I have been recording some narration in little chunks (for easier editing if needed), but they are called uvs130819-011.WAV. I understand about the date, but I would rather have them named by the first few words of the "paragraph" read, or something else that would make more sense to me.
Is there a way to change the name of the sound clips ?
I have installed VideoStudio Pro v6 on Windows Pro 64 bi. I tried insert the sound files onto an empty track/video and it just won't play the click ...the audio file just doesn't play.
I can play the sample videos but if I add a sound track that came with the software I get this error. What do i need to do to fix it?
The error message is:
Unable to play the file
[16804:2:1]
On some clips in my project, when I play them in project mode, the original sound recorded by the camera is gone, and replaced with a weird slow pinging/tapping sound. Weirdly, when I play these same clips in clip mode, they're fine - the original sound is there - it's only in project mode that the problem occurs. Even more weirdly, it's not every clip in my project that's affected - just a few, and in no pattern I can detect. I have not seperated the sound from the clip. And additional sound tracks - such as narration and added music play fine.
I even tried creating a whole new test project, in case I had unknowingly changed some setting in my first project, but same problem - sound is fine in clip mode, missing and replaced with weird pulsing ping in project mode.
The only variable that's changed is that I downloaded the upgrades Corel offered a couple of days ago - the DVD authoring software, and upgrades to VideoPro. Didn't have the problems pre-upgrade. Have them now.
I downloaded the trial version of Video Studio X6 to compare with my current Camtasia 7. I did a screen capture and saved it as a mp4 format. Now that I put it in VS, I can see and hear the recording in the preview, but in the timeline, I only see the video track and wmv. Where is the audio track for that recording?
I found it hidden until I clicked on Graphic > Voice Track.
Any way to remove background noise? I know it is feasible in Camtasia. I assume it is also feasible in VS, but where and how?
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I recently purchased Corel VideoStudio X4. I installed SP1 and SP2. I am facing very long delays in a project with 1080p files. The slowness only comes when Smart sounds track is added. If I delete it, everything is back to normal. I have tried rebuilding the index for Smart sounds Quick tracks but the problem persists.
View 2 Replies View RelatedIn edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies View RelatedWhen I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I'm trying to enable multi-sound track editing in Max 2011. I assigned ProSound from the Animation tab of the Preferences dialog, but do not see any changes made to the track view in my window. The help documentation specifies that new tracks would appear under the "World" object in the Track View, but alas, I do not see them there. How to enable that feature?
3DSMax 2011 | Windows 7 Ultimate x64
Apple iMac 27" Bootcamp
Intel Core i7 3.4GHz
16GB RAM
ATI (AMD) Radeon HD 6970M
when I right-click on the soundtrack and select 'edit in audition' it does the 'render and replace', but does not open Audition. Even when I open Audition first, it will not place the sound track in the Audition software.
View 1 Replies View RelatedI see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedIs it possible to edit and play sound from a video clip and Audio sound track in a Slide show?
View 1 Replies View RelatedI am exporting dailes clips.We record dual system and there are two different audio levels - on the two different channels.However, when I export a clip from Premiere and set the audio option tol the uncompressed codec it defaults to a "single track" audio layout with no option to change. However, if i change the codec to AAC or any other I am allowed to chose whether I want a single mono track or a stereo track.
Additionally - if that single uncompressed track is an amalgamation of my original two tracks - or if it has just defaulted to one or the other.
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedAfter trimming and clipping videos, I drag the segments that I want keep into the library. All of the clips that I move into the library have the same name as the original. Is there any way of renaming the trimmed clips?
View 2 Replies View RelatedI have a problem with Video-Studio ProX 4: If I insert a new file in the midst of a cued sequence of files, than the cued video-files of the video track give place and stay synchronized, but NOT the subtitles on the title track - therefore I must they all manual synchronize again with the video-track, - what can I do?
View 2 Replies View RelatedI have recently completed a new project and made a video file (using the DVD option). This video file plays perfectly with media player etc., but when I the burn a DVD from the file all I get is the pictures with no sound.
I am using VS Pro x4 ultimate - what I am missing (apart from the sound! )
I've installed NewBlue ColorFast, and it shows up in VS X6 as expected. If I drag and drop it onto the video track, the changes I make apply, no problem. But if I drag and drop it onto the overlay track, then make the changes I need, they don't stick … they go away when the dialogue is closed. Is this filter limited to the video track only? Or do I have a problem here?
View 6 Replies View RelatedI rendered (in animation software) a series of .png files with transparency for an overlay in VidStudio. 150 of them that all need to be shortened from the default photo duration of 3:00 seconds. Plus, for each one, I will need to adjust the size of the overlay track. Is there a way to manage the entire track for these adjustments? Or a place to adjust the preferences..?
View 6 Replies View RelatedWhen I try to combine 2 videos to play over each other (i.e. one full screen one anchored in a corner) the overlay track plays at an accelerated rate with no sound, whereas the main video will play as normal. However if I switch them around the same problem arises, the overlay video plays fine the main accelerated with no sound.
If I play them separately they will both play fine. The video I am trying to anchor was recorded with a webcam and therefore may be the problem. If I need to give more details w/ specs etc.
I have googled about changing the height of individual tracks and couldn't find much. Is it adjustable? If not, is this planned for the future?
View 1 Replies View RelatedI'm just about ready to buy Corel Studio Pro X5, but one "issue" is bothering me, I cannot fade in and out the overlay track. I can drag the cross-fade onto the image or video, but it doesn't cross-fade with the actual video. Instead, the screen suddenly goes black and the overlay track fades in. Same on the way out, it just fades to black (queue the music ) and then the underlying video pops back in.
I'm using the 30-day trial Video Studio Pro X5.
I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
Using Video Studio X4 I have noticed that I can insert a Title to the overlay tracks. The initial title goes to the title track, but can be dragged to the overlay track.
I’ve had a look at the track manager and as expected there is still the option to use two title tracks. Even so the ability to use the overlays for titles is very interesting.
I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 Replies View RelatedI have seen tutorials and used successfully the process needed to produce a cross fade between the primary video and overlay tracks in VS pro x5, but it's a process requiring several steps. I was recently revisiting my VS version 9 located in another computer when I noticed that VS9 seems to automatically place crossfades between the two tracks.
Is it possible to do this in VS pro X5? Was this feature abandoned on versions later than VS9?
I'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn
1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.
I'm using a freshly installed VideoStudio Pro x5, so all settings are standard.
I imported XXX.MTS files (AVCHD) from a camcorder into VSX5.
Info on the files
File format: NTSCVideo Type H. 264
29.97 fps
Audio Type: Dolby Digital
48khz , 2 ch
Bite rate 18.00Mbps
If i preview the files before putting them into the project, there is no sound, movie plays fine.
If i add them to the project and select "project" instead of clip there is sound...
If i add them to the project and select "clip" instead of project there is no sound...
I updated my VSX5 with SP1 but it didn't work...