VideoStudio :: AVCHD Video Exports As Laggy Out Of Sync Movie
Dec 8, 2011
I am having problems exporting my AVCHD file to my hard drive. The original file works fine in the preview window, but then exports as a very jerky video. The program I am using is VSX4 Ultimate, and there are no more updates available.
The video I am trying to export came from a camcorder SD card and has these properties:
File format: NTSC HDMV
Video Type: H.264 Video
Attributes: 24 bits, 1920 x 1080, 16:9
Data Rate: Variable bit rate (Max 26000 kbps)
Audio type: Dolby Digital Audio
Audio Bit rate: 256 kbps
Here are the project properties:
NTSC drop frame (29.97 fps)
MPEG files
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 16:9
Video data rate: Variable (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
My goal is to export the video to my computer and have it look as good as it does in the preview.
View 4 Replies
ADVERTISEMENT
Jun 8, 2011
I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?
View 2 Replies
View Related
Jul 28, 2013
I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.
View 14 Replies
View Related
Feb 2, 2011
I am using VS2 and have been working on creating a "hybrid DVD" AVCHD video. I have a Canon HD video camera and an HP computer (w/regular DVD burner) with an i7 quad. Hybrid DVD is played on a Bluray player and HD TV. Everything is working well with editing the clips etc... Rendering has gone well with no real problems. I recorded video at the highest setting 24 Mbps. When I click on properties for a (m2ts) clip in the timeline it indicates 21,0000 to 22,000 Kbps that seems normal. I than go directly to the burn step (Create disc>AVCHD) and proceed to burn the disc at 4X. When I click on the middle icon (thumbwheel) these are the properties:
MPEG files
24 bits, 1920 x 1080, 29.97 fps
Upper Field First
(HDMV-NTSC), 16:9
H.264 Video
Video data rate: Variable (Max. 18000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
These settings seem normal to me. Also, the "do not convert compliant......" is checked.
This is what I am not understanding. When the 18 minute HD project is brought into the burn disc module, it shows only 1.45 GB of data and after the disc is burned, the video file properties found on the disc show a total bit rate of 11,768. As a test with the same project, I did a (create video file>same as first clip) and created a mpg file that is 2.75 GB in size with a total bit rate of 21,649 which seems normal. I understand VS has a max of 18K but shouldn't I be able to create a hybrid disc with a data rate close to 18K. The video at the lower bit rate plays and look ok using my BR player but I wanted to find out if I could create a higher quality video on disc.
I have read probably every post relating to what I think my problem is and after trying a couple of things, I cannot increase the total bit rate of the video on my hybrid disc.
View 14 Replies
View Related
Nov 29, 2010
If the Pro X3 Service Pack includes dealing with AVCHD Lite video files?
It says "...the update provides: Updated camera support – broadened MPEG-4 capabilities add support for additional cameras, including selected cameras from Flip, Canon and more "
Just bought a Panasonic Lumix DMC-Zs7 wich shoots AVCHS Lite HD video and a lesser quality .MOV files as well. I wanna know if Prox3 can deal with these before I upgrade!! I have Prox2 right now.
View 2 Replies
View Related
Apr 7, 2011
I'm about halfway through my 30 day trial of VS Pro X4, and starting to feel a little more comfortable with the software, but a few things are still puzzling me. Granted I've only scratched the surface of the SW capabilities so far.
I took the plunge and got a new Panasonic HDC-TM90K HD video recorder to replace my old 8mm analog Sony. I've only had the opportunity to use it several times, so far so good.
The Panasonic camera comes with HD Writer AE 3.0 software. Pretty rudimentary compared to VS Pro X4; does the basics, trimming, titles, transitions etc. Not bad, it works, but definitely not as sophisticated as VS Pro X4. However I need software that can capture the 8mm tapes I'm converting, which the Panasonic SW cannot, really don't want to learn/use two software packages so hence trying to focus on VS Pro X4. See thread viewtopic.php?f=1&t=41255 for my question re: mpeg compression.
Using the Panny HD Writer SW I was able to capture and burn AVCHD DVD's from the Panny camera SW without issue, not too difficult considering this is my firt time doing all this stuff. AVCHD DVD's play just fine on my Sony Blu-Ray.
I tried capturing the same video content from the Panny camera with VS Pro X4 and could not. VS Pro X4 is stating there is no camera attached. I believe the Panny SW is hijacking the USB connection first and hence is controlling the connection to the camera. I tried looking for some services that the Panny SW has running and closed the auto-run of the Panny SW, but still no luck. I haven't tried uninstalling the Panny SW, that's next.
I was however able to import the files from the Panny camcorder using the import function in VS Pro X4 by selecting the files I wanted. Imported files are the exact same size as the files imported in the Panny HD Writer AE 3.0 SW.
Was able to make a simple little video by adding a title, couple of transitions between clips etc, couple of chapter markers. All went fairly well. Then did "Share > Create Disc", used the default (only) disc template that came in the VS Pro X4 SW trial, selected AVCHD and burn disc, no issues, until I went to play the disc in my Sony Blu-Ray. Once the action in the video picked up and there was significant motion in the video the video started to break up, don't know the technical name for it, digital artifacts maybe? It doesn't look like the deinterlacing examples I've seen, which appear to be unaligned thin lines, this is more blotchy, like blocks of data not being filled in.
So then I tried it again and selected 2 pass conversion, this time it worked, which is good, but does that need to be done anytime your burning HD content to a AVCHD DVD?
View 8 Replies
View Related
Mar 2, 2011
I am editing a video using VS X3 and am using both AVCHD 1080i and AVCHD lite 720p clips.
What would be the best format to retain quality when I render as a file and then copy onto a USB stick to play on my Bluray player? My player seems able to read most formats.
View 7 Replies
View Related
Oct 18, 2013
In order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
View 3 Replies
View Related
Feb 23, 2013
In VS X4 Create Video File there are several AVCHD settings.what the difference is between AVCHD 1440 x 1080P and AVCHD 1440 x 1080 ?With and without "P"?
View 4 Replies
View Related
Aug 20, 2011
I have a h.264 video file in .m2ts format, captured using a TV card, and I want to burn this to an AVCHD DVD. I've been trying to do this with VSX4. I don't want the video to be re-encoded because it's already in a suitable format. If I open X4, and then Create Disc and insert the video, the video plays fine and everything looks OK. However, when I click Burn on the final screen, I get a message saying that the video will take some time to render (oddly, since I've chosen the option not to convert compatible files, and VS seems to be taking notice of this choice because if I de-select it, the video size on the disc indicator increases). If I click OK, the rendering process seems to start but it jumps to 3% and then nothing happens. It just sits there.
I thought maybe VS had a problem with the video, so I tried inserting it onto the timeline, and I can edit and output it from there without any problems. But, I can't burn it to AVCHD DVD without re-encoding it, which I don't want to do because it will reduce the quality of what is already a compatible file.
View 14 Replies
View Related
May 28, 2011
I'm trying to match the project settings to an imported HD video clip (1920x1080 *.mts).I've been using videoStudio for years but only in 720x480 SD. I just got a Panasonic HDC-SDT750PP HD camera and want to make sure the video output file makes the most out of both camera and X3 but in project settings it only allows 720x480.
Does the project setting have any affect on the final video file?The properties of the video file says 1920x1080 24b H264 yet the source file extension is *.mts
My intention is to create a HD video file that I burn to a Hybrid DVD until I get a Blu-ray burner but what format to save the file in if the X3 project setting only goes to 720x480.
View 2 Replies
View Related
May 29, 2011
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
View 14 Replies
View Related
Dec 27, 2011
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
View 9 Replies
View Related
Sep 19, 2012
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
View 8 Replies
View Related
Oct 31, 2011
I am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
View 14 Replies
View Related
Apr 5, 2012
I purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard
Intel Core 2 DUO 2.66GHz
3 GB DDR2 800 MHz Ram
Nvidia GeForce GT220
Asus Xonar DG 5.1 Sound Card
Hard Drive: 2- 320 Gb drives
Monitor: eMachines E2024
WinXP SP3
View 4 Replies
View Related
Sep 4, 2011
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
View 5 Replies
View Related
Oct 9, 2011
I have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
View 14 Replies
View Related
Sep 30, 2012
I recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
View 3 Replies
View Related
Dec 29, 2010
I am using VS 10 and I have successfully captured all the video needed for this project (DV format). My project is an interview where I used 2 cameras during the recording session. On one camera I used a microphone and I want to use that audio throughout the project for consistency. At the beginning of the session I recorded a timer from my laptop screen to better sync the video during editing.
I placed one camera video on the video track and the other on the overlay #1 track. I moved the overlay clip so it matched the frame of the timer on the video track. The 2 tracks synched up perfectly. How to cut back and forth from the second camera. I extracted the video track audio to the audio track thinking I could just cut the video track and the overlay track and slide the overlay track up to the video track. But, it won’t let me cut the overlay track. By the way, while not an expert,I am also not a first time user with the software as I have made a number of projects over the years.
View 8 Replies
View Related
Jan 29, 2013
I was following the old instructions on the recommended way of working with UVS10+ re DVD creation, i.e. do the work on the project save as a video file then come back into UVS10+ with a new project with nothing in the timeline (old computer Win XP, for burning I have a video editing profile) when ready to go into burn phase. In burn phase did the title, added transitions between the 10 clips, let UVS10+ auto add chapters between clips.
Kept all burn phase properties the same as the original, with smart render (no re-render of compatible MPEG2).
Burnt it on to a DL disc, all seemed hunky dory (but took ages to do the title) until came to play it, and then I found that the sound had gone progressively out of sync on the DVD.
The video files are kept on an external hard drive connected via USB. To be honest the old XP computer does run very slow now, as they all do with time as leeches attach themselves and drain speed and resources.
My question is what are the usual suspects for sync problems ? Data transfer from external hard drive ? Project settings in burn phase different from edit phase ?
Would it be better to create an iso on the internal C-Drive, then burn from the iso ? NB whatever USB port I attach devices to front/rear etc. I have always got the message this device can run faster, searched the net tried all the tips to no avail.
However this did not prevent me from creating single layer DVDs without sync problems in the past using this set-up/way of working, but PC is way slower now.
I guess the PC's effective speed might be in the frame ? How far back will the 'rot' go ?
Should I go as far back as putting the converted clips into the time line in the edit phase (totally new project), or will the VSP project/video files be ok, i.e. problem at data transfer/burn stage.
I'm thinking about re-doing the XP user profile to ensure that later installs have not cluttered all the profiles on the machine, i.e. including the video editing profile.
View 2 Replies
View Related
Mar 3, 2012
Using Pro X4
I have a video file, I have an audio file. Video is loaded in the video track, audio in the Voice track.
HOW in the ... do I sync them? I have the mixer on, I can see the wav graphics, I can see where I want them to line up but either the Video track must slide forward ( and it won't, it's locked on 0 ) or the audio track must slide backward (but it won't slide below 0 start) I've tried splitting, clipping... I can't get it cut just right. All I want is time frame 0 for the video to start at positive time frame within the audio.
View 2 Replies
View Related
Jul 16, 2011
how do i add a video in the middle of timeline without changing the sync between other videos/audios in the rest of timeline ?
for example when i add a video(30sec.) at min.(1) , all the videos after min.(1) is shifted for 30 sec. , but all audios+images+titles (AFTER 1st min.) is still in it's same time , so the syncing is gone.
View 1 Replies
View Related
Jan 16, 2012
I'm trying to edit a music performance shot with multiple cameras, both video and still, using VS X4. I'd like to e.g. insert (full-screen pan & scan) still pictures into the video stream with video cross-fading in and out, but I cannot find a way to get a satisfactory end result without breaking audio/video synchronization.
I've tried the following:
a) Put the picture on the overlay track. If I now put cross-fades on the overlay track, the fades are to/from black, not between main track video and overlay still, which is not the desired result. It is expected functionality, though, so no bug there.
b) Put the picture on the same (main) track with the video. First, I split the audio to a separate audio track to keep it intact. Then I split a piece of video out using chapter markers as guides and replace the cut-out piece with a still picture of equal duration. So far audio sync remains fine. But if I now insert cross-fades into the main track, it gets out-of-sync with the audio with every cross-fade (video gets shorter, probably to compensate for the audio missing in the still pictures?), and it is really cumbersome to manually repair sync after every transition.
Would there be any way to get cross-fades in for multi-camera processing without messing audio synchronization? Some nice function key (press CTRL/SHIFT/ALT etc. while dropping the transition onto the overlay track to force it to process between the overlay and the main video track instead)?
View 3 Replies
View Related
Jan 28, 2012
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies
View Related
Dec 25, 2012
One of my main complaints with Lightroom 4 is that I can't seem to export video at a custom resolution or bitrate (like dvd size for instance). Am I missing something, or is this really not possible? I hate having to use Handbrake to archive my videos - I wish I could just do it all in Lightroom. I'm using Lightroom 4.3
View 7 Replies
View Related
Jul 19, 2009
Is there a way to load AVCHD videos (.mts or .m2ts) in Photoshop Extended CS4. Given premiere CS4 can read them I would hope PS does too, but when trying to load one, it says it is not the right kind of document.
View 3 Replies
View Related
Feb 7, 2014
Have been using the Lightroom 5.3 (CC) keyword / collection functions to prepare 2'500 AVCHD video files.
How do I get them to be recognized in Premier (CC)?
View 6 Replies
View Related
May 19, 2013
Adobe PS Elements 11 - No Sound >
Importing video AVCHD (home video) - video plays fine....but i hear no sound.
Pumped up volume on PSE video screen and computer master volume...but still no sound. It cant be that difficult to get sound...could it?
All i did was import the video from my C drive into PSE 11. When i play the video on windows media player, it plays fine. I hear the sound perfectly at 5.1 surround. So i know the movie file is good.....so why wont the sound import into PSE 11?
My camcorder is new 2013. SonyHD w/ 5.1 surround sound
I would think there would be no compatibility issues since i am using latest PSE 11 and a newer camcorder.
View 1 Replies
View Related
Jan 28, 2014
I have lightroom 5.3 running on Windows 7 64-bit. I am unble to import AVCHD video files from my Sony DSCRX-100. I am not sure why, as lightroom 5 supports this video format.
View 1 Replies
View Related
Mar 16, 2014
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio!
View 6 Replies
View Related
