I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 RepliesWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedI am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
View 2 Replies View RelatedIt is quite obvious you can change the duration for any individual photo display time on the video track. I also see that you can stretch or compress the music track to fit time of the slides. However, this would distort the audio track to some extent. Is it possible to select some or all of the photos and automatically set an average time so the sequence will equal the play time of the audio (ideally one file, multiples, or complete audio track)? Also, Is there an upper limit on the number of photos that can be in the video track (obviously there would be an upper size limit for a given media that would be used)? What are some of the upper limits reported and have rendering issues resulted at some poin?
View 1 Replies View RelatedIn VSX4, when laying a background music track for a project, is it possible to raise and lower volume of sections of the track along a continuous track of music?
View 1 Replies View RelatedWhen I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
I just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
Does it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
View 3 Replies View RelatedI need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies View RelatedHow do I select more than one music track for a LR3 slide show?
View 2 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedI am syncing pictures , effects and video snippets to a song. Why is that when I ever I add a new set of pictures or effect, it moves my music as to make space for it despite using a different layer. Is there a way to lock the music in place as I add more photos and media?
View 9 Replies View RelatedWhen we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
View 11 Replies View RelatedBrand spankin' new user to X4. I'm working on a fairly simple slideshow that starts with a 15 second MOV file, followed by 10 pictures at 3 second intervals along with some background music. The issue I'm having is that when I go to generate a WMV file (or any format), X4 renders multiple times and spits out multiple files.
I'm sure there's a setting somewhere that I haven't set properly...
As I am testing more functionalities (and finishing up a video, obviously), I am trying to add a background music. For now, I used one that came with VS. I am reducing the Clip volume to 3 (I think that is 3%) and it is still too loud. If I move it down to 2, it is inaudible. Is there another adjustment somewhere? I really cannot have a background music compete with the narration!
View 14 Replies View RelatedJust upgraded from X4 to X5, and it seems something is wrong. When I click the Auto Music icon, all options are greyed out.
Okay, it's been over six months since I last used VSX4, but I don't remember having to do anything special to use Auto Music.
Computer is: Dell XPS 8300
Intel Core i7-2600 CPU @ 3.40GHz
DDR3 SDRAM 8 GB
Motherboard - Dell Inc. 0Y2MRG
Graphics - AMD Radeon HD 6450
OS - Windows 8 Pro
I have uninstalled/reinstalled several times, and have installed VSX5 SP1.
I have Videostudio Pro X3 and how to loop a music track? I have a 25 second long music clip but need it to stretch out for 2-3 minutes.
View 2 Replies View Relatedis there a way to separate music from speech and SFX? I want to keep the music out ONLY, so I can re-write it.
I understand 5.1 has 5 channels, so are the speech & SFX separated from the music?
By the way, it's enough to have only ONE channel with ONE type of sound (i.e. music), because then I can extract it and reverse-phase it to (partially) cancel out it's equivalent from the master audio track. It's not perfect but enough.
I have assembled a project and shortened the sound track in the last segment. How exactly can I fade out that last segment only?
View 7 Replies View RelatedIn the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View RelatedAm I doing something wrong when setting up the menu and rendering a DVD? Everything sounds perfect/ lines up when I view it in my timeline but after it is burned to a DVD the sound is off by 2-3 seconds. It's only a 15 min video.
View 1 Replies View RelatedI been searching around but other than going to the smart sound website and buying their software I do not know of any other sound software which allows me to create multilayer music for video studio. Additionally it does not appear that their software contains a plugin for Corel videostudio. So what are my options concerning creating custom music for videostudio?
View 2 Replies View RelatedI hit Automusic in X5 pro. It came on and now I can't get it to go away. Didn't mean to get it going but there seems to be no way to turn it off and get rid of the trak. Do I have to reedit this whole video starting again. There must be a way, but I just can't seem to find how to turn it off.
I even uninstalled automusic from the computer - no luck. there is a little brown line begins at 3 seconds and runs just over the video track. Is this automusic or something else?
As a newbie hopping to put video with my still images I started out by making a DVD of a video of a boat followed by the same boat after Mercali processing. Video were fine and Mercali worked as it says. How do you get a plain DVD without one of the fancy backgrounds that the program makes you chose to start the DVD which need titles and without horrible music that came from nowhere? I cannot find how to make a video with nothing at the start that goes straight into the video you have made. All I want is how to make a DVD of my videos (I can put the title on top of the video at the start) that you put into a DVD player that self starts or at worst needs you to press play on the remote control.
View 5 Replies View RelatedI have VideoStudio X3 Pro and just want to convert all my DV tapes to DVD - no background music, no fancy themes, just conversion with a menu and 15 minute automatic chapter breaks (or scene breaks using the X3 scene detection).
The only way I can test the themes provided in X3 to see if they have background music is to burn a tape to DVD. That just isn't very efficient.
how I can do this, which theme to use, or a way to adjust the theme before it burns?
When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?
View 14 Replies View Relatedbasically my 24fps footage isn't rendering smoothly ON X5 Ultimate.
[URL]
What i've done is put the same clip together twice, as strangely the first clip is smooth, then subsequent clips are all jerky. This has been going on for some time, so switched to 25fps. 25fps from my Canon 5D MKII wasn't as good as 24fps, so switched back and decided to try and sort this out.
I have been through multiple settings, deleted all older versions of Corel, removed then re-installed X5, made sure all patches and updates were installed - made no difference.
Using X5, I've been assembling video clips taken on holidays into small, specific topic mini-movies (say about 2-3 mins long each) for friends and family, and I've noticed an odd effect of rendering using the MPEG optimiser option when creating a video file from a set of project parts.
All the source clips have a 16.9 aspect ratio. The project file has full, trimmed, and cut clips, plus text, voice over and music.
Put together in a project file, the various clips fill the small or large display windows, as one would expect. Trimmed and cut clips made not difference to the display when playing. But the rendered result of that project file shows irregular "jumping" of the image aspect ratio: sometimes, it's the full display window, at other times it looks like the image is full width but there are black bars top and bottom, and still other times the reverse - bars on the side with a full vertical image.
Those latter characteristics are symptomatic of a 4:3 image converted to 16:9, and I promptly checked to make sure the sources were all 16:9, and they were. The jumping seems to happen within rendered clips and when a clip transitions from one to the next, but not every time. When it happens within a clip, the display 'flickers" as the aspect ratio changes and its that flicker that originally drew my attention to what seemed to be happening.
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.