So what is a good reliable capture device that works with X3 and won't mess up on me? I've looked at ezcap, the real one, and I'm still not sure. BTW it has to be USB as I use my laptop.
View 10 RepliesI have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
What I am proposing to do is this: I have been asked to do the video for a friend's wedding. I would like to use a seperate audio recorder to record the audio of the wedding while I do the video on my camcorder. Then import the seperate audio track into VS X4 and sync it up with the video. The reason I am going to this extra trouble is that the built-in microphones on my camcorder are not that great unless I am "up close and personal" with the subject of the video. I have tried a short clip using an old MP3 player that records mono sound files and it appears to work well for the short video clip. What about with a longer clip, say up to an hour? If so, were there any problems keeping the video and audio tracks in sync?
View 2 Replies View RelatedI produced a 4-track project which contains video, video-overlay, background music and a voiceover narration. I produced it in high-def.Everything plays on a pc and on a tablet but when played on a mobile device the narration is not heard.
I have made several projects this way and everytime I go to play the video on a cell phone you cannot hear my narration.
I have Ulead Videostudio 9. I am trying to capture from a DVD and following the manual instructions all goes OK up to the Import step. At that stage I get an error message "Temporary working forder does not exist. Report ID 0x8004083d(2109)" First time I have tried to capture stuff from a DVD. Program still works fine on all other aspects. I have checked the closed Ulead Forum and FAQ's but can find no solution. Is there anything I can do?
View 4 Replies View RelatedNo Audio when capturing in VSX5. Also After I install the application any ac3 file or movie with ac3 audio will not play the audio.
View 8 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
I just bought VSx4 but I noticed it crashes as soon as I try to capture
my camera: canon HV20 -firewire connected
my OS: windows 7
I already:
uninstalled, re-installed VSx4
turned off/pc - camera
connected/disconnected camera
since I installed vsx4 I can't capture in vs x3 too.
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
My capture card is a BlackGold BGT 3620 (which doesn't come with capture software). I had been using VideoStudio Pro X3 to capture VCRs through its analogue input (using S-Video) with no problems. However, I recently re-installed Windows (nothing different, it had just stopped working), and decided to give the trial version of VideoStudio Pro X4 a shot. When I go into the capture panel and click on "Capture Video", the "Source" field is blank, and the program completely hangs, so I have to kill it.
Of course, I can go back to X3, but sooner or later, it will no longer be supported, or there'll be some other reason I'm forced to upgrade, so I'd rather get this working.I tried running it as admin (although X3 used to work fine without it).
here's my set-up:
Mobo: ASUS M4A79T Deluxe
RAM: 8 GiB DDR3
GPU: Palit NVIDIA GeForce GTS 250 (driver V. 275.33)
HDD: 3 x 160 GB 7200 RPM SATA II
OS: Windows 7 Ultimate x64. All service packs, updates, etc., installed.
Capture Device: BlackGold BGT 3620 (driver V. 8.1.0.0)
Capture Media: UK PAL VCR, from standard VCR player, through S-Video
Is it possible to capture from a file using VS Pro X2? I'm trying to get an AVI file into my timeline. Can I capture the file or do I Import it to video clips and then drag it into the timeline.
View 7 Replies View RelatedI've got USB 2.0 AV Grabber (STLab) which came with Video Studio
I'm trying to copy VHS cassette footage onto disk.
I capture the audio track, but no video.
When I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode
Check if your video capture driver is working properly
15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied.
- PC is an intel i5 2500 on a Asus P8P67 Pro motherboard.
- 64 bit Windows 7 Home premium all patches applies
- Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
I tried to use the trial version of VS 11plus with a Honestech Vidbox NW03 video capture device. I wanted to use VS11plus because I was unhappy with the video quality of Honestech VHS to DVD software. The VS wouldn't allow me to use the Vidbox even after uninstalling the Honestech software. I also tried using VS after uninstalling the Vidbox software. The only device that ever worked with VS for me was a Easy cap. Is Easycap the only device that works with VS or did I do something wrong? I have Vista Home Basic, 2.16GHZ, 3GB Ram and 250GB Hard drive on my laptop.
View 7 Replies View RelatedI have ION video 2 pc mkll. When I try to capture i cant get a preview. Have tried to change settings with no luck. The drivers for it 10 but no preview show up.
View 8 Replies View RelatedI first used the above on a trial basis and had no problems. Then I bought it and I cannot capture my video. I get the no video capture device installed. I have tried 2 different cameras, computers, video capture drivers, firewires and I uninstalled and reinstalled Studio 12 in addition to installed a trial Pro3. I also uninstalled other devices like Flip Software as was suggested by a Corel support person. I am using Windows XP.
View 1 Replies View RelatedI have a new issue with screen capture in VS pro x6. When I try to capture the sound from my computer i.e. a clip on (you tube) when I hit the record button (the red circle) I get this message:
it counts 3-2-1 then…at 1 (Prepare Record Failed!!! #15)
However it works fine if I disable it… when I record my voice when it is screen recording, no problem.
Also, when I try to record a game play, full screen, it stops once I launch the game, a message says that my screen capture is complete without me hitting the stop capture button!!
My computer is running win 7 Prem. Service pack 1 64 bit 12 GB RAM Intel core i7 @ 3.40 GHz
I am using VSX4 and I wonder is it possible to capture the computer screen with this version? If not will any of the newer versions that will capture the screen? If not do you know of a program that will do that?
View 10 Replies View RelatedI have a large video file I am trying to render in VS pro X3. The source file is about 3.4 gig. (VHS capture to MPG) I have trimmed out small pieces and inserted a title and a few transitions and I am now trying to rerender it. the process gets to 9% and freezes. No error. It just freezes.
I am trying to output to NTSC DVD 4:3 format.
Is there any way to schedule video capturing with this software ? For example, can I automate it to capture daily at a certain time for a fixed duration or can this only be done manually ?
View 1 Replies View RelatedI am having a bit of trouble with the Ulead Video Studio 10.0 Program I am trying to record Xbox 360 Gameplay and I have the picture both on the TV screen and Laptop. But when I try to record it says "Cannot Start Capture Graph". that i can start recording.
View 2 Replies View RelatedI am having difficulty finding basic instructions for VS Pro X3. I transferred a film from my friends PC to my mobile drive. The film is avi format. I choose import from digital media, but cannot move it to the editing screen.
View 3 Replies View RelatedI have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
Is it possible to Capture in MPEG FORMAT with Pro X4?
It was possible with Pro X2 but not with Pro X3.
Been using VidoeStudio Pro X5 for couple years and just picked up a used PC. It had XP and could capture with installed VS X5 with no issues. Today i upgraded to Windows 7, reinstalled VS X5 and cant get past the "Unable to switch Capture" error. I can capture using my Canon Vixia HV40 and Sony FX1000 via Firewire with no problems using HDV Split, Roxio Creator and Cyberlink Powerdirector, so problem must be somewhere with VS X5.I can "control" the camera (stop, play, rewind,etc) through VS X5, but the Capture and Option buttons are grayed out and no image in preview window.
I have tried googling and downloaded a few codecs and drivers but no joy. Naturally I have rebooted and tried fresh install as well
I have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies View RelatedI am using VideoStudio 11 for my capture software. what capture hardware is compatible with my software. I have Dazzle DVD recorder plus and Hauppauge USB-live-2. VideoStudio 11, will not work with either of these devices. When using the Hauppauge hardware I get the following error message: 15023:4:2, unable to switch to capture mode. .
View 3 Replies View RelatedRecently purchased VS PRO X4.Firstly very glad that I did as it includes lots of features that I once longed for (previous versions I have are VS9 and VS10).
Cannot start the capture graph..I have read another post from a user who also experienced this problem but after reading the replies I could not find a fix for me.I have PRO X4 installed both on my notebook (for use when on vacation) and on my desktop PC.NOTE that I do NOT experience the problem on my notebook.
Today when I attempted to capture video (for the first time) from my Vidcam using my desktop PC I get the error.I am capturing to DV.I do NOT have any problem capturing from the same VIdcam using VS9 on the same PC.
I have some mini dv tapes that seem to have been shot in: 4:3 720x480,DVD, Variable BitRate
I am currently in the capture video section of VideoStudio and wanted to know what is the highest quality capture format for these tapes.
From the video studio drop down it says that i can capture in the following:
DVD
DV
Mpeg
VCD
SVCD
Also under options> Video options
It has a bunch of Video profiles, should i change any of those?
My final output will be onto Standard DVDs
So my questions are:
1- What is the best above format to capture in?
2- Should i change the video options profile?
3- Ideally I would love to have the video shown/edited in 16:9 is that possible considering it was shot inf 4:3? If 16:9 is possible should i capture it differently to achieve 16:9?
I'm trying to capture game video and am only getting 15 fps. Is there a way to change this setting?
I've looked in the pdf manual, the menus and can't find any information on this.
I tried searching the forums for "capture" and "screen capture" but those words a flagged as "too common"