.
I use VideoStudio x4.
no sound when playing back clip
View 3 Replies View Relatedi was work on some project and it's was going well and everything was just fine but then i've saved it and close the program (went to watch tv). after few minutes i've opend the program again but then the sound didnt play with "project" but only when i play the clip alone or in edit sound mode. * when i'm playing the project on "audio" instead of "thumbnail" it's working fine...
i'm using X5
ii've record some of my screen in here: [URL]
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedIn VS Pro 4, in edit mode, I get no sound when I play the project but sound is OK when I play the clip. Then if I switch on the sound mixer I get sound when I play the project.
View 14 Replies View RelatedI have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.
Is there a way to change the name of the sound clips ?
I have few avi video clips which I believe I imported from camcorder using windows moviemaker. When I play those clips in any media player they play fine.
I have latest Corel Video Studio Pro X3. When I import this videos into timeline and play clips sound plays fine but when I play the project there is no audio. Even if I render it there is no sound.
I have installed VideoStudio Pro v6 on Windows Pro 64 bi. I tried insert the sound files onto an empty track/video and it just won't play the click ...the audio file just doesn't play.
I can play the sample videos but if I add a sound track that came with the software I get this error. What do i need to do to fix it?
The error message is:
Unable to play the file
[16804:2:1]
On some clips in my project, when I play them in project mode, the original sound recorded by the camera is gone, and replaced with a weird slow pinging/tapping sound. Weirdly, when I play these same clips in clip mode, they're fine - the original sound is there - it's only in project mode that the problem occurs. Even more weirdly, it's not every clip in my project that's affected - just a few, and in no pattern I can detect. I have not seperated the sound from the clip. And additional sound tracks - such as narration and added music play fine.
I even tried creating a whole new test project, in case I had unknowingly changed some setting in my first project, but same problem - sound is fine in clip mode, missing and replaced with weird pulsing ping in project mode.
The only variable that's changed is that I downloaded the upgrades Corel offered a couple of days ago - the DVD authoring software, and upgrades to VideoPro. Didn't have the problems pre-upgrade. Have them now.
I downloaded the trial version of Video Studio X6 to compare with my current Camtasia 7. I did a screen capture and saved it as a mp4 format. Now that I put it in VS, I can see and hear the recording in the preview, but in the timeline, I only see the video track and wmv. Where is the audio track for that recording?
I found it hidden until I clicked on Graphic > Voice Track.
Any way to remove background noise? I know it is feasible in Camtasia. I assume it is also feasible in VS, but where and how?
I've installed NewBlue ColorFast, and it shows up in VS X6 as expected. If I drag and drop it onto the video track, the changes I make apply, no problem. But if I drag and drop it onto the overlay track, then make the changes I need, they don't stick … they go away when the dialogue is closed. Is this filter limited to the video track only? Or do I have a problem here?
View 6 Replies View RelatedI rendered (in animation software) a series of .png files with transparency for an overlay in VidStudio. 150 of them that all need to be shortened from the default photo duration of 3:00 seconds. Plus, for each one, I will need to adjust the size of the overlay track. Is there a way to manage the entire track for these adjustments? Or a place to adjust the preferences..?
View 6 Replies View RelatedWhen I try to combine 2 videos to play over each other (i.e. one full screen one anchored in a corner) the overlay track plays at an accelerated rate with no sound, whereas the main video will play as normal. However if I switch them around the same problem arises, the overlay video plays fine the main accelerated with no sound.
If I play them separately they will both play fine. The video I am trying to anchor was recorded with a webcam and therefore may be the problem. If I need to give more details w/ specs etc.
I'm just about ready to buy Corel Studio Pro X5, but one "issue" is bothering me, I cannot fade in and out the overlay track. I can drag the cross-fade onto the image or video, but it doesn't cross-fade with the actual video. Instead, the screen suddenly goes black and the overlay track fades in. Same on the way out, it just fades to black (queue the music ) and then the underlying video pops back in.
I'm using the 30-day trial Video Studio Pro X5.
Using Video Studio X4 I have noticed that I can insert a Title to the overlay tracks. The initial title goes to the title track, but can be dragged to the overlay track.
I’ve had a look at the track manager and as expected there is still the option to use two title tracks. Even so the ability to use the overlays for titles is very interesting.
I have seen tutorials and used successfully the process needed to produce a cross fade between the primary video and overlay tracks in VS pro x5, but it's a process requiring several steps. I was recently revisiting my VS version 9 located in another computer when I noticed that VS9 seems to automatically place crossfades between the two tracks.
Is it possible to do this in VS pro X5? Was this feature abandoned on versions later than VS9?
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I recently purchased Corel VideoStudio X4. I installed SP1 and SP2. I am facing very long delays in a project with 1080p files. The slowness only comes when Smart sounds track is added. If I delete it, everything is back to normal. I have tried rebuilding the index for Smart sounds Quick tracks but the problem persists.
View 2 Replies View RelatedWhen I place an .avi file onto the overlay track it will only play the sound and not the video. The screen just remains black with the sound coming through.
View 5 Replies View RelatedWhen I add a photo/clip into an overlay track, it is always too small and I end up having to re-size every one of the clips/photos.
Is there a way to define the size of the "default size" of an overlay clip/photo?
How do I align/rotate a still image on the overlay track using Corel Pro x2. and is it possible to place text on the still image?
Windows XP H/P t650uk
2 Gbt memory
80Gb hard drive
How can i move an an overlay track through the time line ?
EX. the overlay track is a logo & i want it to keep moving around the screen through the video.
An Overlay track has a photo on the end of the track, there are also photos at the start of the track.
When right clicking on this track behind a photo at the start end of the track to insert a photo behind an existing photo, the new photo goes behind the photo at the end of the track.
Is there any way to use right click and insert the photo where you want it?
i wanna write text but make it behind the overlay image track , how can i do that ? every time i write text it comes in front of the image.
I'm using X4 version.
Is there a way to set the relative picture size of an overlay image in the preview window (picture in picture) to a presetted size and AR by default. My overlay pictures never have the original AR unless I select "original aspect ratio" every time.
View 1 Replies View RelatedWhen I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
When I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
I am making a montage of previous logos for a piece of software. As one can guess there will be a lot of pieces I want transparent. The montage will be a moving animation-like video, making it look at though you are moving towards the most recent logo.
I have created .png files of each logo (exporting from CorelDraw 11) making their backgrounds transparent. I then drag and drop the clip on to an overlay track. (I used an instant project and it came with overlay tracks which have an option checked called "Apply filter to Alpha channel," With the "Apply filter to Alpha channel," option checked I set the overlay track to fit the screen and then click the maintain aspect ratio. At this point all the places where the original picture isn't is transparent, but not the background of the picture. I'm making the overlay track size the size of the screen so I can have the logo move across the screen within the picture-in-picture filter which I then add to the overlay track. When I customize the PIP filter I have the logo fade in for the first half second or so in the middle of the screen, then move and tilt to the right or left (I alternate every other logo). At this point I think that the "Apply filter to Alpha channel," is still on, I then create a chroma key with the adjust colour similarity at 100 to make the background of my image transparent (I'm not sure why that part isn't automatic; I'm using two Corel products and I have created an alpha channel in the .png file so that as soon as I put on the timeline it should be transparent, but that doesn't happen, it goes back to the colour I originally made transparent in CorelDraw). Once I have created this chroma key, the space that was originally transparent due to the "Apply filter to Alpha channel" option, goes black. (this area is the spaced enclosed by the extents of the overlay track size and the edge of the .png file). When I right click on the logo in the timeline, there is no option to "Apply filter to Alpha channel" which I guess means you can't have a chroma key and this Alpha filter on at the same time. To remedy the black space I go to the transparency slider and set the value to "1" which gets rid of the black immediately and doesn't seem to make the rest of the image transparent at all (I'm sure technically speaking it does but 1% transparency isn't enough to notice in the .png file).
And now, the problem:There is a white-ish boarder at the edge of the .png picture. and try as i might, I cannot get rid of it. It really ruins the transparent effect. Is there a way to remedy this? or a better way of getting the effect I want which doesn't need to use both the transparency and the chroma key? I've just thought of making a really large .png file with the logo at its center and zooming in quite far in, so there is a white back ground wherever i move the logo and then using a single chroma key to get ride of the background.
[UPDATE]It is the NewBlue PIP that is creating this boarder even when you turn off all boader, shadow and reflection there it is with the boarder of the transparent portions. I also tried rendering this portion to see if it still showed up and its still there even after rendering. Also my idea of making a large picture didn't work, you can't go bigger than 100% when in the PIP editor so the border is still there, closer tot he edges of the screen, but still there none the less.
