I'm only a few seconds in to my video and a few clips in... and when I play it back I get weird audio feedback like a repetitive noise that appears to be an artifact of decompression. I tried to produce an output to see if it shows up there as well (as opposed to my project view playback) and near the end of processing the short clip, I get an error message:
"Unable to access the audio codec driver"
Seen here on several places on the forum that VSX4 dislike the LAME MP3 codec. Trying to create an .avi-XviD with MP3 audio, so my question is where to get an MP3 codec for the audio in my XviDs that's workable in VSX4?
View 5 Replies View RelatedI just upgraded to X5 and now suddenly I am having difficulty printing to my dell 3110cn laser printer. I get the error, "Unable to access printer driver. Try removing and reinstalling this printer driver". If I click OK I get the error a couple of more times followed by "Internal application error." Then Corel Draw crashes. My PC is running Windows 7 64 bit.
I have tried re-installing the printer driver with the latest from dell and uninstalling and re-installing corel draw, but nothing has worked. I am about ready to go back to X4.
I've had an issue over the last couple weeks with Ae CC where any time I output to uncompressed (audio) codec, no audio is attached. I've verified that my output module was set to Audio Output On. Bringing the file into Pr or back into Ae shows that there is no audio track, even though the setting should have at least made a silent audio track. This happens regardless of the audio format in my composition (.wav, .aif, .mp3), and seems to only occur with uncompressed codec.
Ae CC v12.0.0.404
Windows 7 64-bit
I'm running After Effects CS6 11.0 on MAC OSX and everytime I attempt to apply text, either by creating a new text layer from the drop down menu or dragging open a text box I get "Unable to Access Resource P_TextSmallCaps_Sm_N_D (type png)"
Is this a png file missing from the program, a fixable bug or what?
I've just made my first attempt of transferring my camcorder tapes to DVD using the video studio pro 3, all seemed to be going well until I tried playing them in my DVD player, you can watch the DVD but there's no sound however, if I play the DVD in my laptop it plays as it should (sound and vision).
View 4 Replies View Related[URL]
What I'm doing is trying to CUT some XVID video and save them with their original format via the following steps:
Share > Create Video File > Same as First Video Clip. The progress will go through to 90%, then I will get the error message:
Unable to compress the audio [17103:10:5]
Decompress the original won't be a choice when hundreds tasks are out there.
The detail infomation about the video I'm working on, hope it will provide more details.
xxx.avi
General
Complete name : xxx.avi
Format : AVI
[Code]....
I am running Windows XP, and using Videostudio 11. I know I used to have the DIsable Audio Preview button available when capturing. I have not used the software in about a year and now the button is not available for me to turn off from the capture screen. How can i turn that off? I find that during capture i get less a chance of dropped frames if i turn off the Audio Preview.
View 1 Replies View Relatedhave been looking at various posts regarding audio skipping but am clueless as to how to repair or use this program successfully. I am able to import a simple mp2 file off a DVD (VOB), scan into scenes and usually play it in the timeline without skipping. I can play an mpg clip/scene, at least once, without skipping. Any kind of editing of any file results in skipping. Whether I save as a project or not, it skips. If I export, it skips. With or without Smart Proxy, it skips. With or without SP2 (after a clean reinstall) it skips. I have been editing for at least 7 years with various programs, but this is truly a first. I am really hesitant to upgrade to X4 as a fix, fully expecting it will be more of the same.
I want to clarify something. I listened very closely with a friend and concluded it is not exactly skipping. It is truncated repeating of a word in close succession, so you will hear a word immediately followed by the same word repeated but partly cut off.
when i want to record the monitor screen and press the record buttton of video studio pro x6, i get the message: "there is an error with the audio device" (my version is german, so it says something else, but this is what it means)
i clicked on the I of I/O on "internal audio signal"
i already read somewhere else, to go to control panel->sound-> recording tab->enable/activate stereomix, but no change...
I have a problem with audio in Video Studio 3. When I insert an AVI file into the timeline and edit it, the audio becomes offset with the video. I have tried just inserting the audio but have the same problem.
If I insert the audio file and click on Sound Mixer I can see the waveform of the file. Although I can hear the audio from the start, the first 1 second of the waveform is at zero and the waveform remains 1 second behind the sound.
If I pause the file and click the curser further along then the offset becomes much greater, around 30 seconds.
If I split the clip at say 10 seconds and delete the first 10 seconds then move the remainder to zero on the time scale, the the remaining file seems to have around 30 seconds missing from the start but the waveform shown stays correct.
I have tried with ripple editing turned on and off. Becoming very frustrated when trying to sync four cameras and their audio.
I have successfully made 20 AVCHD disks in the past 3 months with mp4 format and now have issues. New problem(s):
When I go to create a video file, I choose MPEG4 - HD. I typically have 20-25 minutes of vidoes (720 and 1080), pictures, sound, and crossfade transitions. It renders through the 99% but no new file is created. In addition, I have noticed two other issues/items which could be related. One, the mp3 audio files have a yellow icon and this error appears "Original file [et theme.mp3] doesn't exist.". Two, the video file thumbnails in the Library now have two icons; the normal one identifying it as a video and now a second icon that looks like two.
I'm using Video Studio Pro X4. I'm just trying to make a simple, first movie and failing. I have a Sony HD Handycam that produces .m2ts files. I just want to be able to create HD movies that I can play on generic software on my tv. So I assumed I could create an MPG file and play it using Windows Media Player 11. After rendering an MPG file, I get no audio output.
- I imported the .m2ts files into VS
- Put two short clips in the timesline.
- Basic transition.
- Share -> Create Video File -> HDV (tried all options)
- I create the MPG file and I get no sound on playback using Media Player
I would think this is the most basic thing I could possibly be doing and it doesn't work. I am using an underpowered XP laptop, but I would think that would just be a speed issue. I'll get a better desktop for editing, but if I can't perform the most basic of tasks now I'm thinking it's a software issue.
I have a brand new machine with Iintel i7 windows 7 and 8mg ram, just bought VSX5 pro ultimate.
When I try to import "insert" audio file (mp3) I get back an error "file format mismatch" and so I am unable to insert it to the movie.
My version is VideoStudio X6. Since the update to Windows 8.1 I have been having this error message every time I tried to record the screen. The message shows "An error occurred on your audio device." and it can't record. The drives're up-to-date, I've checked on the devices they all work fine. I need to record system sounds, however I tried to switch to another device but the error kept appearing. I also wondered if there's an error why would the app not showing the detail of the error but just describe it as "an error" because it's so vague it can be anything.
View 7 Replies View RelatedUnable to add MP3 file to my slideshow. "system does not have codec installed". I have Windows 7
View 1 Replies View RelatedI have received a bunch of files that are named "clip.dv". I can play them using VLC Media Player. It tells me the file type is "DV Video (dv )". Video Studio X4 will not allow me to import the file.
View 6 Replies View RelatedI have come to find that there is a small segment in my project that says unable to read string and I have deleted the files in that area to see what was causing this error and it does not seem to be video or music in this area.
Because I move the playback marker to the opposite sides of this area and it seems to work fine but once I delete the files in this area and playback it does the same thing to the files that where on the other side of the files once there as the move in. Is there anything that can be done to fix this because I need this video t convert so that I may send it to my professor by January 1 or I will fail the course.
VS starts in Edit Mode. After connecting the video camera by a iLink cable to PC and switching the camera to Play mode, clicking on tab "Capture" an error message appears: "Unable to switch to Capture Mode. Check if your video capture driver is working properly" Question: How do I do it? I am not a computer savvy person, just want to capture, edit and finally burn my videos taken with the camera.
View 2 Replies View RelatedI have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
I just installed Photoshop CC v14.1.2 x64 on a box and it grumbles at me when I launch the program. It says "Photoshop detected an error in your display driver. Update or reinstall the driver and check Use Graphics Processor to retry."
Checking the graphics driver it is indeed up to date.
Setup:
Win7 Pro 64 bit
Video cards: mv video hook driver2 (disabled)
Nvidia Quadro K4000, v9.18.13.2902
The graphics options in Photoshop are simply greyed out.
I have a user who is using Photoshop CS4 on a Dell Optiplex 745, with onboard Intel video. Since I read that Photoshop now uses OpenGL heavily in its operations, and also understanding that OpenGL support is pretty bad on Intels integrated video, we put an Nvidia GeForce8400 card in the PCIExpress slot, and loaded the latest drivers from Nvidia (version 182.50 currently). The user reports he periodically gets the attached error message, "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturers website for the latest software"... Knowing that some other OpenGL-enabled software is picky about what version of Nvidia graphics drivers are installed, I wonder if this is what we're seeing here...
View 6 Replies View Relatedi have had this error for since over a couple of months and i have been udated my graphics card to the latest beta versions.this is what my graphics process settings show URL....
- AMD radion hd 6000 series
-URL.....
it only crashes when i switch tools.
So I have 64-bit Windows 8, 64-bit Photoshop CS6 and an ATI Radeon HD 4770 GPU. When I go to the settings in PS, it tells me that there is a problem with my display driver so I cannot use GPU graphics processing. I would really like these features to be available to me, especially since my GPU meets the recommendations by Adobe. I installed the latest driver from AMD.
View 5 Replies View RelatedI've got a Lenovo Thinkpad R500 running Windows Vista.
I seem to be having an issue with my display driver. Everytime I open Adobe Photoshop, I get an error that photoshop has encountered an error with my display driver, and it does not display images properly (they seem to be very low resolution).
I checked my drivers, and everything is up to date. I even ran Windows Update just to be sure.
I was using CS5.1 for a while with no problems. Everything went well until one day it gave me an error on hardware acceleration. All it did was give me a scrubby zoom. I spent a few days researching it and eventually gave up on finding a solution.
So I thought I'd try out CS6, to see if it fixed anything. It doesn't. It's worse, even. It crashes randomly at various actions (like switching tools, changing layers, saving), and it crashes without fail if I use liquefy or transform a layer and then try to duplicate it (I'm just trying to make a gif, darnit!) If I'm just drawing and erasing and using undo, it doesn't crash as much. Scrubby zoom is still a problem.
My driver is up to date according to the HP website:Intel High-Definition (HD) Graphics Driver2010-12-03 , Version:8.15.10.2189, 78.05MIt's really old, but HP isn't updating it. I've tried uninstalling it and reinstalling it. Moot point.The driver is compatible with OpenGL.
I also tried this driver, but apparently it's not compatible.
Additional info/things I've tried: Processor: Intel Core i5 CPU M 450 @ 2.40GHZ 2.40 GHzRAM: 4GBSystem type: 64-bit No third-party plug-ins. 60% memory available to Photoshop. Photoshop is updated to the latest version.Windows is updated (I spent a freggin day trying to figure that out because updates were frozen, and then spent 3 hours trying to figure out why F8 wouldn't bring up advanced boot options so I can delete old update logs so I can update windows so I can get photoshop working--TO NO AVAIL) GPU support option is greyed out, so it's already turned off.
When it crashes, all Windows says is "Adobe Photoshop CS6 has stopped working". Then the details afterwards note "files that describe the problem", which include...
The C:UsersBaniAppDataLocalTempWER7781.tmp.WERInternalMetadata.xml file, which states:
-<WERReportMetadata>-<OSVersionInformation><WindowsNTVersion>6.1<Build>7601 Service Pack 1<Product>(0x1): Windows 7 Ultimate<Edition>Ultimate<BuildString>7601.18113.amd64fre.win7sp1_gdr.130318-1533<Revision>1130<Flavor>Multiprocessor Free<Architecture>X64<LCID>1033</LCID>
-<ParentProcessInformation>
[Code]......
The C:UsersBaniAppDataLocalTempWER9D1B.tp.appcompat.txt is on pastebin here: [URL]
So I looked up other issues regarding "aticfx64.dll", and nothing works. My last options are either to downgrade again, or to upgrade my video card, but I don't know what kind of video card I need.
I recently upgraded my laptop to Windows 8.1 and now from time to time, I am receiving the error above on the right side of the screen and my photoshop files won't open. Instead it just freezes and becomes unresponsive so I have to close Photoshop from going to 'End Task'. I am using CS6.
View 5 Replies View Relatederror message:"Display driver stopped responding and has recovered" Display driver Intel Graphics Accelerator Drivers for Windows 7(R) stopped responding and has successfully recovered.
This happens when I copy and paste a group of blocks. The screen goes black for 2-3 seocnds then finally recovers.
when I start photoshop, I get a message saying: "Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software. GPU enhancements can be enabled in the Performance panel of Preferences."
I have the latest graphics drivers installed, but this message does not always occur when I start Photoshop although the driver does not change. So, I guess there might be some other reason causing this error message.
I am running Photoshop on a Thinkpad with Windows XP Professional.
I wanted to connect my Euphonix Color Board to Smoke, but in the beginning I get an error message saying that the EuCon Driver is incompatible.So which version is compatible? I'm running Smoke for Mac 2012 SP1, on Mac OS X 10.6.7
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
View 3 Replies View Related
