VideoStudio :: Raise And Lower Volume Of Music Track
Mar 20, 2011In VSX4, when laying a background music track for a project, is it possible to raise and lower volume of sections of the track along a continuous track of music?
View 1 Replies
ADVERTISEMENT
VideoStudio :: Raise / Lower Pitch
Aug 4, 2013I am having problems using VideoStudio 15 to convert a PAL-based file to NTSC.
What I want to do is lengthen the video and to lower the tone/pitch with it (from 25 fps PAL to 23.976 fps NTSC, pull-down style).
VideoStudio :: Video Track Holding Sync With Music Track
Jan 28, 2012When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedVideoStudio :: Music Track Is Not Rendered
Apr 26, 2013I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 Replies View RelatedVideoStudio :: Equalize Audio On Music Track
Sep 30, 2013I am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
View 2 Replies View RelatedVideoStudio :: Synchronize Photos To Music Track?
Dec 9, 2011It is quite obvious you can change the duration for any individual photo display time on the video track. I also see that you can stretch or compress the music track to fit time of the slides. However, this would distort the audio track to some extent. Is it possible to select some or all of the photos and automatically set an average time so the sequence will equal the play time of the audio (ideally one file, multiples, or complete audio track)? Also, Is there an upper limit on the number of photos that can be in the video track (obviously there would be an upper size limit for a given media that would be used)? What are some of the upper limits reported and have rendering issues resulted at some poin?
View 1 Replies View RelatedVideoStudio :: Menu Background Music Volume
Sep 5, 2012The Issue: adjusting the volume of a DVD menu background music (and only that), How to.
Problem statement: Running X5 pro. Preparing a DVD disk with an introduction and 6 clips, with one main menu. Having chosen the smartscene menu template to use, the items on the menu are adjusted (sometimes the menu item needs a simple name rather than the clip file name, and specifically the name/spelling on the menu item should match whatever is in the clip it relates to), and finally the Edit tab selected to choose a different music track for the menu. The option button here allows a variety of tweaks to the music - the music selection, fade in/out, duration etc, but NOT the volume of the music when played as the menu background.
The previewed end result has significantly (twice the volume at least) louder music that the remaining clips. Disconcerting to a viewer. Now, I know there is a normalise audio button at the final burn stage to (supposedly) even out the sound variations, but I've found an issue with that (separate post on this forum recently. The short term fix is to manually even the sound levels of clips out before burning the DVD with that normalise audio button OFF). That approach does not cover the sound level of the background music for the menu, which by default is rather loud, and with no apparent means of turning the volume of it down without impacting the rest of the disk.
Also noted in preview, there is a speaker symbol permitting volume control, but by experimentation that appears to manage the volume of everything, rather than just the menu.
The question: Is there a way of adjusting the menu music sound level ONLY?
VideoStudio :: Easy Edit Sound Track - Can't Browse For More Music
Jan 31, 2011When I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
VideoStudio :: Import Own Personal Audio File Into Music Track?
Mar 6, 2013I just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
VideoStudio :: Make Audible Difference If Use Voice Over Track For Music?
Aug 24, 2011Does it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
View 3 Replies View RelatedVideoStudio :: Lower Left Channel Volume In Stereo Down-mix Stream?
Feb 6, 2012I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
VideoStudio :: Adjusting Music Clip Volume On Menu?
Feb 24, 2013adjusting the music clip volume on a menu.....I see that you can adjust the duration and fadein/out but not a volume adjustment.
View 2 Replies View RelatedVideoStudio :: Unable To Adjust Music Volume Level
Mar 12, 2011When trying to lay a music track in my project from the Auto Music library, I am unable to adjust the level of that music. Prior to laying the track the volume control is grayed-out and unavailable.
After the track is laid and the volume control is available, it has no effect on the music level in the laid track.
VideoStudio :: Adjust Video Track Volume - X6?
Apr 14, 2013I made a 4 minute video comprising 25 clips including background audio and an accompanying "Auto Music" Music track.At present the background sound of the kiteboarding video is too loud and overpowers the music.
How to I reduce the volume of the entire 4 minute video track in a single procedure? If I open Sound Mixer I only see a way to adjust individual points in each of the 25 individual clips. So changing it this way would involve a ridiculous amount of work. Ideally I would like to simultaneously reduce the background water action sound to about 25% of current lever for the entire video track. Then perhaps go back in and bump it up again in one two two spots to accentuate things. I can select the entire video track with shift/enter but then most of the menus are greyed out. Also tried splitting audio from video but it only does it for one clip at a time. Surely there is an easier way?
Background: I am new to videostudio after deciding Adobe Elements which came with my HP laptop is too complex for what I want. All I want is a simple video editing package. So that I can take kiteboarding video from a GoPro, cut it down to something worth watching and adding non copyright background sound. I can then put it on my iPad or share it to friends via youtube. So I am trialling VideoStudio X6 which seems to fit the bill. Dealing with the audio is the only bugbear I have and I want to work it out before I buy it. I cannot believe it can be so complicate to bump the background audio volume down a few notches.
AutoCAD Visual LISP / AutoLISP :: How To Raise Or Lower Z Value At Any Vertex
Aug 23, 2012I am using acad 2010. I have the ability to draw a 3d polyline on the screen with a different xyz value for each vertex using a digitizing puck. I need a lisp routine that will allow me to adjust the z value only (not the x and y values) on any 3d polyline. I just need to raise or lower the z value at any vertex and repeat if nessasary but I don't want to type it in, I want to raise/lower the z using digitizing puck (with z wheel)....example: I draw a 3d polyline which has 9 vertices with different elevations - vertex #6 is 22.6 (too high) in the z value so I need to drop it to 22.4 without typing it in. Vertex #8 is 12.2 (too low) so I need to raise the z to 12.6 without typing it in and using the z wheel on my digitizing puck. Others have tried and but this is a bit complicated and I may have not expressed it correctly.
View 2 Replies View RelatedVideoStudio :: How To Change Audio Levels (volume) Inside Song Track
Sep 20, 2011I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies View RelatedPremiere Pro :: How To Fade A Music Track In And Out
Apr 18, 2014I need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies View RelatedLightroom :: 3 - Select More Than One Music Track Slideshow?
Feb 14, 2012How do I select more than one music track for a LR3 slide show?
View 2 Replies View RelatedVideoStudio :: 6 Connecting Voice Track To Video Track During Editing?
Dec 9, 2013In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
VideoStudio :: Link Audio Track To Video Track
Jan 17, 2012I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedVideoStudio :: Push Video In Video Track After Title Track Is Completed?
Feb 16, 2011Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedVideoStudio :: How To Keep Music Locked
Sep 5, 2012I am syncing pictures , effects and video snippets to a song. Why is that when I ever I add a new set of pictures or effect, it moves my music as to make space for it despite using a different layer. Is there a way to lock the music in place as I add more photos and media?
View 9 Replies View RelatedVideoStudio :: Capturing Music From CDs In Pro X3?
Apr 23, 2013When we capture music from CD's in Pro X3, the last few seconds of the songs get cut off. Or the recording skips, cuts out a few seconds of the song right before the end, and then captures the end of the song. It's an intermittent problem with no rhyme nor reason that we can figure out as to which songs are being affected. But once a song has been captured and the end garbled, that same song will always be garbled no matter how many times we delete the recording and recapture it.
View 11 Replies View RelatedVideoStudio :: Changing HD To Lower Video Setting?
Dec 24, 2012I have a JVC Everio GZ-HM320BU HD video camera. I'm using Corel VideoStudio Pro X4.
Each year, I record our X-Mas present opening but I didn't realize that HD files get extremely large (new camera two years ago). I make DVD movies for all the kids every year, but I can't remember the process I did for 2010.
What steps do I need to do to take an existing AVCHD MTS file, (time 1:14:11, 2.44 GB, frame width 1920, frame height 1080) and change it to fit on a DVD?
If I need to change it to a non-HD format, I have no problem with that. I just forgot how I did it before.
VideoStudio :: Background Music Too Loud?
Aug 23, 2013As I am testing more functionalities (and finishing up a video, obviously), I am trying to add a background music. For now, I used one that came with VS. I am reducing the Clip volume to 3 (I think that is 3%) and it is still too loud. If I move it down to 2, it is inaudible. Is there another adjustment somewhere? I really cannot have a background music compete with the narration!
View 14 Replies View RelatedVideoStudio :: Auto Music Greyed Out
Dec 17, 2012Just upgraded from X4 to X5, and it seems something is wrong. When I click the Auto Music icon, all options are greyed out.
Okay, it's been over six months since I last used VSX4, but I don't remember having to do anything special to use Auto Music.
Computer is: Dell XPS 8300
Intel Core i7-2600 CPU @ 3.40GHz
DDR3 SDRAM 8 GB
Motherboard - Dell Inc. 0Y2MRG
Graphics - AMD Radeon HD 6450
OS - Windows 8 Pro
I have uninstalled/reinstalled several times, and have installed VSX5 SP1.
VideoStudio :: X3 - Looping Music Tracks?
Jan 22, 2013I have Videostudio Pro X3 and how to loop a music track? I have a 25 second long music clip but need it to stretch out for 2-3 minutes.
View 2 Replies View RelatedVideoStudio :: Separate Music From Speech In 5.1?
Jan 8, 2012is there a way to separate music from speech and SFX? I want to keep the music out ONLY, so I can re-write it.
I understand 5.1 has 5 channels, so are the speech & SFX separated from the music?
By the way, it's enough to have only ONE channel with ONE type of sound (i.e. music), because then I can extract it and reverse-phase it to (partially) cancel out it's equivalent from the master audio track. It's not perfect but enough.
VideoStudio :: Fading Music In The Project?
Feb 25, 2013I have assembled a project and shortened the sound track in the last segment. How exactly can I fade out that last segment only?
View 7 Replies View RelatedVideoStudio :: Sound FX And Music Clips?
Oct 5, 2012In the past using VS10+ I noticed an issue importing sound and music clips. I did import them into my project from my music folder without any problems. The issue is when I deleted the sound and music clip from my folder it disappeared from my video project and I would have to get the clip back into my music folder and keep it in there until I burned a DVD. Is this routine for VS?
View 2 Replies View RelatedVideoStudio :: Lip Syncing / Music Off After Burning DVD?
Dec 18, 2013Am I doing something wrong when setting up the menu and rendering a DVD? Everything sounds perfect/ lines up when I view it in my timeline but after it is burned to a DVD the sound is off by 2-3 seconds. It's only a 15 min video.
View 1 Replies View Related