Recently purchased VS PRO X4.Firstly very glad that I did as it includes lots of features that I once longed for (previous versions I have are VS9 and VS10).
Cannot start the capture graph..I have read another post from a user who also experienced this problem but after reading the replies I could not find a fix for me.I have PRO X4 installed both on my notebook (for use when on vacation) and on my desktop PC.NOTE that I do NOT experience the problem on my notebook.
Today when I attempted to capture video (for the first time) from my Vidcam using my desktop PC I get the error.I am capturing to DV.I do NOT have any problem capturing from the same VIdcam using VS9 on the same PC.
I am having a bit of trouble with the Ulead Video Studio 10.0 Program I am trying to record Xbox 360 Gameplay and I have the picture both on the TV screen and Laptop. But when I try to record it says "Cannot Start Capture Graph". that i can start recording.
I have the VS X3 version and am trying to capture a VHS tape to VS. I'm using the ION "Video 2 PC" capture card and I have hooked up the 3 RCA cables (red, white and yellow) to the capture card and then via a USB port attached the capture card to the computer. The USB device is recognized in Source by VS X3 and is called "USB 2861". The Format automatically is automatically set to "DVD". The capture video icon is blinking and when I click it to capture, I get the error message "cannot start the capture graph". I can't go any further from this point. what I should do or check or what this error message means?
I have Corel VideoStudio Pro X3 as well as the trial version of X4 which I have just downloaded. I am having the same problem with both versions. When I go into Capture, there is no image coming through the Capture Window, it is just black. When I hit Capture Video, it does start capturing and it does record video correctly, however when I stop capturing, the preview window turns black again.
How can I get the video to be seen in the Capture preview window?
My computer is Windows 7 Ultimate 64 bit edition. I am using a USB capture device, the Diamond Multimedia VC500 One Touch VHS Video Capture USB 2.0.
Illustrator can make graphs with lines and bars / columns, for example from the docs: [URL] .....
However, when I create a graph like this, I seem to lose the ability to manually set the value axis using "override calculated values".
To reproduce this problem: Create a graph like the example, with bars and an axis on the left, lines and an axis on the right. Unlike the example, don't fix the numbers so the lines match up neatly - have one side go up to just under 20, one up to just under 250, so there are mismatched markers and numbers of divisions on each side.Try to make the markers and numbers of divisions match up, so the side that goes up to 20 actually goes up to 25 and has the same number of divisions as the other side.Everything I've tried doesn't work:
If I select the whole graph and go to 'Graph Type', I can't set Value Axis options. In earlier versions it's greyed out, in CS6 I can access it but clicking 'Okay' does nothing.If I select the whole graph and chose one graph type, I can set the Value Axis options, but that selected graph type then applies to the whole chart,If I use the Group Selection tool to select one of the series, and open 'Graph Type' options, changing the Value Axis options has no effectIf I use the Group Selection tool to select all series that share an axis and open 'Graph Type' options, changing the Value Axis options still has no effectIf I use the Group Selection tool to select the axis ticks group itself, or the axis line and axis ticks groups themselves, or the axis labels, axis line and axis ticks, or the axis labels, axis line, axis ticks and associated data series, etc, changing the Value Axis options also has no effect
It seems like this feature is broken and it seems like the example in the manual was carefully chosen to use a rare combination of numbers where it would actually look right.
When I insert new data on an existing graph (for example, just adding a new year of data) and press insert, it just deletes the graph entirely. My only option is to recreate the entire graph which is frustrating because I lose its format and colors.
Situation - running VS10 and have been for a while now. However for some reason recently I've failed to manage to capture video from my Panasonic NV-GS11 mini-DV. The error is simply "Failed to build a preview graph".
I've checked and re-installed the VS10 SP1, as well as the Vista patch someone mentioned in one topic here I did find, but so far no change. I'm just a bit leery of something that has worked fine in the past, but for some reason that's changed...
I'm totally new to Illustrator and want to use the line graph tool to insert a graph that passes through 0,0 and runs to 24,24. I want the x and y axes to meet at the origin. As it isn't working as you can see. I've used 0, 0 and 24, 24 as my data points. Is there any way I can change how this is presented so it's clear that it's at the origin?
I have Ulead Videostudio 9. I am trying to capture from a DVD and following the manual instructions all goes OK up to the Import step. At that stage I get an error message "Temporary working forder does not exist. Report ID 0x8004083d(2109)" First time I have tried to capture stuff from a DVD. Program still works fine on all other aspects. I have checked the closed Ulead Forum and FAQ's but can find no solution. Is there anything I can do?
I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
For convenience, I use my video camera for both video and taking still pictures. For video I use use a wide frame 16:9 while capturing stills I use a standard frame 4:3 (the standard frame allows a higher megapixel). I use VS X2 for creating my home DVD's and I use Photostory 3 for my slide shows.
I've never used the still capture function on VS until today. I needed a couple of stills from the video to match with the continuity of my slide show.
I realised that my screen capture would be wide screen but I figured I could edit the photo and crop it to 4:3. What actually happens is that VS X2 captures the image and squeezes it to 4:3 so in the end I get these long images!
I am using VS X6 ultimate that I purchased yesterday
I am capturing videos from VHS tape using an S-Video connection
I have tried different capture options settings and the capture always saves in MPEG
I believe that AVI has the least loss and would prefer to save in the AVI format since I intend to do some editing of the original content The end objective will be to burn reults to DVD
Can VS X6 capture files in AVI? If so, what settimgs should I use? Any settings that would be best for this type of transfer to HDD?
My capture card is a BlackGold BGT 3620 (which doesn't come with capture software). I had been using VideoStudio Pro X3 to capture VCRs through its analogue input (using S-Video) with no problems. However, I recently re-installed Windows (nothing different, it had just stopped working), and decided to give the trial version of VideoStudio Pro X4 a shot. When I go into the capture panel and click on "Capture Video", the "Source" field is blank, and the program completely hangs, so I have to kill it.
Of course, I can go back to X3, but sooner or later, it will no longer be supported, or there'll be some other reason I'm forced to upgrade, so I'd rather get this working.I tried running it as admin (although X3 used to work fine without it).
here's my set-up:
Mobo: ASUS M4A79T Deluxe RAM: 8 GiB DDR3 GPU: Palit NVIDIA GeForce GTS 250 (driver V. 275.33) HDD: 3 x 160 GB 7200 RPM SATA II OS: Windows 7 Ultimate x64. All service packs, updates, etc., installed. Capture Device: BlackGold BGT 3620 (driver V. 8.1.0.0) Capture Media: UK PAL VCR, from standard VCR player, through S-Video
Is it possible to capture from a file using VS Pro X2? I'm trying to get an AVI file into my timeline. Can I capture the file or do I Import it to video clips and then drag it into the timeline.
When I connect my camera and select Capture Video, I receive the error:
Unable to switch to capture mode Check if your video capture driver is working properly 15023:4:2
I select OK and it properly identifies my camera in source as Canon HV30
Using the VS Pro X3 software, I can play, ffwd, pause, etc the camera however, it will not Capture the video at all
This is on my dads pc. he is running:
- Video Studio Pro x3 Pro which has had all patches applied. - PC is an intel i5 2500 on a Asus P8P67 Pro motherboard. - 64 bit Windows 7 Home premium all patches applies - Canon HV30 connected via firewire
Note, I have used this camera with VS Pro x3 on another pc with no issue.,
not sure if i have got a setting applied incorrectly in vs pro x3 or not.
So what is a good reliable capture device that works with X3 and won't mess up on me? I've looked at ezcap, the real one, and I'm still not sure. BTW it has to be USB as I use my laptop.
I tried to use the trial version of VS 11plus with a Honestech Vidbox NW03 video capture device. I wanted to use VS11plus because I was unhappy with the video quality of Honestech VHS to DVD software. The VS wouldn't allow me to use the Vidbox even after uninstalling the Honestech software. I also tried using VS after uninstalling the Vidbox software. The only device that ever worked with VS for me was a Easy cap. Is Easycap the only device that works with VS or did I do something wrong? I have Vista Home Basic, 2.16GHZ, 3GB Ram and 250GB Hard drive on my laptop.
I have ION video 2 pc mkll. When I try to capture i cant get a preview. Have tried to change settings with no luck. The drivers for it 10 but no preview show up.
I first used the above on a trial basis and had no problems. Then I bought it and I cannot capture my video. I get the no video capture device installed. I have tried 2 different cameras, computers, video capture drivers, firewires and I uninstalled and reinstalled Studio 12 in addition to installed a trial Pro3. I also uninstalled other devices like Flip Software as was suggested by a Corel support person. I am using Windows XP.
I have a new issue with screen capture in VS pro x6. When I try to capture the sound from my computer i.e. a clip on (you tube) when I hit the record button (the red circle) I get this message:
it counts 3-2-1 then…at 1 (Prepare Record Failed!!! #15)
However it works fine if I disable it… when I record my voice when it is screen recording, no problem.
Also, when I try to record a game play, full screen, it stops once I launch the game, a message says that my screen capture is complete without me hitting the stop capture button!!
My computer is running win 7 Prem. Service pack 1 64 bit 12 GB RAM Intel core i7 @ 3.40 GHz
I am using VSX4 and I wonder is it possible to capture the computer screen with this version? If not will any of the newer versions that will capture the screen? If not do you know of a program that will do that?
I have a large video file I am trying to render in VS pro X3. The source file is about 3.4 gig. (VHS capture to MPG) I have trimmed out small pieces and inserted a title and a few transitions and I am now trying to rerender it. the process gets to 9% and freezes. No error. It just freezes.
Is there any way to schedule video capturing with this software ? For example, can I automate it to capture daily at a certain time for a fixed duration or can this only be done manually ?
I am having difficulty finding basic instructions for VS Pro X3. I transferred a film from my friends PC to my mobile drive. The film is avi format. I choose import from digital media, but cannot move it to the editing screen.
I have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
