I have an
Acer Aspire 5250
x64
AMD C-50 1GH x 2 cores
BIOS Acer v1.01 4/21/11
SMBIOS 2.7
RAM 4GB (MAX
sound Conexant
X4 will not record sound only from the built in mics or even worse the sound input jack ===> error can not open the wav in device
Now it seems that this is only when in 5.1 mode - works ok when it's normal mode.....
In VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I have noticed that it is possible to overlap sound clips. Just wanting to know does this automatically add fade to the end of the first clips and start of the second clip - my testing could not confirm that. Also is there some documentation on overlapping sound clips as I could not find anything in the handbook.
Also a possible problem I have encountered (I could repeat it too). When I add a video clip to the overlay track at times when I select it (left mouse click) VS Pro X4 appears to FREEZE and I cannot do anything within VS such as select something else. If I then select 'Show Desktop' (from the icon in my quick start bar) and then click anywhere in the desktop and then reselect VS from the bar at the bottom of screen I am returned to VS and it is not in freeze mode again.
Is there a way to show the voice pattern and the clip in video track one. I want to see the voice print, so I can make a cup without cutting off part of a sentence when cut out part of a clip.
View 3 Replies View RelatedDoes it make an audible difference if I use the voice over track for music?I do a lot of audio synch and I sometimes put the music track in the voice-over track. This happens because the audio track that I am using comes from a video clip. One video has good quality video and bad quality audio; the other one has poor quality video, but good audio. So I keep the video from one and the audio from the other. After synchronizing the 2 videos, the sound is also synchronized. When I split the audio from the video file, it automatically drops into the voice over track and if I don't move it the the music track, it stays there.When listening to the final result, I don't hear a noticeable difference, but is there one?In other words, is one of these tracks more suitable for music.
View 3 Replies View RelatedWhen cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedI see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View RelatedI have been unsuccessful in adding voice over to a project that I have created. Have tried using both the built-in microphone on my laptop and a plug-in one. When I activate voice-over the adjustment for volume does not function and nothing is recorded when I try.
View 6 Replies View RelatedAt the EDIT step, the voice level of each HD clip is in reasonable level, but during playback of the entire project the voice level droped down. Also after rendering the voice level is still low. On the other side, the voice level of imported music from audio CD doesn't changed. Is it suppose to be so? I am using the Pro X4 program.
View 8 Replies View RelatedIn VS x3 I had the ability to tweak voice sounds. The voice track could be made to sound like chipmunks or various other sounds. Now with X$ that ability seems to be gone.
View 3 Replies View Relatedcan we remove noise from audio voice overs using video studio x3??????
View 1 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedI have exploded my assembly in a presentation file, but I have not been able to record it. I have recorded videos previously, but this time the record button simply does not stay pressed. I have tried recording the video as WMV and as AVI.
View 8 Replies View RelatedCan I record audio from a mic with pro x4
View 4 Replies View RelatedI am making a video tutorial on using a desktop publishing program. Everything is recording fine EXCEPT when I hover over a tooltip or click for a drop-down box. I can see the tooltips and drop-down boxes during the recording session, but (how odd!) VideoStudio doesn't record them.
When I play the wmv file, the cursor hovers over an invisible tooltip and the cursor moves down the invisible options in the invisible drop-down box.
I have used Camtasia for screen recording for a long time, however I purchased two 24 inch wide screen monitors with a resolution of 1920x1080. Camtasia recording will not record a full screen at this size.......in fact, they recommend 1280x720! So, I updated my VSP from x4 to x5 due to it now having screen capture. VSPX5 will not record full screen 1920x1080 at all (already mentioned in a previous post and currently under reveiw with Corel). It seems the limit is 1676x943 and even then, part of the screen is chopped off if one has a wide screen. Resolution has to be reduced. This is a PITA!
In order to do my screen recordings I either have to reduce the resolution which I do not like to do as it distorts everything on my screen, or reduce the size of the page to record and fit it within a custom size. Not the best, but it's a workaround.
A problem with recording narration has just started with my Pro X4. On playback the recording is not complete and the nearest description is that it is stuttering. I have tried recording several different phrases in different parts of the video and using two different mics but each time get this stuttering.
View 2 Replies View RelatedIs there a way to record a narration without recording video?
Or do I have to cheat the system and record both audio/video to then remove the video track?
I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies View RelatedI used the Screen recording feature to record a little tutorial that is about 4 minutes long. I was shocked, when I watched it afterward, to hear that the sound, although fine at the start, gradually becomes fainter, higher pitch, and overall totally unusable. I thought it was just a fluke but I tried it with 3 videos, and I always get the same problem. I used the settings by default, changing only the file name and location.
Is there more to set for the screen capture to work correctly?
My version is VideoStudio X6. Since the update to Windows 8.1 I have been having this error message every time I tried to record the screen. The message shows "An error occurred on your audio device." and it can't record. The drives're up-to-date, I've checked on the devices they all work fine. I need to record system sounds, however I tried to switch to another device but the error kept appearing. I also wondered if there's an error why would the app not showing the detail of the error but just describe it as "an error" because it's so vague it can be anything.
View 7 Replies View RelatedWith VS Pro X2 is it possible to remove or reduce the lines on sections of an old VCR recording as shown in the attachment?
View 8 Replies View RelatedI make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
I'm trying to record from the pinacle 700-usb device in Corel VideoStudio, however it gives me an error saying: "Kan vastleggrafiek niet starten" (it's dutch). Meaning something like "Cannot start the recordinggraph" (or something like that). The error is shown below.
I can record and playback from my webcam. That works perfectly, so it is installed correctly i suppose?what causes this and how can i make VideoStudio record from my pinacle device?
I want to use an external audio recording device to record the sound. I want to disable the audio track from the camera and sync the audio track from my external device with the video from the camera. All of this in editing.
View 10 Replies View RelatedScreen Capture is not recording menu items in FL Studio
I am recording a series of video tutorials for the audio production software FL Studio. I have duplicated the problem in two version of FL Studio, FL Studio 8 & FL Studio 9. I start a screen capture and everything is recording fine. Part of my tutorial includes selecting a menu item in FL Studio. After my recording is finished I am noticing that the menu (dropdown) is not displayed in the screen capture. I can see the mousing clicking the menu items but the menu is not displaying. All other aspects of screen capture are working perfect.
I am using Corel Video Studio X5. No updates to the program have been made, the computer I am using it on was only connected to the internet during activation.
I've set up a visibility track on a very simple scene, changed to the scanline renderer, and it just does not work
View 4 Replies View RelatedIs there A away to Use the Camera Record button to Control the Recording and Pausing of the Captured Video within Corel?
View 3 Replies View RelatedI recently started using my DSLR (Nikon D800) to shoot some video. My wife has several musical projects and I'm just shooting some basic demo videos. But since these are musical projects, the audio is important. And while I plug the camera microphone port directly into the mixing board, and get really good audio, I still want to be able to work with the audio track separately to do some basic equalization, volume adjustment, etc.
Photoshop's video handling is pretty basic, and it seems all I can do with the audio track is delete it, adjust the master levels, or add an outside track.
Is there a way I can strip off and save the audio to a separate file and process it with audio software (what software?) so I can then re-add it Photoshop?
Am I approaching this from the wrong angle? I don't want to spend tons of money on a full video editing package. Is there audio software that can open the video file and just edit the audio track?
I have a problem with Video-Studio ProX 4: If I insert a new file in the midst of a cued sequence of files, than the cued video-files of the video track give place and stay synchronized, but NOT the subtitles on the title track - therefore I must they all manual synchronize again with the video-track, - what can I do?
View 2 Replies View RelatedI've installed NewBlue ColorFast, and it shows up in VS X6 as expected. If I drag and drop it onto the video track, the changes I make apply, no problem. But if I drag and drop it onto the overlay track, then make the changes I need, they don't stick … they go away when the dialogue is closed. Is this filter limited to the video track only? Or do I have a problem here?
View 6 Replies View Related