Using Pro X3. I capture from DV camera using DV setting. I edit in AVI project properties. When I convert to MPEG and burn to a DVD the result is not very clear-not a sharp image. Should I capture or edit in MPEG? Our projects are for Public Access TV broadcast.
View 10 RepliesI am using X2. I have been capturing video from my camera with no problems. Today, I set it up again and now can't capture. When I press capture video, it runs for 10 seconds and then give a message that capture failed, file is corrupted and unusable and of course stop capturing.
I can't figure out anything that I am doing different than before when I captured successfully. I have restarted my camera, my computer, and video studio all with the same results. During the 10 seconds, I am getting video to my computer.
I enjoy the Video Studio Pro X5 over X3 and I finally got the machine to accept the driver for the samsung minidvd video camera. I selected capture video and started playing the video and hit start capture. It appears to work, but it only records and saves maybe 30 seconds of video. I did a 15 minute tour of a cave but less than 30 seconds of the video is saved.
View 14 Replies View RelatedI'm using Panasonic NVGS-25 camera + windows7 home premium + videostudio X5. When i connect my cam via FireWire, system see it and opens new window with proposition to capture video with VideoStudio, but when VS runs, it says that no devices detected or no drivers for it.
View 2 Replies View RelatedI have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
In Capture One 6.3.4, my backgrounds read 253-255. When I open the RAW file in Camera RAW 7.1, the background reads 241-245. Profile is the same (Adobe RGB).
View 1 Replies View RelatedWhy won't lightroom reconize my camera (nikon d-610) in tether mode?
View 2 Replies View RelatedI have a Canon Rebel T4i, Lightroom 4.2 running on Mac OS 10.8.1. When I connect the camera to the computre and select Tethered Capture, I see the camera name in the tethered capture window, but the values for the settings are "--". When I mouse over the shutter button, the curson becomes a gloved hand with pointed finger and if I click on the shutter button it changes shade, but does not fire. When I look in the view finder, "Busy" flashes and I can't use the camera shutter.
View 4 Replies View RelatedCan I add the time and date to a capture it is on my camera and will only show if I was to print but not when I send by e-mail. I have a FujiS5Pro and use Elements 7 the pictures taken will go to UK Courts and used as evidence in our Legal system.
View 4 Replies View RelatedI just installed Light room 5 and try to use the tether funtion from Light room 5. But it shows "No Camera Detected" I checked the USB cable and it is connected correctly. Is there any solutions to fix that? Or Lr 5 does not suport Nikon D3000?
View 2 Replies View RelatedIs is possible to include the camera WB setting (e.g. daylight, cloudy etc, or temp K) in the LR metadata?
View 1 Replies View RelatedWhere to set this preference in Camera RAW? This note is from the Lightroom 4 ReadMe. I can't seem to fine prefs for "Camera RAW."
Viewing Lightroom settings in Camera Raw
Before working in conjunction with Lightroom and Camera Raw please set the Camera Raw preference to: Save image settings in: Sidecar ".xmp" files. By default Camera Raw will display the image adjustments exactly as performed in Lightroom‟s develop module.
using the White Balance Tool in Camera RAW.I have sometimes heard that I need to select a naturally white point (as opposed to a specular / highlight point); but I have also heard that I need to select a neutral gray point.
View 2 Replies View Relatedi made a plane of 100m by 50m but it is not completely visible in pres view. I there any camera setting?
View 1 Replies View RelatedIs there a way to import my raw file with the camera picture settings from my camera. I use a personally edited version of the camera vivid from my d300. The files are imported without the settings and get set to adobe standard in my camera calibration. I use lightroom 4 with cs5 64 bit.
View 4 Replies View RelatedI have Ulead Videostudio 9. I am trying to capture from a DVD and following the manual instructions all goes OK up to the Import step. At that stage I get an error message "Temporary working forder does not exist. Report ID 0x8004083d(2109)" First time I have tried to capture stuff from a DVD. Program still works fine on all other aspects. I have checked the closed Ulead Forum and FAQ's but can find no solution. Is there anything I can do?
View 4 Replies View RelatedNo Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
My capture card is a BlackGold BGT 3620 (which doesn't come with capture software). I had been using VideoStudio Pro X3 to capture VCRs through its analogue input (using S-Video) with no problems. However, I recently re-installed Windows (nothing different, it had just stopped working), and decided to give the trial version of VideoStudio Pro X4 a shot. When I go into the capture panel and click on "Capture Video", the "Source" field is blank, and the program completely hangs, so I have to kill it.
Of course, I can go back to X3, but sooner or later, it will no longer be supported, or there'll be some other reason I'm forced to upgrade, so I'd rather get this working.I tried running it as admin (although X3 used to work fine without it).
here's my set-up:
Mobo: ASUS M4A79T Deluxe
RAM: 8 GiB DDR3
GPU: Palit NVIDIA GeForce GTS 250 (driver V. 275.33)
HDD: 3 x 160 GB 7200 RPM SATA II
OS: Windows 7 Ultimate x64. All service packs, updates, etc., installed.
Capture Device: BlackGold BGT 3620 (driver V. 8.1.0.0)
Capture Media: UK PAL VCR, from standard VCR player, through S-Video
Is it possible to capture from a file using VS Pro X2? I'm trying to get an AVI file into my timeline. Can I capture the file or do I Import it to video clips and then drag it into the timeline.
View 7 Replies View RelatedI've got USB 2.0 AV Grabber (STLab) which came with Video Studio
I'm trying to copy VHS cassette footage onto disk.
I capture the audio track, but no video.
When I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode
Check if your video capture driver is working properly
15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied.
- PC is an intel i5 2500 on a Asus P8P67 Pro motherboard.
- 64 bit Windows 7 Home premium all patches applies
- Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
So what is a good reliable capture device that works with X3 and won't mess up on me? I've looked at ezcap, the real one, and I'm still not sure. BTW it has to be USB as I use my laptop.
View 10 Replies View RelatedI tried to use the trial version of VS 11plus with a Honestech Vidbox NW03 video capture device. I wanted to use VS11plus because I was unhappy with the video quality of Honestech VHS to DVD software. The VS wouldn't allow me to use the Vidbox even after uninstalling the Honestech software. I also tried using VS after uninstalling the Vidbox software. The only device that ever worked with VS for me was a Easy cap. Is Easycap the only device that works with VS or did I do something wrong? I have Vista Home Basic, 2.16GHZ, 3GB Ram and 250GB Hard drive on my laptop.
View 7 Replies View RelatedI have ION video 2 pc mkll. When I try to capture i cant get a preview. Have tried to change settings with no luck. The drivers for it 10 but no preview show up.
View 8 Replies View RelatedI first used the above on a trial basis and had no problems. Then I bought it and I cannot capture my video. I get the no video capture device installed. I have tried 2 different cameras, computers, video capture drivers, firewires and I uninstalled and reinstalled Studio 12 in addition to installed a trial Pro3. I also uninstalled other devices like Flip Software as was suggested by a Corel support person. I am using Windows XP.
View 1 Replies View RelatedI have a new issue with screen capture in VS pro x6. When I try to capture the sound from my computer i.e. a clip on (you tube) when I hit the record button (the red circle) I get this message:
it counts 3-2-1 then…at 1 (Prepare Record Failed!!! #15)
However it works fine if I disable it… when I record my voice when it is screen recording, no problem.
Also, when I try to record a game play, full screen, it stops once I launch the game, a message says that my screen capture is complete without me hitting the stop capture button!!
My computer is running win 7 Prem. Service pack 1 64 bit 12 GB RAM Intel core i7 @ 3.40 GHz
How do I set Camera Raw preference to: Save image settings in: Sidecar ".xmp" files?
View 11 Replies View Related