VideoStudio :: Error On Audio Device And Can't Do Screen Recording
Nov 15, 2013
My version is VideoStudio X6. Since the update to Windows 8.1 I have been having this error message every time I tried to record the screen. The message shows "An error occurred on your audio device." and it can't record. The drives're up-to-date, I've checked on the devices they all work fine. I need to record system sounds, however I tried to switch to another device but the error kept appearing. I also wondered if there's an error why would the app not showing the detail of the error but just describe it as "an error" because it's so vague it can be anything.
View 7 Replies
ADVERTISEMENT
Jan 20, 2011
I want to use an external audio recording device to record the sound. I want to disable the audio track from the camera and sync the audio track from my external device with the video from the camera. All of this in editing.
View 10 Replies
View Related
Dec 8, 2013
I make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
View 2 Replies
View Related
Jul 6, 2013
when i want to record the monitor screen and press the record buttton of video studio pro x6, i get the message: "there is an error with the audio device" (my version is german, so it says something else, but this is what it means)
i clicked on the I of I/O on "internal audio signal"
i already read somewhere else, to go to control panel->sound-> recording tab->enable/activate stereomix, but no change...
View 1 Replies
View Related
May 1, 2011
I'm trying to record from the pinacle 700-usb device in Corel VideoStudio, however it gives me an error saying: "Kan vastleggrafiek niet starten" (it's dutch). Meaning something like "Cannot start the recordinggraph" (or something like that). The error is shown below.
I can record and playback from my webcam. That works perfectly, so it is installed correctly i suppose?what causes this and how can i make VideoStudio record from my pinacle device?
View 1 Replies
View Related
Mar 4, 2012
Can I record audio from a mic with pro x4
View 4 Replies
View Related
Sep 25, 2011
A problem with recording narration has just started with my Pro X4. On playback the recording is not complete and the nearest description is that it is stuttering. I have tried recording several different phrases in different parts of the video and using two different mics but each time get this stuttering.
View 2 Replies
View Related
Oct 9, 2013
I am making a video tutorial on using a desktop publishing program. Everything is recording fine EXCEPT when I hover over a tooltip or click for a drop-down box. I can see the tooltips and drop-down boxes during the recording session, but (how odd!) VideoStudio doesn't record them.
When I play the wmv file, the cursor hovers over an invisible tooltip and the cursor moves down the invisible options in the invisible drop-down box.
View 5 Replies
View Related
May 14, 2012
I have used Camtasia for screen recording for a long time, however I purchased two 24 inch wide screen monitors with a resolution of 1920x1080. Camtasia recording will not record a full screen at this size.......in fact, they recommend 1280x720! So, I updated my VSP from x4 to x5 due to it now having screen capture. VSPX5 will not record full screen 1920x1080 at all (already mentioned in a previous post and currently under reveiw with Corel). It seems the limit is 1676x943 and even then, part of the screen is chopped off if one has a wide screen. Resolution has to be reduced. This is a PITA!
In order to do my screen recordings I either have to reduce the resolution which I do not like to do as it distorts everything on my screen, or reduce the size of the page to record and fit it within a custom size. Not the best, but it's a workaround.
View 6 Replies
View Related
Apr 9, 2012
How do I get the audio as well as the video, I am using a VC500 capture device and the video comes in clear but no audio.
View 3 Replies
View Related
Oct 5, 2013
I used the Screen recording feature to record a little tutorial that is about 4 minutes long. I was shocked, when I watched it afterward, to hear that the sound, although fine at the start, gradually becomes fainter, higher pitch, and overall totally unusable. I thought it was just a fluke but I tried it with 3 videos, and I always get the same problem. I used the settings by default, changing only the file name and location.
Is there more to set for the screen capture to work correctly?
View 4 Replies
View Related
Aug 23, 2012
Screen Capture is not recording menu items in FL Studio
I am recording a series of video tutorials for the audio production software FL Studio. I have duplicated the problem in two version of FL Studio, FL Studio 8 & FL Studio 9. I start a screen capture and everything is recording fine. Part of my tutorial includes selecting a menu item in FL Studio. After my recording is finished I am noticing that the menu (dropdown) is not displayed in the screen capture. I can see the mousing clicking the menu items but the menu is not displaying. All other aspects of screen capture are working perfect.
I am using Corel Video Studio X5. No updates to the program have been made, the computer I am using it on was only connected to the internet during activation.
View 5 Replies
View Related
Feb 4, 2011
VS Pro x3 - Trying to do voice over on a project and get the above code. I opened a blank project to test and voice over works OK?
View 2 Replies
View Related
Jul 25, 2013
I have X4 Pro, X5 and X6 Ultimate installed on my computer; as well as, a few older versions of ULead software. I keeping getting this message: "device error. Cannot open the wave-in device" every time I try to use the microphone option in X6 to try and narrate my video.
The microphone option works fine in X5...
The trouble is I am using the track motion option from X6 in my video, so I cannot open the video in X5. Is it some sort of driver problem, or is there a corrupt file that needs replacing etc...
View 4 Replies
View Related
Aug 30, 2012
Now starting to use X5 and found that the "Screen Capture", which is so handy, has audio problem when I capture a person speaking, such as an instructional video. It says it won't record audio if you have Windows XP. So I improvised by using my mic, holding it close to my speaker. Only, the recorded speaking is out of sync with the captured persons lips moving. Regarding this, may I recommend and hope that Corel will do what Pinnacle has done long ago for syncing sound with video... when it's not in sync as in Screen Capture. True, In Corel's Pro X5 I can split audio from video, which sends it to the narration track, which is NOT always available. But in Pinnacle, in their video track on the timeline, I was able to lock the "audio wave form" in the video track, as well as lock and unlock the video track separately. So I was able to unlock the audio in the video track and move only the audio, left or right, until it synced with the video. It made things so much more easy then trying this when the video audio is in the narration track.
View 12 Replies
View Related
Mar 11, 2013
In Video Studio 5 Ultimate, I am trying to use Screen Capture on an application that plays music and has a window with an animation showing the chord progression as it plays. When I try to capture it using Voice as the Audio Settings, it works but the sound is low quality. I assume the reason is that it is recording the microphone listening to the speakers. If I use System Audio as the Audio Settings, then there is no sound in the captured video. I have verified this using Windows Media Player on the clip as well as in Video Studio 5. The sound _is_ coming out of the speakers, and the video part is OK. There _is_ a stereo sound track in the .wmv file that is created, but it is silent.
I get the same result trying to capture Windows Media Player playing a video clip that has sound. It captures the window and the video successfully, but there is no sound. On the other hand, I am able to capture the sound using other programs, such as Freecorder. Thus there is likely nothing wrong with my setup or drivers (and it can be done).
This is on Windows 7, 64-bit. I do not get any message saying System Audio is not available, as I have seen in other posts.
View 4 Replies
View Related
Jul 24, 2011
I just wondered if there's a way to get Video Studio 11.5 to capture video from your PC screen?
I ask because I've been trying to find a free program to do this (not having any money for stuff like Camtasia) when I remembered that I had Ulead Video Studio 11.5 - and I hoped that could do this instead.
Can it? If it can, can it also record audio at the same time? (I have a headset with Microphone)
View 1 Replies
View Related
Mar 13, 2012
In any case, when I try to enable System Audio in the screen capture setup, I get an error message saying that it can't find any system audio.
System audio is working fine on my system, and neither Camtasia, CamStudio nor two other screen capture applications that I use have any problem with this whatsoever.
View 14 Replies
View Related
Oct 13, 2012
I'm running VSP X5 Ultimate with SP1 on a Toshiba i7, 8GB RAM and plenty of HD free space. When using the Screen Capture function and, in Settings, switching to system audio, I get a message that no system audio is detected and that I should enable this on my computer. I'm assuming that "system audio" is the feed to the speakers (both of which are working perfectly) and I've been over everything in both Control Panel>Sound and Control Panel>Realtek (not much there) and can find nothing which would "enable system audio". I've never been able to record with the system audio. I searched the VSP forum with multiple iterations of the problem with no luck.
How can I get system audio working in the screen capture?
View 6 Replies
View Related
Mar 30, 2012
I have a problem with audio in Video Studio 3. When I insert an AVI file into the timeline and edit it, the audio becomes offset with the video. I have tried just inserting the audio but have the same problem.
If I insert the audio file and click on Sound Mixer I can see the waveform of the file. Although I can hear the audio from the start, the first 1 second of the waveform is at zero and the waveform remains 1 second behind the sound.
If I pause the file and click the curser further along then the offset becomes much greater, around 30 seconds.
If I split the clip at say 10 seconds and delete the first 10 seconds then move the remainder to zero on the time scale, the the remaining file seems to have around 30 seconds missing from the start but the waveform shown stays correct.
I have tried with ripple editing turned on and off. Becoming very frustrated when trying to sync four cameras and their audio.
View 5 Replies
View Related
Sep 2, 2011
I have successfully made 20 AVCHD disks in the past 3 months with mp4 format and now have issues. New problem(s):
When I go to create a video file, I choose MPEG4 - HD. I typically have 20-25 minutes of vidoes (720 and 1080), pictures, sound, and crossfade transitions. It renders through the 99% but no new file is created. In addition, I have noticed two other issues/items which could be related. One, the mp3 audio files have a yellow icon and this error appears "Original file [et theme.mp3] doesn't exist.". Two, the video file thumbnails in the Library now have two icons; the normal one identifying it as a video and now a second icon that looks like two.
View 8 Replies
View Related
Nov 10, 2011
I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
"Unable to access the audio codec driver"
View 9 Replies
View Related
May 4, 2012
Is there any way to record a Photoshop maneuver like airbrushing onto an otherwise transparent layer so the end result is an animation?The real world equivalent of what I'm trying to do would be to have a video camera behind glass and a spray can spraying the glass from the other side.
I know there are programs that record what's on screen but I don't think they allow you to have a transparent layer. I may be able to use one of those programs and key out the non airbrush background. I'd like to be able to import the animation into Premiere so it looks like paint has been sprayed over whatever clip is underneath the airbrushing frames.
View 2 Replies
View Related
May 20, 2013
I have completed a slide show and added 3 songs. The songs are showing up on the audio bar at the bottom, but when I do full-screen preview there is no audio. My speakers are working fine, i'm able to play songs from other programs. I am working in PS Elements 9 on Windows 7.
And another question, if i want to burn the slide show onto a DVD - what type should I buy?
View 4 Replies
View Related
Sep 17, 2013
In my project I use an off-screen device to render the scene; I need to tweak some render settings (just load a default preset could be a good starting point), but I can't figure out how to do this with an off-screen device!
View 2 Replies
View Related
Aug 18, 2013
Is there a way to record a narration without recording video?
Or do I have to cheat the system and record both audio/video to then remove the video track?
View 14 Replies
View Related
Jul 12, 2011
I have a problem with Pro X4. With Studio 11 Pro, I was able to view the film during saving to file but I cannot with X4. I can't find a solution in the user guide.
View 1 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
May 20, 2012
I tried to use the trial version of VS 11plus with a Honestech Vidbox NW03 video capture device. I wanted to use VS11plus because I was unhappy with the video quality of Honestech VHS to DVD software. The VS wouldn't allow me to use the Vidbox even after uninstalling the Honestech software. I also tried using VS after uninstalling the Vidbox software. The only device that ever worked with VS for me was a Easy cap. Is Easycap the only device that works with VS or did I do something wrong? I have Vista Home Basic, 2.16GHZ, 3GB Ram and 250GB Hard drive on my laptop.
View 7 Replies
View Related
Feb 8, 2011
I first used the above on a trial basis and had no problems. Then I bought it and I cannot capture my video. I get the no video capture device installed. I have tried 2 different cameras, computers, video capture drivers, firewires and I uninstalled and reinstalled Studio 12 in addition to installed a trial Pro3. I also uninstalled other devices like Flip Software as was suggested by a Corel support person. I am using Windows XP.
View 1 Replies
View Related
Oct 27, 2011
With VS Pro X2 is it possible to remove or reduce the lines on sections of an old VCR recording as shown in the attachment?
View 8 Replies
View Related
