VideoStudio :: Video Track Holding Sync With Music Track
Jan 28, 2012
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies
ADVERTISEMENT
Dec 9, 2013
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
View 2 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Jan 17, 2012
I see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies
View Related
Apr 26, 2013
I must have turn off a switch somewhere, after rendering a project I found the music track is not included. I can hear the music track in edit and preview. But after render the project, the audio attached with the video is ok except no music.
View 1 Replies
View Related
Sep 30, 2013
I am using VS4. Is there a way to equalize audio music tracks? I know that there is a "normalize audio " option just prior to burning but that is for videos only. For whatever reason the last two videos I have made have varying audio volumes on different music.
View 2 Replies
View Related
Dec 9, 2011
It is quite obvious you can change the duration for any individual photo display time on the video track. I also see that you can stretch or compress the music track to fit time of the slides. However, this would distort the audio track to some extent. Is it possible to select some or all of the photos and automatically set an average time so the sequence will equal the play time of the audio (ideally one file, multiples, or complete audio track)? Also, Is there an upper limit on the number of photos that can be in the video track (obviously there would be an upper size limit for a given media that would be used)? What are some of the upper limits reported and have rendering issues resulted at some poin?
View 1 Replies
View Related
Mar 20, 2011
In VSX4, when laying a background music track for a project, is it possible to raise and lower volume of sections of the track along a continuous track of music?
View 1 Replies
View Related
Jan 31, 2011
When I create a new Project I can't browse for new music. I press the Browse key and "Desktop" and "My Computer" come up but when I click on "My Computer" nothing happens.
Browsing works fine when I'm not in Project.
View 8 Replies
View Related
Mar 6, 2013
I just got done installing the Corel Videostudio Pro x6, I am trying to import my own personal music-audio file into the music track, however when I do the system crashes or another way of saying it, a window pops open saying Corel has stop working. This same problem happen with the x5 Pro version. I notice that the pre-loaded audio files in Corel are files of MPEG-1...do I need to convert my MP3s into MPEG-1 in order for this to work?
I have a few converting tools but none of them can convert MP3s into MPEG-1..
View 2 Replies
View Related
Aug 24, 2011
Does it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
View 3 Replies
View Related
Feb 24, 2012
I'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn
1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.
View 11 Replies
View Related
May 23, 2012
Upon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies
View Related
Oct 28, 2012
I am using VS5 for the first time by creating avi files in Proshow Producer and importing them into video studio to make a show with both video and still images. My question is; once clips are imported to the video track can they be moved left or right? The reason I ask is the videos made in Producer are not necessarily in the order of the finished show and I would like to move the clips around to make the flow of the show smoother. When I try to move the clips on the video track they won't move left or right but only up or down in the overlay track. When I move the clip where I want it and move it into the video track the clip snaps back into it's original position. Is moving the clips into the overlay track the only way I can put them where I want them or am I missing something?
View 9 Replies
View Related
Feb 5, 2011
I'm VERY new at Corel Videostudio Pro X3.How do I move the video track in the timeline? I can't make it work unless the clip is in the overlay track.
View 7 Replies
View Related
Apr 14, 2013
I made a 4 minute video comprising 25 clips including background audio and an accompanying "Auto Music" Music track.At present the background sound of the kiteboarding video is too loud and overpowers the music.
How to I reduce the volume of the entire 4 minute video track in a single procedure? If I open Sound Mixer I only see a way to adjust individual points in each of the 25 individual clips. So changing it this way would involve a ridiculous amount of work. Ideally I would like to simultaneously reduce the background water action sound to about 25% of current lever for the entire video track. Then perhaps go back in and bump it up again in one two two spots to accentuate things. I can select the entire video track with shift/enter but then most of the menus are greyed out. Also tried splitting audio from video but it only does it for one clip at a time. Surely there is an easier way?
Background: I am new to videostudio after deciding Adobe Elements which came with my HP laptop is too complex for what I want. All I want is a simple video editing package. So that I can take kiteboarding video from a GoPro, cut it down to something worth watching and adding non copyright background sound. I can then put it on my iPad or share it to friends via youtube. So I am trialling VideoStudio X6 which seems to fit the bill. Dealing with the audio is the only bugbear I have and I want to work it out before I buy it. I cannot believe it can be so complicate to bump the background audio volume down a few notches.
View 3 Replies
View Related
Jun 9, 2011
I am putting together a biographical video of my wife and myself for our kids (married 50 years). I want to have a video of her (example) sitting and talking about growing up. Is there a way to insert a photo on the main video track and still keep the voice track intact? Example: She is talking about her childhood. A photo apears of her as a small girl while she is still talking. The photo goes away after a few seconds and there she is live and taliking. I hope to get away from using the overlay track.
View 6 Replies
View Related
May 15, 2012
Is there a way to show more than just one thumbnail from a given clip when inserted into the video track? Currently in VS X4 I get just a thumbnail at the start of the clip and a blue bar after that. In Microsoft Movie Maker by comparison you get thumbnail after thumbnail from the various frames within the clip, I also see in one of Trevor's tutorials (bottom of the page) URL.... there's thumbnails galore but he may be using images rather than a video clip.
View 3 Replies
View Related
Feb 26, 2011
When I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
View 14 Replies
View Related
Aug 20, 2013
What is the difference between the Video track and the Overlay tracks?
I noticed that I cannot trim the "overlay" clips, but when I added some screen recording to my folder and placed it on the timeline, it automatically goes to the Overlay track. And from there, I cannot trim them as the scissors icon is greyed out. Is there a way to add those clips to the video track instead of the overlay track if there is no other video in the way?
View 13 Replies
View Related
Mar 1, 2012
I am assembling a project with a few video, overlay and audio clips. Everything is timed the way I want, but I decide to add a few seconds to the beginning. I insert the additional clip and all the video clips move over, but all the other clips (overlay and audio) do not move. It takes a long time to adjust everything and get the timing correct again.
Is there anyway to LOCK the audio and overlay clips to their corresponding video, and have them move together when I insert video in the beginning?
View 3 Replies
View Related
Jul 6, 2011
I'm using VS 11. Is there a way to insert gaps between clips on the main video track? I can do this when I move the clips to the overlay track, but I need the overlay track for actual overlays, so I don't want to do that for this project. I need gaps so I can put in narrative text between each clip.
Alternatively, is there a way to have multiple overlay tracks?
View 1 Replies
View Related
Mar 31, 2012
I want to keep the original audio captured with video footage but remove the actual video and replace it with other video footage taken and still images. I'm guessing that this is possible using the overlay track, but ideally, I would like to just remove the original video so that I can use two new images between the main track and other "images" on the overlay track. I have no need for the original video, just the audio. Is this possible? If not, is there any way to insert audio from video onto either a music or narration track scrap the video portion?
View 3 Replies
View Related
Oct 17, 2010
If I have two cameras pointing toward one subject (say someone being interviewed) what would be the best way to place the two video tracks in X3?
One I would be the main video track, but would the other have to be the over lay track? Is there an option to create a 2nd main video track that I could switch between? So when I am editing an interview clip I could pick between video track 1 or 2 and choose the angle I want?
View 8 Replies
View Related
Oct 27, 2010
Is there a way to show the voice pattern and the clip in video track one. I want to see the voice print, so I can make a cup without cutting off part of a sentence when cut out part of a clip.
View 3 Replies
View Related
Jan 19, 2011
I see that I have to enable Ripple Editing to lock my titles with the video track before adding more scenes, but I can't seem to find where to do this.
View 2 Replies
View Related
Apr 18, 2014
I need to fade a music track in and out but I'm not able to add keyfrmaes with the pen tool. And the Add Keyframe button next to the audio track in sequence is greyed out.
View 5 Replies
View Related
Jun 14, 2011
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies
View Related
Feb 14, 2012
How do I select more than one music track for a LR3 slide show?
View 2 Replies
View Related
Feb 20, 2014
Or can I? "Link" is greyed out
View 8 Replies
View Related
Aug 15, 2011
I'm curious how many of you use note track in the track view/dope sheet? It is running damn slow here, 15sec to add a note track, 30sec adding a note in dopesheet and 1 mins before I could open up the note editor. I doubt it is being useful at all.
Moreover, the infamous Max MotionClip Manager bugs is caused by that... so do you really use it?
View 1 Replies
View Related
