It is quite obvious you can change the duration for any individual photo display time on the video track. I also see that you can stretch or compress the music track to fit time of the slides. However, this would distort the audio track to some extent. Is it possible to select some or all of the photos and automatically set an average time so the sequence will equal the play time of the audio (ideally one file, multiples, or complete audio track)? Also, Is there an upper limit on the number of photos that can be in the video track (obviously there would be an upper size limit for a given media that would be used)? What are some of the upper limits reported and have rendering issues resulted at some poin?
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
I am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
In VSX4, when laying a background music track for a project, is it possible to raise and lower volume of sections of the track along a continuous track of music?
When I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
I just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
Does it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
I need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
I'm using Lightroom 4.2 (I have used Lightroom since the very beginning) and I found following problem:
I am in the development moduleI select all photos in my folderI activate the automatic synchonizationI change the selected user defined lens from the Tamron 70-200/2.8 (which is wrong) to the correct Tamron 28-75/2.8 (-> there's a known problem in the automatic detection of the different Tamron lenses because of the ID in the lenses, so automatic detection doesn't work - tell me if I am wrong!)The progress bar shows that it's writing the changes to the selected photos (which takes a moment)Then it seems to be synchronized and I continue workingAfter some photos it shows the 70-200 mm lens to be selected again!
So obviously it didn't sychronize all selected photos!
After input keywords on each photos located on server from my computer, it can be synchronized? Then ohter multiple computers can find the photos on server searching by keywords.
I am new to Lightroom, and just purchased LR 4, upgraded to LR 4.1 and catolog my photo files. After this, I uploaded some photos from a SD card to a common folder (e.g. "Uploads 2012") on my hard drive using LR. This worked well. I then used Windows Explorer to drag/drop those files into their respective proper folders (there were many files on the card that were appropriate for different existing folders on my computer).
Here's where the problem starts. Prior to this uploading session, I had 297 files in a photo folder. Afterwards, I had 427 photos in this same folder. Using LR 4.1, I chose to "synchronize folder", then "import new photos" (it recognizes that there are new photos in this dialogue box). The program tells me this task is completed, but afterwards there remain 297 photos in the LR folder, and 427 photos in the location in Windows Explorer.
I am syncing pictures , effects and video snippets to a song. Why is that when I ever I add a new set of pictures or effect, it moves my music as to make space for it despite using a different layer. Is there a way to lock the music in place as I add more photos and media?
When we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
Why does the orginizer put my music files and photo files in the same folder. The file it is in is all media but shouldnt there be a music folder as well or do I have to go in and manually select each of my music files and put them into a sepeate folder or is this even possable in Photoshop Elements 12?
As I am testing more functionalities (and finishing up a video, obviously), I am trying to add a background music. For now, I used one that came with VS. I am reducing the Clip volume to 3 (I think that is 3%) and it is still too loud. If I move it down to 2, it is inaudible. Is there another adjustment somewhere? I really cannot have a background music compete with the narration!
Just upgraded from X4 to X5, and it seems something is wrong. When I click the Auto Music icon, all options are greyed out.
Okay, it's been over six months since I last used VSX4, but I don't remember having to do anything special to use Auto Music.
Computer is: Dell XPS 8300 Intel Core i7-2600 CPU @ 3.40GHz DDR3 SDRAM 8 GB Motherboard - Dell Inc. 0Y2MRG Graphics - AMD Radeon HD 6450 OS - Windows 8 Pro
I have uninstalled/reinstalled several times, and have installed VSX5 SP1.
is there a way to separate music from speech and SFX? I want to keep the music out ONLY, so I can re-write it.
I understand 5.1 has 5 channels, so are the speech & SFX separated from the music?
By the way, it's enough to have only ONE channel with ONE type of sound (i.e. music), because then I can extract it and reverse-phase it to (partially) cancel out it's equivalent from the master audio track. It's not perfect but enough.
In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
Am I doing something wrong when setting up the menu and rendering a DVD? Everything sounds perfect/ lines up when I view it in my timeline but after it is burned to a DVD the sound is off by 2-3 seconds. It's only a 15 min video.
I been searching around but other than going to the smart sound website and buying their software I do not know of any other sound software which allows me to create multilayer music for video studio. Additionally it does not appear that their software contains a plugin for Corel videostudio. So what are my options concerning creating custom music for videostudio?
I hit Automusic in X5 pro. It came on and now I can't get it to go away. Didn't mean to get it going but there seems to be no way to turn it off and get rid of the trak. Do I have to reedit this whole video starting again. There must be a way, but I just can't seem to find how to turn it off.
I even uninstalled automusic from the computer - no luck. there is a little brown line begins at 3 seconds and runs just over the video track. Is this automusic or something else?
As a newbie hopping to put video with my still images I started out by making a DVD of a video of a boat followed by the same boat after Mercali processing. Video were fine and Mercali worked as it says. How do you get a plain DVD without one of the fancy backgrounds that the program makes you chose to start the DVD which need titles and without horrible music that came from nowhere? I cannot find how to make a video with nothing at the start that goes straight into the video you have made. All I want is how to make a DVD of my videos (I can put the title on top of the video at the start) that you put into a DVD player that self starts or at worst needs you to press play on the remote control.
I have VideoStudio X3 Pro and just want to convert all my DV tapes to DVD - no background music, no fancy themes, just conversion with a menu and 15 minute automatic chapter breaks (or scene breaks using the X3 scene detection).
The only way I can test the themes provided in X3 to see if they have background music is to burn a tape to DVD. That just isn't very efficient.
how I can do this, which theme to use, or a way to adjust the theme before it burns?
I have created GPX files on my phone, loaded them into the map module and selected the corresponding photos. When I select "Auto-tag selected photos" from the pop-up menu where I loaded the track I get an error saying "No Matching Photos" I have checked the track data and the times of the photos and they do match - the track runs from 12:32 to 4:37 on 9-13-2012 and the photos were all taken within this time frame.
