Is there a way to show the voice pattern and the clip in video track one. I want to see the voice print, so I can make a cup without cutting off part of a sentence when cut out part of a clip.
View 3 RepliesIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
Is there a way to show more than just one thumbnail from a given clip when inserted into the video track? Currently in VS X4 I get just a thumbnail at the start of the clip and a blue bar after that. In Microsoft Movie Maker by comparison you get thumbnail after thumbnail from the various frames within the clip, I also see in one of Trevor's tutorials (bottom of the page) URL.... there's thumbnails galore but he may be using images rather than a video clip.
View 3 Replies View RelatedI have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
I have an
Acer Aspire 5250
x64
AMD C-50 1GH x 2 cores
BIOS Acer v1.01 4/21/11
SMBIOS 2.7
RAM 4GB (MAX
sound Conexant
X4 will not record sound only from the built in mics or even worse the sound input jack ===> error can not open the wav in device
Now it seems that this is only when in 5.1 mode - works ok when it's normal mode.....
Does it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
View 3 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedI see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedHow do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies View RelatedI can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies View RelatedI can’t put a border around an overlay track clip once it has been rotated. If I put a boarder around an overlay track clip prior to rotation then it is removed upon rotation.
I use VideoStudio x4.
In edit, when I select Clip and play a clip on an overlay track, there's no sound. Yes, I can first click on the sound mixer and then it plays but what a waste of time. Project will play but then I have to isolate the clip. How do I get sound playing under Clip when the segment is in one of the overlay tracks?
View 12 Replies View RelatedI'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn
1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.
Upon uploading a video clip that already has video sound attached, why am I not able to hear that video sound when I try to edit my video?
View 4 Replies View RelatedI am using VS5 for the first time by creating avi files in Proshow Producer and importing them into video studio to make a show with both video and still images. My question is; once clips are imported to the video track can they be moved left or right? The reason I ask is the videos made in Producer are not necessarily in the order of the finished show and I would like to move the clips around to make the flow of the show smoother. When I try to move the clips on the video track they won't move left or right but only up or down in the overlay track. When I move the clip where I want it and move it into the video track the clip snaps back into it's original position. Is moving the clips into the overlay track the only way I can put them where I want them or am I missing something?
View 9 Replies View RelatedI'm VERY new at Corel Videostudio Pro X3.How do I move the video track in the timeline? I can't make it work unless the clip is in the overlay track.
View 7 Replies View RelatedI made a 4 minute video comprising 25 clips including background audio and an accompanying "Auto Music" Music track.At present the background sound of the kiteboarding video is too loud and overpowers the music.
How to I reduce the volume of the entire 4 minute video track in a single procedure? If I open Sound Mixer I only see a way to adjust individual points in each of the 25 individual clips. So changing it this way would involve a ridiculous amount of work. Ideally I would like to simultaneously reduce the background water action sound to about 25% of current lever for the entire video track. Then perhaps go back in and bump it up again in one two two spots to accentuate things. I can select the entire video track with shift/enter but then most of the menus are greyed out. Also tried splitting audio from video but it only does it for one clip at a time. Surely there is an easier way?
Background: I am new to videostudio after deciding Adobe Elements which came with my HP laptop is too complex for what I want. All I want is a simple video editing package. So that I can take kiteboarding video from a GoPro, cut it down to something worth watching and adding non copyright background sound. I can then put it on my iPad or share it to friends via youtube. So I am trialling VideoStudio X6 which seems to fit the bill. Dealing with the audio is the only bugbear I have and I want to work it out before I buy it. I cannot believe it can be so complicate to bump the background audio volume down a few notches.
I am putting together a biographical video of my wife and myself for our kids (married 50 years). I want to have a video of her (example) sitting and talking about growing up. Is there a way to insert a photo on the main video track and still keep the voice track intact? Example: She is talking about her childhood. A photo apears of her as a small girl while she is still talking. The photo goes away after a few seconds and there she is live and taliking. I hope to get away from using the overlay track.
View 6 Replies View RelatedWhen I apply a transition to a clip on the overlay track (and/or title track) the transition is applied to the video on the video track... even if the clip on the video track is 'in the middle' to where the transition is on the overlay track. e.g. If I apply a dissolve (or any transition) to the overlay clip... the clip on the video track will go through said transition also. VSX4
In other words, the clip on the video track goes through the transition applied on the overlay or title track.
This does not seem right. I saw nothing in preference that would affect this and I saw no way of 'de-parenting' the video track with the overlay or title track. (By de-parenting I mean separating the tracks so what happens on one does not affect the other.)
What is the difference between the Video track and the Overlay tracks?
I noticed that I cannot trim the "overlay" clips, but when I added some screen recording to my folder and placed it on the timeline, it automatically goes to the Overlay track. And from there, I cannot trim them as the scissors icon is greyed out. Is there a way to add those clips to the video track instead of the overlay track if there is no other video in the way?
I am assembling a project with a few video, overlay and audio clips. Everything is timed the way I want, but I decide to add a few seconds to the beginning. I insert the additional clip and all the video clips move over, but all the other clips (overlay and audio) do not move. It takes a long time to adjust everything and get the timing correct again.
Is there anyway to LOCK the audio and overlay clips to their corresponding video, and have them move together when I insert video in the beginning?
I'm using VS 11. Is there a way to insert gaps between clips on the main video track? I can do this when I move the clips to the overlay track, but I need the overlay track for actual overlays, so I don't want to do that for this project. I need gaps so I can put in narrative text between each clip.
Alternatively, is there a way to have multiple overlay tracks?
I want to keep the original audio captured with video footage but remove the actual video and replace it with other video footage taken and still images. I'm guessing that this is possible using the overlay track, but ideally, I would like to just remove the original video so that I can use two new images between the main track and other "images" on the overlay track. I have no need for the original video, just the audio. Is this possible? If not, is there any way to insert audio from video onto either a music or narration track scrap the video portion?
View 3 Replies View RelatedIf I have two cameras pointing toward one subject (say someone being interviewed) what would be the best way to place the two video tracks in X3?
One I would be the main video track, but would the other have to be the over lay track? Is there an option to create a 2nd main video track that I could switch between? So when I am editing an interview clip I could pick between video track 1 or 2 and choose the angle I want?
I see that I have to enable Ripple Editing to lock my titles with the video track before adding more scenes, but I can't seem to find where to do this.
View 2 Replies View RelatedWorking with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies View RelatedMy video material holds two voices that were recorded on CH1 and CH2 in mono, resulting in a stereo clip that has one voice on the left channel and one voice on the right channel. So far I always duplicated the audio clips and use fill right and fill left. I just found out about channel mappings in CS2 and CS3, but for my actual project it is too late since it is cut already. It is my first project I'm doing in CS2 and after it is finished I will install CS3. So my first question is: When I use the channel mapping command, how are the resulting mono channels handled in the master? Will each mono channel fill the right AND the left channel of the stereo master track?
With delight I found out that the channel mixer in CS2 allows to use fill right and fill left effects, so I don't have to drag the effects on each clip separatley.
My second question is regarding the mixing of the two voices. Since we couldn't afford to have a professional sound engenieer at the shoot the channel of the voice that was not talking wasn't turned down, so the second voice will be heard on the other channel when the two people stood close together. Is there a more efficient way to mix the two voices instead of using rubber bands to bring down one voice when it is not talking? It's a hell lot of work.
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies View RelatedI'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies View Related