VideoStudio :: Changing HD To Lower Video Setting?
Dec 24, 2012
I have a JVC Everio GZ-HM320BU HD video camera. I'm using Corel VideoStudio Pro X4.
Each year, I record our X-Mas present opening but I didn't realize that HD files get extremely large (new camera two years ago). I make DVD movies for all the kids every year, but I can't remember the process I did for 2010.
What steps do I need to do to take an existing AVCHD MTS file, (time 1:14:11, 2.44 GB, frame width 1920, frame height 1080) and change it to fit on a DVD?
If I need to change it to a non-HD format, I have no problem with that. I just forgot how I did it before.
View 4 Replies
ADVERTISEMENT
Feb 26, 2012
I'm having problems trying to set the video resolution on both of my copies of VS Pro X4. The captures I'm using are 16x9, and when I select a thumbnail and play it, the clip first displays as 4x3 in the preview window, then when it starts playing, it goes to 16x9, but when I put the clip in the video track, it displays and plays in 4x3... even after I change the Project Properties to 16x9, it still does the same thing.
I have recently taken some of the same files and created a 16x9 optimized MPEG in the share menu, but for some reason, I'm unable to do it again. I have had problems with my capture device, and haven't used VS Pro X4 for a while, but now I have a new methodology, and am back to working with video, again. Some of the things I did before, are now forgotten... I'm sure the answer is somewhere on this site, but so far, all of my searches and reading have only offered the things I have already done, and so far as I can tell, that doesn't work. At this point, I can't remember if the editing I did before, was displayed in 4x3 or 16x9, but the DVDs I have burned are definitely in 16x9, but the last one was definitely 4x3.
View 4 Replies
View Related
Dec 8, 2010
Eventually I can get it to work but sometimes only after many (10-20) tries. Very frustrating since it is possible - just not reliable.
When I am in Capture (Visual Studio SE DVD ver 10) and go to Options - Video and Audio Capture Settings and try and select S Video (default is Composite), it seems to take but after clicking OK and the Change Field Order window pops up and does its thing, it frequently will not 'take'. I repeat numerous times until it does take so it is possible.
Any configuration file that holds the default settings for this so I can set S Video as the default instead of Composite. Then (I assume) the problem wouldn't matter.
View 2 Replies
View Related
Jul 16, 2011
how do i add a video in the middle of timeline without changing the sync between other videos/audios in the rest of timeline ?
for example when i add a video(30sec.) at min.(1) , all the videos after min.(1) is shifted for 30 sec. , but all audios+images+titles (AFTER 1st min.) is still in it's same time , so the syncing is gone.
View 1 Replies
View Related
Nov 8, 2013
I've got an issue seeing video on video track 1 when I have something on a track above it. I have video on track 1, and above that I have a gap with a text fx placed on it (it's a lower third name key). The track indicator is located on the track with the text fx (see the attached "timeline" shot), yet all I see is that key without seeing the video below it (see attached "canvas") Everything has been rendered, so I don't understand what's wrong. And when I export the timeline, the black remains.
View 6 Replies
View Related
Aug 4, 2013
I am having problems using VideoStudio 15 to convert a PAL-based file to NTSC.
What I want to do is lengthen the video and to lower the tone/pitch with it (from 25 fps PAL to 23.976 fps NTSC, pull-down style).
View 2 Replies
View Related
Mar 20, 2011
In VSX4, when laying a background music track for a project, is it possible to raise and lower volume of sections of the track along a continuous track of music?
View 1 Replies
View Related
Feb 6, 2012
I am using Corel Video Studio Pro x4 Ultimate with SP2 and I getting significantly lower audio volume in left channel for all stereo downmix streams. The problem is consistent regardless if I make an AVCHD video with background music, or create slide show form still images with music.
I want to eliminate any possible PC setup or installation issues and narrow down the problem to program itself. I have attached sample of stereo 1 KHz 0db test tone, which could be used for this test.
1. Open new project
2. Choose Settings --> Enable 5.1 Surround sound and Wide screen 16:9
3. Import to the library few pictures and 1KHz 0dB.wav
4. Place on the time line pictures (I used 5 sec duration for display and 1 sec cross-fade transition)
5. Add 1 KHz 0 dB.wav to the Music track
6. Select Share tab --> Create Video file --> Custom
7. Choose MPEG Transport Stream .m2ts
8. Select Options --> General 1920x1080 --> 29pfs --> upper field first
9 Select Compression --> Quality 100% --> Dolby Digital Audio --> 3/2 (L,C,R,SL, RL) --> 448 kbps --> OK
4. Name the file and save it.
5. Play rendered file on 2 speaker system (TV or PC)
Playing 5.1 surround sound movies on 2 speaker (i.e. stereo) system will likely force to play Stereo downmix stream only from 5.1 sound. You then should be able to observe that the left channel volume is reduced by -14 dB. (at least this is what I get) which causes significant stereo balance shift.The same test can be done with music files, but if you want to measure the volume drop, test tone is the best way to quantify it.
View 5 Replies
View Related
Jan 2, 2014
Just made sure updates for the video card and all the hardware were current and still getting this problem where when I go to adjust a channel of video a random frame from the below channel will insert itself into the clip that I just moved as if it was married into the source footage.
Adobe Premiere Pro
Running an nVidia 660 with 331 drivers installed
Win7 64 bit ultimate
View 1 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Dec 2, 2013
Is there a way to change the default arc type in AutoCAD 2011? Currently, the ARC command defaults to "Start, End, Radius". I would like it to default to a 3-point arc.
View 9 Replies
View Related
Oct 20, 2012
Whenever I import photos the exposure and other settings are changed. I have resete every default setting I can find for any kind of preset.I tried to uninstall by dragging to the trash can (Mac OS) and reinstalled to try and clear the issue. Not sure this was the correct process as it didn't seem to wipe everything out. Don't know what setting got changed along the way. Just trying to get everything back to default so that my photos aren't arent manipulated before I can even get them to the develop module.
View 2 Replies
View Related
Nov 3, 2011
I followed the instructions in the below link where I changed the Langue settings manually in Notepad.
[URL].....
But when I open Revit after this change, I get an error message and says the licence I have in not valid and I can only use the software as a trial version. When I change back the language setting to German, this problem goes away.
Is there another way to change the language setting for Revit?
View 1 Replies
View Related
Dec 2, 2011
how can I set the default setting to 4x3? It seems to want to go to 16x9. figured out how to do it in VS3.
View 5 Replies
View Related
Jun 1, 2011
How to setup the burning speed for DVD using the Videostudio x4??? My setup menu for adjusting the speed recording wont highlight.. I've try to reinstall the software many times, but i wont get it done.
View 2 Replies
View Related
Jan 5, 2013
I can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
View 5 Replies
View Related
Sep 7, 2011
i saved a bunch of videos with this setting at the normal 29.97fps. now they are saving at 20fps per the properties in the create video file dialogue box.
View 8 Replies
View Related
Nov 11, 2010
I have VS Pro X3.
I've also purchased the Apple TV G2.
I can't find the proper export format for viewing my videos on Apple TV.
Is there a codec I need to download?
View 2 Replies
View Related
Apr 9, 2011
Using Pro X3. I capture from DV camera using DV setting. I edit in AVI project properties. When I convert to MPEG and burn to a DVD the result is not very clear-not a sharp image. Should I capture or edit in MPEG? Our projects are for Public Access TV broadcast.
View 10 Replies
View Related
May 21, 2011
I have just installed trial of VideoStudio Pro X4 and have owned the X2 version for some time already. Although I can always save a video file in HD format (1920x1180) I think it's best if the 'Project Settings' are already at this resolution. I was always able to set project resolution in version X2 but seems I can't in the new version X4. I think it's because I can only set the 'media type' to DVD in version X4. see attached picture. Is this because I only have trial version or is there less functionality in the new version?
View 4 Replies
View Related
Oct 2, 2012
if I can change the exposure or contrast, of only a portion of the take as opposed to the whole take? Also is it possible to isolate a face in one take and only change the exposure or whatever of just the face and not the rest of the scene in the take like one can with a still photo in photoshop?
View 1 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
May 7, 2011
how do I edit the default project settings? - basically - every project starts at 16x9 - and i want it to default to 4x3
View 7 Replies
View Related
Nov 1, 2012
I've created a 23-minute video I want to burn to DVD in VS Pro 5...
At the point where I select BURN in the burning process, I get hit with a message telling me that my working folder path "may not have enough space" to allowing burning. The message advises me to change the working folder path in Preferences to enable burning. The message notes the working folder path as C:Users[My initials]DocumentsCorel Video Studio Pro15.0...
That path does exist on Drive C (where there's only around 5 Gig of space left), but when I go into Preferences to change the working folder, Preferences shows it having a path on Drive F (where there's 1.47 Terrabytes of space!)
So, how can I change the working folder path to Drive F from Drive C, when the project Preferences show the working folder path to be on Drive F, the the program itself claims the path to be on Drive C (and a search shows such a path)?
I'm running under Windows 7 Home Premium.
View 2 Replies
View Related
Feb 20, 2013
I am not yet an owner for VideoStudio. This program is on my short list of software I wish to use for screen capture (creating a series of tutorials for an online classroom) and I have to be able to produce these items in a minimum of 720P 16x9 format (Ideally would like to grab at 1080P but 720 is my absolute minimum requirement). Can VideoStudio do this for me? Do I need a specific capture/video card to be able to acquire at a 720P resolution?
I have a background in broadcast television in my day job, (I edit on Quantel and Apple FCP) and what I like about this software is that it's an "all in one" solution.
PS. running Windows Vista Ultimate 64bit, 8GB RAM, NVidia GeForce9600GT card
View 1 Replies
View Related
Nov 9, 2012
Elsewhere in the forum I have a topic about sound echo, and a fix was to render a clip using the same project properties it was recorded with, at least regarding audio.
When I load X5, without a project or clip in the timeline - the project preference audio format is LPCM even tho the camcorder I use records dolby audio. I can open and edit the project preferences to change LPCM to dolby, and I can also check settings/enable 5.1 surround sound which does the same thing, but that setting won't survive an X5 program close. One would think that editing the properties like that and selecting OK at the end, the changes would have been saved and become the default. But when I next open X5, the project audio is again set LPCM.
As part of investigating the echo issue I uninstalled and re-installed X5 without any impact on the audio issues, which includes this one.
How can I set the project settings for audio so that the default is dolby and it lasts thru a close and the next X5 open?
View 5 Replies
View Related
Dec 15, 2013
I am compiling a slideshow that has a combination of still photos and videos. I have no problem changing the duration for indiviual photos. However, for the video clips, I cannot get the duration to change from the default setting for the entire slideshow. how I can change the duration for a video clip in a slideshow?
View 1 Replies
View Related
Nov 1, 2010
I recently had to reinstall Corel VideoStudio Pro X3 because of some missing/damaged files (long story). Anyway, I downloaded Title Pack 6 so I had some more, well, titles. Afterwards, when I tried to use the new titles, after moving them to the timeline and double clicking to edit the text the problem starts...
1) There is no text box to edit text or the text box is REALLY tiny (so tiny I cant resize it) and tucked away in the top-left corner of the preview box.
2) The font defaults to a ridiculously high setting (~150-200).
3) When I try to type something in, nothing happens.
4) When I click off the text box I get an error message saying "Font Apply Error!".
View 1 Replies
View Related
Jan 27, 2013
I'm trying to use the Video Studio X4 MPEG Optimizer. My problem is the Optimal project settings is grayed out. How do I get that option to work on my project. I am going through this book "Picture Yourself Making Creative Movies with Corel VideoStudio Pro X4". In Chapter 13 under Using the Mpeg Optimizer the instructions say to use that option. The project has been built in previous chapters as an ongoing project.
View 1 Replies
View Related
May 30, 2011
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
View 2 Replies
View Related
