how do i add a video in the middle of timeline without changing the sync between other videos/audios in the rest of timeline ?
for example when i add a video(30sec.) at min.(1) , all the videos after min.(1) is shifted for 30 sec. , but all audios+images+titles (AFTER 1st min.) is still in it's same time , so the syncing is gone.
I could not find anything on this. Is it possible to insert a video clip into the middle of a project? I have tried inserting a video and it always adds it to the end of the project not where I want it to go.
View 2 Replies View RelatedI've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
I am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
I purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard
Intel Core 2 DUO 2.66GHz
3 GB DDR2 800 MHz Ram
Nvidia GeForce GT220
Asus Xonar DG 5.1 Sound Card
Hard Drive: 2- 320 Gb drives
Monitor: eMachines E2024
WinXP SP3
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
View 5 Replies View RelatedI have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
I recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
I am using VS 10 and I have successfully captured all the video needed for this project (DV format). My project is an interview where I used 2 cameras during the recording session. On one camera I used a microphone and I want to use that audio throughout the project for consistency. At the beginning of the session I recorded a timer from my laptop screen to better sync the video during editing.
I placed one camera video on the video track and the other on the overlay #1 track. I moved the overlay clip so it matched the frame of the timer on the video track. The 2 tracks synched up perfectly. How to cut back and forth from the second camera. I extracted the video track audio to the audio track thinking I could just cut the video track and the overlay track and slide the overlay track up to the video track. But, it won’t let me cut the overlay track. By the way, while not an expert,I am also not a first time user with the software as I have made a number of projects over the years.
I was following the old instructions on the recommended way of working with UVS10+ re DVD creation, i.e. do the work on the project save as a video file then come back into UVS10+ with a new project with nothing in the timeline (old computer Win XP, for burning I have a video editing profile) when ready to go into burn phase. In burn phase did the title, added transitions between the 10 clips, let UVS10+ auto add chapters between clips.
Kept all burn phase properties the same as the original, with smart render (no re-render of compatible MPEG2).
Burnt it on to a DL disc, all seemed hunky dory (but took ages to do the title) until came to play it, and then I found that the sound had gone progressively out of sync on the DVD.
The video files are kept on an external hard drive connected via USB. To be honest the old XP computer does run very slow now, as they all do with time as leeches attach themselves and drain speed and resources.
My question is what are the usual suspects for sync problems ? Data transfer from external hard drive ? Project settings in burn phase different from edit phase ?
Would it be better to create an iso on the internal C-Drive, then burn from the iso ? NB whatever USB port I attach devices to front/rear etc. I have always got the message this device can run faster, searched the net tried all the tips to no avail.
However this did not prevent me from creating single layer DVDs without sync problems in the past using this set-up/way of working, but PC is way slower now.
I guess the PC's effective speed might be in the frame ? How far back will the 'rot' go ?
Should I go as far back as putting the converted clips into the time line in the edit phase (totally new project), or will the VSP project/video files be ok, i.e. problem at data transfer/burn stage.
I'm thinking about re-doing the XP user profile to ensure that later installs have not cluttered all the profiles on the machine, i.e. including the video editing profile.
Using Pro X4
I have a video file, I have an audio file. Video is loaded in the video track, audio in the Voice track.
HOW in the ... do I sync them? I have the mixer on, I can see the wav graphics, I can see where I want them to line up but either the Video track must slide forward ( and it won't, it's locked on 0 ) or the audio track must slide backward (but it won't slide below 0 start) I've tried splitting, clipping... I can't get it cut just right. All I want is time frame 0 for the video to start at positive time frame within the audio.
I am having problems exporting my AVCHD file to my hard drive. The original file works fine in the preview window, but then exports as a very jerky video. The program I am using is VSX4 Ultimate, and there are no more updates available.
The video I am trying to export came from a camcorder SD card and has these properties:
File format: NTSC HDMV
Video Type: H.264 Video
Attributes: 24 bits, 1920 x 1080, 16:9
Data Rate: Variable bit rate (Max 26000 kbps)
Audio type: Dolby Digital Audio
Audio Bit rate: 256 kbps
Here are the project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
My goal is to export the video to my computer and have it look as good as it does in the preview.
I'm trying to edit a music performance shot with multiple cameras, both video and still, using VS X4. I'd like to e.g. insert (full-screen pan & scan) still pictures into the video stream with video cross-fading in and out, but I cannot find a way to get a satisfactory end result without breaking audio/video synchronization.
I've tried the following:
a) Put the picture on the overlay track. If I now put cross-fades on the overlay track, the fades are to/from black, not between main track video and overlay still, which is not the desired result. It is expected functionality, though, so no bug there.
b) Put the picture on the same (main) track with the video. First, I split the audio to a separate audio track to keep it intact. Then I split a piece of video out using chapter markers as guides and replace the cut-out piece with a still picture of equal duration. So far audio sync remains fine. But if I now insert cross-fades into the main track, it gets out-of-sync with the audio with every cross-fade (video gets shorter, probably to compensate for the audio missing in the still pictures?), and it is really cumbersome to manually repair sync after every transition.
Would there be any way to get cross-fades in for multi-camera processing without messing audio synchronization? Some nice function key (press CTRL/SHIFT/ALT etc. while dropping the transition onto the overlay track to force it to process between the overlay and the main video track instead)?
I'm currently working on a video that has alot of individual pictures etc in the timeline. I would like to delete a few of the pictures from the video. when I delete the pictures I get an opening in the video that I don't wish to have. How do I shift the entire video over to fill that gap? On the flip side of the coin. Is there a way to insert a clip into the timeline and shift everything down around the inserted clip?
View 3 Replies View RelatedI'm running X4. I have 3 minutes of photos with text and audio narrative at the beginning of my project. When I try to add the first video clip to let's say 3:01 of the project, the video track pins itself to 0:00...I don't see how to set it free...
View 2 Replies View RelatedI'm VERY new at Corel Videostudio Pro X3.How do I move the video track in the timeline? I can't make it work unless the clip is in the overlay track.
View 7 Replies View RelatedI am a new VS6 user (coming from Pinnacle Studio). Is there a way to display the video and the video's audio waveform on the timeline at the same time. I see where I can select the Sound Mixer button above the timeline, which does show the audio waveform, but then the video thumbnails disappear.
2nd question, when I put a fade-to-black transition between two clips, it seems like the clips' audio does not get faded out then in with the next clip. Do I have to add a separate audio fade for every video fade?
Is it possible to export a part of the timeline to a new video file?
So if I have a 10 min video in the timeline, I would like to "mark in" and "mark out" from 3m02s to 5m30s, and create a new file.
I used to use Edius I could mark in and mark out from time to time and export to a new video file. Is there a workaround in Videostudio ?
I'm editing a training video, and would like to export different "chapters" to seperate video files, so I can upload the seperate videos to the web, and not have to export the entire video, as this would be too big.
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies View RelatedI downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies View RelatedWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedI have a JVC Everio GZ-HM320BU HD video camera. I'm using Corel VideoStudio Pro X4.
Each year, I record our X-Mas present opening but I didn't realize that HD files get extremely large (new camera two years ago). I make DVD movies for all the kids every year, but I can't remember the process I did for 2010.
What steps do I need to do to take an existing AVCHD MTS file, (time 1:14:11, 2.44 GB, frame width 1920, frame height 1080) and change it to fit on a DVD?
If I need to change it to a non-HD format, I have no problem with that. I just forgot how I did it before.
for some reason my video in AE that i am rendering is not in sync audio wise however i have the original file and the audio is fine. why is it that in AE the video is not in sync?i previewed it many time in different scenes however when the video hits about 2mins the video suddenly becomes off synceven tho the original video i have isnt.
View 5 Replies View RelatedKelby's book shows how to edit a video in Develop by Capturing a Frame, then opening the Frame in Develop mode, selecting the video, and turning on Auto-Sync so that changes to the photo will also change the video. Not all edits are possible. I was hoping that cropping with the Rectangle tool would work, so I gave it a try. No luck. Indeed, LR5 tossed up an debugger-style error message.
An internal error has occurred. ?.0: attempt to perform arithmetic on a nil value.
After importing my mp4 video into Premiere Pro, the audio plays perfectly, but the video is out of sync and plays as if though it's in slow motion.I've been using this software for about 4 months and have encountered this problem within the last few weeks.
View 13 Replies View RelatedI have been editing on Premiere and just recently encountered this problem: the video and audio get out of sync AFTER I have imported my media into the program. I have been importing my media in the following process:
I upload the media from my SD card in my camera onto my computer.I watch the media in QuickTime and it plays perfectly. Nothing is out of sync and everything plays in normal time.I create a new project in Premiere and import the media from my computer into the new project.I go to play the media back and start editing, and find the video and audio are out of sync. The video is playing extremly slowly and the audio is playing perfectly fine. I have played around with the speed and duration of just the video (not the audio) and all it does is create weird skips in the video. I have also tried exporting the media to see if it would somehow render itself out, but nothing seems to work. The problem is not with the camera or the original media.
This is how the video looks when I play it straight from QuickTime after uploading the media onto my computer from the SD card.
I'm using PS CS6 13.0.5 x64 on Snow Leopard (iMac 27" late 2012). I tried to change the text engine to Middle Eastern, but after I restart PS, the program is nearly non-responsive, and it takes forever to edit text. Changing it back to East Asian solves the problem, but then again, I want to use the Middle Eastern feature...
When I use Illustrator CS6 I don't have such problems (although I have to write backwards, since there is no support for right-to-left in Illustrator in my version)
I'm starting with the corrected JPEG and then highlighting the original video so they are both selected, but the JPEG settings are not applied to the video when I Sync Settings -- things like color, sharpening, and noise reduction.
View 4 Replies View RelatedI've been using Xsplit to record games while I play. I recorded a ~2 hour video and toward the beginning of the video it seems to be pretty a-okay but later in the video when I play it in premier pro, the audio starts falling out of sync.When I play the original raw video the audio and video are both on time.
I read somewhere that the reason why the audio was out of sync was because xsplit uses a "variable framerate".
Not sure if this is true or not, but regardless, I tried exporting numerous times and the audio STILL falls out of whack. I looked on xsplit and there was a setting that i could enable to force constant frame rate..